1. Introduction
The ARROWMAX Mini Bench Drill Electric Cordless Desktop Drill is a versatile tool designed for precision drilling in small-scale projects. Equipped with a 32-bit microprocessor and an OLED high-definition digital display, it offers ease of use and accuracy. This manual provides essential information for safe and effective operation.
2. Safety Information
- Keep away from children.
- Do not use when charging the battery.
- Read the user manual before use.
- Maximum torque of manual operation: 3 N.m.
- Always wear appropriate personal protective equipment, such as safety glasses, when operating the drill.
- Ensure the workpiece is securely clamped before drilling.
- Avoid drilling on very hard materials that exceed the drill's capabilities.
3. Product Components
The ARROWMAX Mini Bench Drill kit typically includes the following items:
- 1x Electric Drill (Drill Pen)
- 1x Aluminum Alloy Storage Box
- 1x Magnetic Stand For SDS (Benchtop Drill Press)
- 1x HSS Drill Bit Set A (10 pcs)
- 1x Type-C USB Cable
- 1x User Manual (PDF)
4. Setup Instructions
4.1. Drill Bit Installation
- Loosen the chuck of the electric drill pen.
- Insert the desired drill bit into the chuck.
- Tighten the chuck securely to hold the drill bit in place.
4.2. Benchtop Drill Press Assembly
To install the benchtop drill press, follow these steps:
- Attach the drill pen to the drill press holder.
- Tighten the screw to secure the drill pen.
- Tighten the handle for vertical adjustment.
- Secure the base by tightening the two screws at the bottom.
5. Operating Instructions
5.1. Power On/Off and Rotation
- To Start: Long press the Power Button. The drill will default to 1st gear forward rotation.
- To Reverse: Single press the Power Button after startup to switch to reverse rotation.
- To Stop: Long press the Power Button again to turn off the electric drill.
5.2. Gear Adjustment
- Simply press the Gear Adjustment Button (single press) to cycle through the available working gears.
- The drill will remember the last used gear setting when restarted.
5.3. Working Interface and Status Display
The OLED screen displays animated visuals of the drill's current working status, battery level, and charging status. The four LED lights on the head automatically illuminate during operation.
- Battery Status: Indicated by an icon (e.g., 100% Battery).
- Gear Setting: Displays the current RPM (1: 500RPM, 2: 600RPM, 3: 700RPM, 4: 800RPM, 5: 900RPM).
- Charging Interface: Dynamic display of icons when charging. The screen turns off after full charge.
5.4. Drilling Materials
The ARROWMAX Mini Bench Drill is suitable for drilling various materials, including but not limited to:
- Plastic
- Shell
- PCB (Printed Circuit Board)
- Wood
- Resin
- Keychain materials
- DIY Craft materials
- Polymer Clay
Attention: Under drilling work, only right turn (forward direction) is preferred to drill different materials.
5.5. Product Demonstration Video
Watch this video for a visual guide on how to use the ARROWMAX Mini Bench Drill and its benchtop press attachment for various tasks.
6. Maintenance
6.1. Storage Instructions
- To open the storage box: Press the top of the storage box; the inner box will pop out.
- To close the storage box: Press the top of the inner box once more.
- The electric drill is fixed to the inner box of the storage box in the form of a buckle.
- After use, place the electric drill back into its designated position in the inner box.
- Ensure drill bits are fixed in the inner box after use.
6.2. General Care
- Keep the tool clean and free from dust and debris.
- Store in a dry place away from direct sunlight and extreme temperatures.
- Regularly check the chuck for wear and tear and ensure it tightens securely.
7. Troubleshooting
This section provides general troubleshooting tips. For specific issues not covered here, please refer to the official support channels.
- Drill not turning on: Ensure the battery is charged. Long press the power button to activate.
- Drill bit slipping: Ensure the chuck is tightened securely around the drill bit. Check if the drill bit is compatible with the chuck size.
- Reduced performance: Charge the battery fully. Ensure the correct gear speed is selected for the material.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ARROWMAX |
| Product Model | AM-230875 / AM-230876 |
| Drill Type | Mini Drill |
| Power Source | Battery (LiPo, 500 mAh) |
| Battery Included | Yes |
| Battery Voltage | 5 V |
| Max. Drilling Diameter | 2.2mm |
| No-load Speed | 900 RPM (5 adjustable speeds: 500-900 RPM) |
| Electric Max. Torque | 2.3 kgf.cm |
| Charging Time | 80 minutes |
| Continuous Use Time | Up to 3 hours |
| Standby Time | Up to 90 days |
| Drill Pen Dimensions | 15 x 15 x 137 mm (0.59 x 0.59 x 5.31 inches) |
| Drill Pen Weight | 55 g |
| Benchtop Press Dimensions | Base: 10cm x 7cm (3.93in x 2.75in), Height: 14.5cm (5.71in) |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
| Use | Home DIY |
9. User Tips
- Always ensure the drill bit is sharp for optimal drilling performance and to prevent damage to the material.
- When using the benchtop press, ensure the base is stable and secured to prevent movement during drilling.
- For delicate materials, start with a lower speed setting and gradually increase as needed.
- Keep the drill pen and bits clean after each use to prolong their lifespan.
10. Warranty and Support
For detailed warranty information, please refer to the official product documentation or contact ARROWMAX customer support. The full user manual is available in PDF format for download:
For further assistance or inquiries, please contact the ARROWMAX Official Store directly.