TEENRAM 9006 HB4

Contents

TEENRAM 9006 HB4 Car LED Headlight Bulbs User Manual

High Performance LED Lighting for Automotive Use

1. Product Overview

The TEENRAM 9006 HB4 Car LED Headlight Bulbs are designed to provide superior illumination for your vehicle. Featuring high-brightness 3570 CSP chips, an efficient cooling system, and a plug-and-play design, these bulbs offer a significant upgrade over traditional halogen lamps.

Two TEENRAM 9006 HB4 LED headlight bulbs in front of a car with illuminated headlights.
TEENRAM 9006 HB4 LED Headlight Bulbs

2. Specifications

Feature Specification
Model 9006 HB4
Voltage 9-32V (compatible with 12V/24V systems)
Wattage 300W/SET
Lumens 30000LM/SET
Color Temperature 6500K White
Lifespan >50000 hours
Waterproof Rating IP68
Cooling System Full aviation aluminum alloy body, 16,000 RPM ultra-speed cooling fan, Sandwich Copper Substrate
Working Temperature -40°C to +135°C
Light Source 3570 CSP Chips (3rd Generation)
Installation Type Plug and Play
Internal Drive Yes
Certification CE
Origin Mainland China
Package Dimensions (L x W x H) 17cm x 11cm x 5cm
Package Weight 0.117 kg
Diagram showing the dimensions of the 9006 HB4 LED headlight bulb, with measurements in centimeters and inches.
Product Dimensions (9006 HB4)

3. Setup and Installation

These LED headlight bulbs are designed for a straightforward 'plug and play' installation, mimicking the original car halogen lamp design for an exact luminous and focus point. No modification to the circuit or destruction of the original dust cover is typically required.

3.1 Installation Steps

  1. Ensure your vehicle's engine is off and the lights are switched off.
  2. Locate your vehicle's headlight assembly and remove the existing halogen bulb.
  3. Insert the TEENRAM LED bulb into the headlight housing.
  4. Adjust the bulb for optimal beam pattern. The LED chips should face the 12 o'clock (directly upward) and 0 o'clock (directly downward) directions.
  5. Important Notice: The wire end of the bulb should face downward during installation.
  6. Connect the bulb's connector to the vehicle's wiring harness.
  7. Test the lights to ensure proper function and beam alignment.
Diagram illustrating the 360 degree adjustable beam feature, showing correct and incorrect orientations of the LED chips and the wire end during installation.
360° Adjustable Beam for Optimal Light Pattern

4. Operating Instructions

Once installed correctly, your TEENRAM LED headlight bulbs will provide a powerful and clear light output. The advanced design ensures a perfect beam pattern, enhancing visibility without blinding oncoming traffic.

4.1 Beam Pattern

The bulbs are engineered to produce a precise beam pattern, crucial for safe driving. The low beam provides a clear cut-off line (Left Low Right High Tangent Leveling) that illuminates the road ahead without causing glare to other drivers. The high beam offers a central light source concentration for maximum distance visibility.

Diagram showing the perfect beam pattern of the LED headlights, with examples of low beam (not affecting traffic safety) and high beam (good paving effect).
Perfect Beam Pattern for Enhanced Safety

5. Maintenance

The TEENRAM LED headlight bulbs are designed for durability and long-term performance with minimal maintenance.

5.1 General Care

  • Keep the headlight lenses clean for optimal light output.
  • Avoid touching the LED chips directly during installation or handling.
  • The bulbs are IP68 waterproof, ensuring perfect performance in various weather conditions (rainy, snowy, foggy, dusty).
Image depicting the IP68 waterproof rating of the LED bulb, showing its performance in rainy, snowy, foggy, and dusty conditions.
IP68 Waterproof for All-Weather Performance

5.2 Cooling System

The bulbs feature an intelligent temperature control system with a full aviation aluminum alloy body, a 16,000 RPM ultra-speed cooling fan, and a sandwich copper substrate for fast heat conduction. This advanced heat dissipation system ensures a long lifespan of over 50,000 hours.

Exploded view diagram of the LED bulb showing its components: full aviation aluminum alloy body, 16,000 RPM ultra speed cooling fan, 3570 CSP 3rd generation chip, and sandwich copper substrate for heat dissipation.
Efficient Heat Transfer System for Extended Lifespan

6. Troubleshooting

6.1 Common Issues and Solutions

  • Flickering, Interference, or Error Lights: If you experience flickering, radio interference, or dashboard error lights, your car may require additional resistor cancelers/decoders. While the bulbs feature an intelligent CANBUS system designed to minimize such issues, some vehicle models might still need these accessories.
  • Harmful Interference (FCC Compliance): This equipment generates and uses radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, try the following:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
  • Bulb Not Lighting Up: Check the connection to the wiring harness. Ensure the bulb is correctly seated in the housing. Verify the vehicle's fuse for the headlight circuit.

7. User Tips

  • Verify Compatibility: Always compare the bulb size and socket type (9006 HB4) with your vehicle's original bulbs before purchase and installation.
  • Local Regulations: Be aware of and check local LED lighting regulations in your region, as requirements can vary.
  • Professional Installation: If you are unsure about the installation process, consider seeking professional assistance to ensure correct alignment and function.

8. Warranty and Support

TEENRAM provides a limited warranty for these LED headlight bulbs. For specific warranty terms and conditions, please refer to the official product documentation or contact customer support.

For a detailed user manual and additional documents, you may refer to the PDF available at: TEENRAM 9006 HB4 LED Headlight User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.