ZTree PIR Motion Sensor light

Contents

LED Under Cabinet Light with Motion Sensor

Model: PIR Motion Sensor Light | Brand: ZTree

1. Introduction

This human body induction lamp integrates human infrared sensing control, making it ideal for narrow space installations. It automatically lights up when detecting human activity in dim environments and delays extinguishing when no one is present. This design combines energy saving with convenience, suitable for various scenarios such as desks, wardrobes, shoe cabinets, corridors, bathrooms, and headboards.

Key features include an ultra-thin design, soft light eye protection, a sensing distance of 3-5 meters, a wide sensing angle of 120°, low power consumption, and long battery life. It supports drill-free installation using magnetic suction or adhesive backing, making it detachable and portable.

2. Safety Information

▲ WARNING: Please be aware of potential fire risks and strictly follow this instruction manual for charging and storage. For disposal, consult your local authority's website for information on safely disposing of the lithium-ion battery in accordance with applicable legal requirements.

Symbol Explanation

Symbol Description
CE CE certification signifies that the product meets the safety requirements stipulated by EU directives, allowing it to be sold in the European Union and European Free Trade Area countries.
UKCA UK Conformity Assessment mark, introduced after Brexit to replace the EU's CE mark, applicable to most goods placed on the market in the UK (England, Wales, and Scotland).

3. Package Contents

Please check the package for the following items:

  • LED Under Cabinet Light (1 unit)
  • USB Charging Cable (1 unit)
  • Magnetic Suction Base with Adhesive Backing (quantity may vary based on light length)

4. Specifications

Feature Detail
Light Source TypeLED Lights
Power ModeUSB Charging
Operating Voltage3V
Battery TypeRechargeable Lithium-Polymer Battery
Bulbs IncludedYes
Luminous Flux249-2000 Lumens
Installation MethodSelf-contained (Magnetic suction/Adhesive backing)
MaterialABS
DimmableYes
Power GenerationMotion Sensor (PIR)
Brand NameZTree
OriginMainland China
CertificationUL, CE
Dimensions (Width x Height)21mm x 12mm
Available Lengths10cm, 20cm, 30cm, 50cm

5. Setup & Installation

5.1. Installation Preparation

  1. Choose Installation Location: Select an area requiring temporary lighting (e.g., under a desk, inside a wardrobe, corridor wall, next to a bathroom mirror). Position the light 0.5-1.2 meters away from the ground/use plane. Ensure the sensing window is unobstructed by clothing or debris.
  2. Clean the Installation Surface: Wipe the installation area with a dry cloth to ensure the surface is dry, flat, and free of dust and oil stains. This improves the adhesive or magnetic stability of the backing.

5.2. Installation Method (Magnetic/Adhesive)

The light offers flexible installation options:

  1. Magnetic Installation (Direct): If the installation surface is made of ferromagnetic material (e.g., refrigerator, metal wardrobe, iron desk), the lamp body can be directly attached to the surface. Adjust the angle to ensure the sensing window faces the active area.
  2. Magnetic Installation (with Base): If the surface is non-magnetic, first stick the provided magnetic suction base to the desired installation position using its adhesive. Then, attach the lamp body to the base and press firmly for 30 seconds to secure it.
  3. Adhesive Installation: Peel off the protective film from the adhesive on the back of the lamp body. Align it with the installation position, press for 1 minute to ensure a firm fit, and allow it to sit for 1 hour before use to prevent detachment.
Installation Instructions for LED Under Cabinet Light
Step-by-step guide for installing the light using magnetic and adhesive methods.

6. Operation

6.1. Charging

  1. Connect the night light to a 5V USB port (e.g., phone charger, computer USB port, or power bank) using the included USB charging cable.
  2. The red indicator light will illuminate during charging. It will turn green (or turn off) once fully charged. Charging typically takes 2-4 hours.
  3. After fully charging, unplug the charging cable and press the power button (ON/OFF) on the side of the lamp body to put the night light into standby mode.

6.2. Switching Modes

The light features multiple operating modes, controlled by the switch button:

  1. Press the switch once: The light will turn on in "constant on" mode.
  2. Press the switch again: The light will flash twice to activate the "night sensing mode".
  3. Press the switch a third time: The light will flash four times to activate the "Day Night Sensing Mode".
  4. Press the switch for the fourth time: To turn it off.
  5. Long press the button: To adjust brightness (dimmable feature).
Diagram showing Type-C Socket, Signal Indicator Light, Switching Mode, and Sensing Area
Overview of the light's components and switching mode instructions.

7. Maintenance

  • Charging Precautions: Only use 5V USB chargers. Avoid using non-5V chargers to prevent battery damage. Do not squeeze or cover the lamp body during charging to avoid overheating.
  • Long-Term Storage: If the charging model is idle for an extended period, it is recommended to charge it every 3 months to prevent damage to the lithium battery due to depletion.
  • Environmental Conditions: Avoid installing the light in damp environments (e.g., shower areas in bathrooms or directly above kitchen sinks) to prevent short circuits and electrical leakage. For bathrooms, install in a dry area (e.g., near a mirror or door).
  • Heat Management: Slight heating during lamp operation is normal. Do not touch the surface of the lamp beads to avoid burns. Keep the light away from flammable materials (paper, curtains) and ensure proper ventilation and heat dissipation.
  • Child Safety: Children's use or installation requires adult supervision to prevent accidental ingestion of batteries, disassembly of the lamp body causing electric shock, or ingestion of small parts.
  • Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or immerse the light in water.

8. Troubleshooting

Problem Possible Cause Solution
Light does not turn on Battery is depleted; Incorrect mode selected; Sensor obstructed. Charge the light; Cycle through modes to select "constant on" or a sensing mode; Ensure sensor is clear.
Motion sensor not working Incorrect mode selected; Sensor obstructed; Environment too bright for night sensing mode. Ensure "night sensing mode" or "Day Night Sensing Mode" is active; Clear any obstructions from the sensor; Test in a darker environment.
Light flickers or dims unexpectedly Low battery; Faulty charging cable/port. Recharge the light fully; Try a different USB charging cable and port.
Light detaches from surface Improper installation; Surface not clean/dry; Insufficient curing time for adhesive. Re-install following instructions carefully, ensuring surface is clean and dry, and allowing adhesive to cure for 1 hour.

9. User Tips

No specific user tips were found in the provided reviews or Q&A. However, users often find these lights most effective in dark environments where the motion sensor can operate optimally. The magnetic installation allows for easy removal for recharging or repositioning, which is a convenient feature for many applications.

10. Warranty & Support

For detailed warranty information, customer support, or further technical assistance, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for your reference:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.