Snowflake Solar LED Fairy Lights

1. Introduction

Thank you for choosing the RMNRTN Snowflake Solar LED Fairy Lights. This product is designed to provide beautiful, energy-efficient outdoor lighting for various occasions such as Christmas, weddings, parties, or general garden and tree decoration. Powered by solar energy, these lights are easy to install and operate, automatically illuminating at dusk and turning off at dawn.

2. Safety Information

• Keep the product away from open flames and high temperatures.
• Do not immerse the solar panel or light string in water for extended periods. The product is designed to be weather-resistant, not submersible.
• Keep out of reach of small children to prevent entanglement or ingestion of small parts.
• Do not attempt to disassemble or modify the product, as this may void the warranty and cause damage.
• Ensure the solar panel is placed in a location that receives maximum direct sunlight.

3. Package Contents

Please check the package to ensure all items are present:

• 1 x Snowflake LED String Lights
• 1 x Solar Panel with Ground Stake

4. Setup and Installation

4.1 Initial Assembly

1. Assemble the Spike: Connect the two parts of the ground stake together.
2. Assemble the Stake: Attach the assembled ground stake to the back of the solar panel unit.
3. Remove the Protected Film: Carefully peel off the protective film from the solar panel surface.

4.2 Placement and Initial Charging

• Location: Choose an outdoor location where the solar panel can receive at least 8-12 hours of direct sunlight per day. Avoid placing the panel in shaded areas, under trees, or near other light sources (like streetlights) that might interfere with the automatic dusk-to-dawn sensor.
• Solar Panel Angle: The solar panel can be rotated up to 90 degrees. Adjust its angle to face the sun directly for maximum charging efficiency.
• First Use: Before the first use, ensure the solar panel is exposed to direct sunlight for at least 12 hours (daytime) with the power switch ON. This allows the internal battery to store enough power for optimal performance.
• Light String Placement: Drape the snowflake LED string lights as desired on trees, bushes, fences, or other outdoor structures.

5. Operating Instructions

5.1 Power On/Off

• Locate the ON/OFF switch on the back of the solar panel unit.
• Press the switch to the 'ON' position to activate the lights. The lights will automatically charge during the day and illuminate at night.
• Press the switch to the 'OFF' position to turn off the lights and stop charging.

5.2 Lighting Modes

The solar panel unit features a 'MODE' button to cycle through different lighting effects. Press the 'MODE' button repeatedly to select your desired lighting pattern.

The 8 available lighting modes are:

1. Combination
2. In Waves
3. Sequential
4. Flicker
5. Show Flash
6. Fast Flash
7. Dream Change
8. Bright and Extinguished (Slow Fade)

5.3 Automatic Operation

Once switched ON, the lights will automatically charge during daylight hours. When ambient light levels drop (dusk), the lights will automatically turn on. They will remain lit for approximately 6-10 hours on a full charge, then turn off automatically at dawn or when the battery is depleted.

6. Maintenance

• Cleaning the Solar Panel: Regularly wipe the solar panel surface with a soft, damp cloth to remove dust, dirt, snow, or debris. A clean panel ensures optimal sunlight absorption and charging efficiency.
• Optimal Sunlight: Periodically check that the solar panel's location still receives maximum direct sunlight throughout the day, especially after seasonal changes or new plant growth.
• Storage: If storing the lights for an extended period, ensure the battery is fully charged before storage. Store in a cool, dry place.

7. Troubleshooting

• Lights do not turn on at night:
  • Ensure the ON/OFF switch is in the 'ON' position.
  • Verify the solar panel is receiving sufficient direct sunlight (8-12 hours daily).
  • Check if the solar panel is clean and free from obstructions.
  • Ensure there are no other strong light sources nearby that might trigger the light sensor to keep the lights off.
• Lights are dim or only stay on for a short time:
  • The battery may not be fully charged. Ensure the solar panel gets maximum direct sunlight for a full day.
  • Clean the solar panel surface.
  • Weather conditions (cloudy days) can affect charging efficiency.

8. Specifications

9. User Tips

• For best performance, ensure the solar panel is always clean and free from obstructions.
• If the lights are not as bright as expected, try repositioning the solar panel to receive more direct sunlight.
• During winter months or prolonged cloudy periods, charging efficiency may decrease, resulting in shorter illumination times.
• Test different lighting modes to find the one that best suits your ambiance.

10. Warranty and Support

This product is manufactured with quality and care. If you encounter any issues or have questions regarding your RMNRTN Snowflake Solar LED Fairy Lights, please contact the seller or retailer from whom you purchased the product for assistance. Please have your order details ready when contacting support.