1. Product Overview
The EasySMX X05Pro is a multi-mode gaming controller supporting 2.4GHz, Bluetooth, and wired connections. It is compatible with PC, Switch, Android, and iOS devices (iOS 13.0 or later, MFI-certified games).
The X05 Pro features several upgrades over the classic X05 model, including enhanced noise-canceling buttons, 2-stage Hall Effect triggers, 2 programmable buttons, a rebuilt 8-way D-pad, a larger 1000mAh battery, 1000Hz polling rate in 2.4GHz wireless & wired modes, enhanced soft silicone coating for improved comfort, and 2 grip motors + 2 trigger rumble motors for immersive realism. It is designed from gamer feedback, tuned for silence and precision.

2. Button Layout











3. Connection Instructions
3.1 Connecting to PC
2.4GHz Receiver Connection:
- Insert the receiver into a USB port on your PC.
- Slide the 'Mode Toggle' to the 2.4 GHz Mode.
- Press the Home button to power on.
- The controller's LED will flash (indicating pairing).
When the LED becomes steady with a short vibration, pairing is confirmed.
Forced Pairing (if auto-reconnection fails):
- Insert the wireless receiver into a USB port on your PC, press and hold the receiver's button for 1 second until its LED flashes rapidly.
- With the controller powered off, press and hold the Home button for 5 seconds to power on.
- The LED will flash rapidly, then become steady with a short vibration to confirm pairing.
Wired Connection:
- Slide the Mode Toggle to the 2.4 GHz mode.
- Connect the controller to the PC using a USB cable.
3.2 Connecting to a Mobile Phone
First-Time Connection:
- Slide the Mode Toggle to the BT (Bluetooth) mode.
- Press and hold the Home button for 5 seconds to power on.
- The controller's LED will flash (indicating pairing).
- Enable Bluetooth on your phone, then search for "Xbox Wireless Controller" and select it to pair.
When the LED becomes steady with a short vibration, pairing is confirmed.
Reconnection:
Keep the Mode Toggle under BT Bluetooth mode, and short-press the Home button to reconnect your phone.
3.3 Connecting to a Nintendo Switch
First-Time Connection:
- Slide the Mode Toggle to the NS (Switch) mode.
- Press and hold the Home button for 5 seconds to power on.
- The controller's LED will flash (indicating pairing).
- On the Switch, navigate to Controllers > Change Grip/Order to enter pairing mode.
When the LED becomes steady with a short vibration, pairing is confirmed.
Reconnection:
Keep the Mode Toggle under NS (Switch) mode, and short-press the Home button to reconnect your Switch.
Note: In Switch mode, double-click the "O" button to take screenshots and press the Home button to wake the console.
4. Controller Mode Switching
While in 2.4GHz connection mode, you can switch between controller modes:
- Long-press BACK & START Button for 3 seconds to cycle through:
- X-input mode (white LED)
- D-input mode (yellow LED)
A short vibration confirms a successful mode switch.
5. Operating Instructions
5.1 Turbo Settings
- Manual Turbo: Press M & A to activate continuous firing while holding the "A" button.
- Cancel Turbo: Press M & A a second time to disable continuous firing.
Note:
- Press M & turn Left Stick left to decrease Turbo speed.
- Press M & turn Left Stick right to increase Turbo speed.
- Only A, B, X, Y, LB, RB, LT, and RT can be set to turbo.
5.2 Programming M1 & M2 Button Settings
To Program a button:
- While connected, press and hold M & M1/M2. The RGB LED will slowly flash red, indicating programming mode.
- Press the buttons you want to program (e.g., A or A & B) to assign a new function.
- Press M1/M2 to save and exit programming mode.
To Cancel a Programming Function:
Press and hold M & M1/M2 until the RGB LED slowly flashes red, then press M1/M2 to clear the button's function.
5.3 RGB Lighting Adjustment
Cycle Lighting Modes:
- Press M button twice to cycle through; a short vibration confirms a successful RGB.
- Then turn the Left Trigger right to switch between different RGB modes:
- Mode 1: Dynamic (colorful)
- Mode 2: Breathing effect (Turn the Left Stick left or right to cycle colors)
- Mode 3: Solid color (Turn the Left Stick left or right to cycle colors)
- Mode 4: Gradient effect
- Mode 5: Off
Adjust Brightness:
Press Left Stick down to adjust brightness (Level 1 to 4).
5.4 Vibration Adjustment
- Increase vibration intensity: Press M & turn Left Stick up.
- Decrease vibration intensity: Press M & turn Left Stick down.
Note: Available settings: Level 0 to 4 vibration intensity.
5.5 Joysticks Mode Switching
Dead Zone Adjustment:
- While connected, press and hold Right Stick & O button for 2 seconds to switch between "zero dead zone" and "with dead zone" modes.
- The default setting is "with dead zone."
Mode Switching (Axis Boundary):
- While connected, press and hold Left Stick & O button for 2 seconds to switch the axis boundary between "circle" and "square" modes.
- The default axis boundary is "circle."
5.6 Trigger Vibration Adjustment
Press Vibration Mode:
- Hold Left Trigger & O for 2 seconds (controller connected).
- Left/right trigger vibrates when pressed.
- Hold Left Trigger & O 2 seconds again to turn off.
Default is Native Vibration.
Linked Vibration Mode:
- Hold Right Trigger & O for 2 seconds (controller connected).
- Trigger vibration syncs with grip motor.
- Hold Right Trigger & O 2 seconds again to turn off.
Default is Native Vibration.
6. Joysticks and Triggers Calibration
Calibration Process:
- Keep the controller connected, press BACK & B & Home to enter calibration mode.
- The Indicator LEDs will flash alternately as red.
- Rotate both left and right sticks clockwise for 3 full rotations and fully press both left and right triggers three times at a consistent speed.
- Place the controller on a flat surface for at least 3 seconds and press the "B" button.
- Calibration completes as the controller automatically enters motion sensor calibration (indicated by flashing blue LED), then the controller will power off automatically.
7. Charging and Power
Charging Indicators:
- Off State: When charging, the Indicator LED flashes red. The LED turns green once fully charged.
- Connected State: The LED indicates the current mode (X-input mode / D-input mode / Switch Mode).
Power Off:
Press and hold the Home button for 5 seconds to power off, or the controller will automatically shut down after 10 minutes of inactivity.
Low Battery Warning:
When connected, if both Indicator LED flashes red rapidly, it indicates low battery. Please recharge promptly.
8. Product Specifications
| Feature | Specification |
|---|---|
| Model | X05 Pro |
| Operating Current | <45mA |
| Battery Capacity | 1000mAh |
| Sleep Current | <20µA |
| Input Voltage | 5V |
| Charging Time | Approximately 3 hours |
| ABXY Switch Type | MEMBRANE |
| Bumpers Switch Type | Tactile switch |
| Hall Effect | Yes |
| Trigger Button Type | Hall-Linear |
| Compatible Platform | Nintendo Switch, PC, iOS, Steam, Raspberry Pi |
| Interface Type | USB, Bluetooth, Type C |
| PC System | Windows 11 |
| Type | Gamepads |
| Certification | CE |
9. Package Contents
- 1 x X05 Pro Controller
- 1 x USB Dongle Receiver
- 1 x Type-C Data Cable
- 1 x User Manual (PDF available at https://manuals.plus/m/aa5984e6d6857714a30459637a6939ac72340824cdbe5bd50f7f1035649097f2)

10. User Tips
- This controller is noted for its quiet button presses, making it suitable for late-night gaming sessions without disturbing others.
- The build quality is generally well-regarded by users.
11. Troubleshooting
- Controller not connecting: Ensure the Mode Toggle is set correctly for your device (2.4GHz for PC dongle, BT for mobile, NS for Switch). Try forced pairing if auto-reconnection fails.
- Low battery: If indicator LEDs flash rapidly red, recharge the controller promptly using the provided Type-C cable.
- Buttons unresponsive or drifting: Perform the Joysticks and Triggers Calibration process as described in Section 6.
- Unwanted continuous firing: If Turbo mode is active unintentionally, press M & A a second time to disable it.
- Vibration issues: Check vibration intensity settings (Section 5.4) and trigger vibration modes (Section 5.6).
12. Safety Information
Before operating the device, please read and adhere to the following safety precautions to ensure optimal performance and avoid hazards:
12.1 Operating Temperature:
Use the device between 0°C to 35°C. Store the device and accessories between -10°C and 40°C. Extreme temperatures may cause malfunctions.
12.2 Small Parts Warning:
Keep the device and its accessories out of reach of children to prevent accidental damage or choking hazards.
12.3 Water and Moisture:
Do not expose the device or accessories to rain or moisture to avoid the risk of fire or electric shock.
12.4 Heat and Sunlight:
Keep the device and battery away from fire, high temperatures, and direct sunlight.
12.5 Battery Safety:
- Do not throw batteries into fire.
- Do not dismantle, crush, or modify the battery.
- Do not immerse batteries in water or other liquids.
- Avoid external impact or pressure on the battery to prevent leakage, overheating, fire, or explosion.
12.6 Battery Replacement:
Do not attempt to replace the battery yourself, as improper handling may lead to overheating or fire.
12.7 Tampering:
Do not disassemble or modify the device or its accessories, including the built-in battery, as this will void the warranty.
12.8 Disposal:
Dispose of the device, battery, and accessories in accordance with local regulations. Improper disposal may result in battery explosion.