CNSPEED P16

Contents

CNSPEED P16 OBD2 HUD Digital Speedometer User Manual

Model: P16 | Brand: CNSPEED

1. Introduction

The CNSPEED P16 OBD2 HUD (Head-Up Display) is a versatile digital speedometer designed to project essential driving information directly onto your car's windshield. This device connects to your vehicle's OBD2 port to provide real-time data such as speed, RPM, water temperature, voltage, and more, enhancing driving safety and convenience. It features a TFT LCD multi-color smart display with an integrated light-shading design to prevent glare.

Key Functions & Features:

  • Real-time display of Speed, RPM, Water Temperature, Voltage, Time, Fuel Consumption (instant and average), Single Driving Time, Single Driving Mileage, Total Mileage, Intake Temperature, Engine Oil Temperature, Gearbox Temperature, Air-Fuel Ratio, Turbine Pressure, Intake Pressure, Engine Load, Throttle.
  • Acceleration Test and Brake Test functions.
  • Ability to read and clear car fault codes, and read the entire vehicle data stream.
  • Alarm functions: Overspeed Alarm, Water Temperature Alarm, Voltage Alarm, Speed Alarm, Fatigue Driving Reminder.
  • Works with OBD2 protocol cars.
  • Easy installation (plug & play).
  • TFT LCD multi-color smart display.
  • Switchable multi/simple function display modes.
  • Integrated light-shading design to block screen brightness and prevent glare.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1X P16 HUD Host Unit
  • 1X Type-C Interface OBD Cable
  • 1X Reflective Film
  • 1X Anti-Skid Pad
  • 1X Instruction Manual (this document)
Image showing the P16 HUD unit, OBD cable, reflective film, anti-skid pad, and instruction manual.
Figure 2.1: P16 HUD Package Contents

3. Setup and Installation

The P16 HUD is designed for easy plug-and-play installation in OBD2 protocol compatible cars. Follow these steps for proper setup:

  1. Connect the HUD: Connect the provided Type-C interface OBD cable to the HUD host unit.
  2. Locate OBD Port: Find your vehicle's OBD2 port. This is typically located under the dashboard on the driver's side.
  3. Plug in OBD Cable: Plug the other end of the OBD cable into your car's OBD2 port. Ensure a secure connection. Tidy up the wires to avoid obstruction while driving.
  4. Apply Reflective Film (Optional but Recommended): Clean a suitable area on your car's windshield where you want the display to appear. Stick the reflective film onto this area. This film enhances the clarity and visibility of the projected display.
  5. Position the HUD: Place the HUD unit on your dashboard, ensuring it is stable and does not obstruct your view of the road. The anti-skid pad can be used to secure the unit in place.
Four-step diagram showing how to install the HUD: connect cable, plug into OBD port, stick reflective film, place HUD on dashboard.
Figure 3.1: Easy Installation Steps

Note: No detailed installation guides are included beyond these steps. We highly recommend seeking professional installation if you are unsure about any part of the process. Any damage during installation will not be refunded.

4. Operating Instructions

Once installed, the P16 HUD will automatically power on with your vehicle. The display is designed to be clear and readable in various lighting conditions, thanks to its integrated light-shading design and automatic exposure adjustment.

4.1. Display Modes

The P16 HUD offers multiple display modes, allowing you to customize the information shown. You can switch between these modes using the function switch key on the unit.

Image showing nine different display modes for the HUD, combining speed, RPM, fuel consumption, water temperature, engine load, and voltage.
Figure 4.1: Multiple Display Modes

Examples of display modes include:

  • Simple mode: Speed only
  • Speed + RPM
  • Speed + Fuel Consumption
  • Speed + RPM + Fuel Consumption
  • Speed + Fuel Consumption + Water Temperature + Engine Load
  • All display: Speed + Fuel + Water Temperature + RPM + Voltage + Speedbar + Water Temperature

4.2. Button Functions

The HUD unit features several buttons for control and navigation:

  • Power Button: Turns the unit on/off.
  • Left Click: Used for navigation or decreasing values in settings.
  • Right Click: Used for navigation or increasing values in settings.
  • Function Switch Key: Cycles through different display modes or confirms selections in settings.
Diagram showing the dimensions of the HUD unit and labeling the independent buttons: Power button, Left click, Right click, and Function switch key.
Figure 4.2: HUD Button Layout

4.3. Real-time Data and Alarms

The P16 HUD provides real-time data readings and includes various alarms to alert you to potential issues:

Infographic showing various real-time data points and alarms: Speed, Voltage, RPM, Water Temperature, Fuel Consumption, Automatic Exposure, Speed Alarm, Voltage Alarm, RPM Alarm, Water Temperature Alarm, Fatigue Driving Reminder.
Figure 4.3: Real-time Data and Alarms

The alarms are designed to provide timely warnings for:

  • Overspeed
  • High Water Temperature
  • Low Voltage
  • High RPM
  • Fatigue Driving

4.4. Special Functions

The P16 HUD also includes advanced functions for performance monitoring:

  • Accelerating Competitive Mode: Measure your vehicle's acceleration performance.
  • Brake Performance Test: Evaluate your vehicle's braking efficiency.

4.5. Display Clarity

The HUD is designed for clear visibility in both day and night driving conditions. Its automatic exposure feature adjusts brightness to ensure optimal readability without distraction.

Comparison image showing the HUD display clarity during day and night driving conditions.
Figure 4.4: Day and Night Display Clarity
Image of the HUD on a car dashboard, highlighting its integrated light-shading design to prevent glare.
Figure 4.5: Integrated Light-Shading Design

Video 4.1: In-car demonstration of the P16 HUD in various driving conditions.

5. Maintenance

To ensure the longevity and optimal performance of your P16 HUD, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the display screen and the unit's exterior. Avoid abrasive cleaners or solvents that could damage the surface.
  • Cable Care: Ensure the OBD cable is not kinked or pinched. Periodically check the connections for any signs of wear or looseness.
  • Storage: If you need to remove the HUD for an extended period, store it in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your P16 HUD, try the following troubleshooting steps:

  • No Power/Display:
    • Check if the OBD cable is securely connected to both the HUD unit and the vehicle's OBD2 port.
    • Ensure your vehicle's ignition is on (or engine running) as the HUD draws power from the OBD2 port.
    • Verify that your vehicle is OBD2 compliant.
  • Incorrect Readings:
    • Ensure the HUD is correctly configured for your vehicle type (if applicable, refer to the full PDF manual for advanced settings).
    • Restart the HUD unit by unplugging and re-plugging the OBD cable.
  • Display Glare/Poor Visibility:
    • Adjust the position of the HUD on your dashboard.
    • Ensure the reflective film is properly applied to the windshield.
    • The HUD features automatic exposure; ensure no external factors are interfering with its light sensor.
  • Fault Codes Displayed:
    • The P16 HUD can read and clear car fault codes. If a fault code appears, consult your vehicle's manual or a professional mechanic for diagnosis. You can attempt to clear the codes using the HUD's functions, but persistent codes indicate an underlying issue.

For more detailed troubleshooting or advanced settings, please refer to the comprehensive user manual PDF available at: P16 HUD User Manual (PDF).

7. Specifications

Feature Specification
Model P16
Brand CNSPEED
SKU YC103081
Display Type TFT LCD Multi-Color Screen
Connection Interface OBD2 (Type-C cable)
Dimensions (L x W x H) 115mm (4.53in) x 72mm (2.83in) x 28mm (1.10in)
Product Weight 0.43 kg
Package Dimensions (L x W x H) 16cm x 13cm x 5cm
Origin Mainland China

8. User Tips

  • Optimal Visibility: Utilize the included reflective film on your windshield for the clearest projection, especially in bright conditions. The integrated light-shading design helps reduce glare at night.
  • Customizable Display: Experiment with the different display modes to find the layout that best suits your driving preferences and provides the most relevant information at a glance.
  • Safety Alarms: Pay attention to the various alarms (overspeed, water temperature, voltage, RPM, fatigue driving). These are crucial for maintaining vehicle health and driving safety.
  • Fault Code Management: The HUD's ability to read and clear fault codes can be a handy diagnostic tool. However, always investigate the root cause of persistent fault codes with a qualified mechanic.
  • Professional Installation: While installation is generally straightforward, if you are uncomfortable with connecting automotive electronics, consider professional installation to avoid potential damage.
  • Product Variations: Be aware that the color of actual items may slightly differ from listing images due to computer screen variations. Always check detailed size and style information before purchasing.

9. Warranty and Support

For specific warranty information, please refer to the terms and conditions provided by your retailer or contact CNSPEED customer support directly. Keep your purchase receipt as proof of purchase.

For further technical assistance or detailed operational instructions, you may consult the comprehensive user manual PDF: P16 HUD User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.