Fuers G03

Contents

FUERS G03 WIFI GSM Alarm System User Manual

Model: G03 | Brand: FUERS

1. Introduction

This smart alarm system provides comprehensive home security. All sensors are wirelessly connected to the main panel, which continuously monitors your home. If any sensor detects an issue while the system is armed, the panel will sound an alarm, send text notifications, and make alarm calls to all registered contacts. The system supports both Wi-Fi and GSM cellular networks for reliable communication.

2. What's in the Box

  • Alarm Panel x1
  • Remote Tag x2
  • RFID Tag x2
  • Door/Window Sensor x1
  • Motion Sensor x1
  • USB Cable x1
  • User Guide x1
  • Screw and Anchor x2

Optional Accessories:

  • Power Adapter
  • Siren
  • Wireless Keypad
  • Doorbell Button
FUERS G03 Alarm System components including main panel, door/window sensors, motion sensors, remote tags, and siren.

Image: Overview of the FUERS G03 Alarm System components.

3. Specifications

Alarm Panel

AttributeValue
Model NumberG03
Power Supply110/220VAC to Type-C 5V, 1000mA
Backup Battery3.7V, 500mAh Lithium Battery
Consumption<150mA@normal
Siren Output<500mA@high volume mode, <50mA@low volume mode
Radio Frequency433Mhz
RFID Reader125KHz/EM4100 Family (reading distance 1~2cm)
4G (for 4G model)Cat-1 (LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 for SA version; LTE-FDD B1/B3/B5/B7/B8/B20 for E version; LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/38/39/40/41 for C version)
Wi-FiIEEE802.11b/g/n (only 2.4GHz Wi-Fi network can be connected)
ConnectivityWireless siren, up to 40 remote tags, up to 40 RFID tags and up to 100 sensors
Operation Temperature-10~55℃
DisplayYes
Password KeyboardYes
Alarm TypeSMS, The Alarm, Apps Control, PSTN
Smart Home PlatformTuya
CertificationCE

Door/Window Sensor

AttributeValue
Power SupplyDC 3V (CR2032 Lithium Battery x1)
Consumption<8uA@Standby, <15mA@Activated
Transmitting Power<=10dBm
Radio Frequency433Mhz
Operation Temperature-10~55℃

PIR Motion Sensor

AttributeValue
Power Supply1.5V AA Battery x3
Consumption<15uA@Standby, <25mA@Activated
Motion Distance<12meters
Motion Range110°
Transmitting Distance<=10dBm
Radio Frequency433Mhz
Operation Temperature-10~55℃

Remote

AttributeValue
Power SupplyDC 3V (CR2025 Lithium Battery x1)
Consumption<5uA@Standby, <15mA@Activated
Transmitting Distance<=10dBm
Radio Frequency433Mhz
Operation Temperature-10~55℃

4. At a Glance (Panel Overview)

Front view of the FUERS G03 Alarm Panel with keypad and display.

Image: Front view of the Alarm Panel.

  1. Display window: Shows weather, system status, time, alarm information, menus, and more.
  2. Keypad: ARM, HOME ARM, DISARM, SOS buttons. Used for entering passcodes, settings, and more.
  3. Speaker: For voice prompts and alarms.
  4. RFID tag reader zone: Tap an RFID tag here to arm or disarm.
  5. Wall Bracket: For installation.
  6. Tamper switch: A lever underneath the bracket that triggers an alarm notification if the panel is removed from its installed location.
  7. Backup battery ON/OFF: Push to ON to activate the built-in backup battery.
  8. Power port (Type-C): Plug in the power cable here (do this after turning the battery switch on).
  9. 4FF (Nano) SIM card slot: Install the SIM card here.
  10. Siren port: Plug in the siren cable here.
Dimensions of the FUERS G03 Alarm Panel: 180mm/7.09 inches wide, 120mm/4.72 inches high, 14mm/0.55 inches thick.

Image: Alarm Panel dimensions and key features.

Back view of the FUERS G03 Alarm Panel showing desktop stand, power switch, security slot, SIM card slot, Type-C power port, and wall-mount bracket.

Image: Back of the Alarm Panel with labeled ports and features.

5. Home Screen & Status Icons

Weather Display

The home screen displays your local current temperature and hourly forecasts. This feature requires the panel to be connected to the internet and for local Location Service to be available. Note: Weather information may not be unavailable in some areas.

Top Status Bar Icons

IconWhat it means
No SIM card inserted or SIM card faulty
Cellular network barsShows your carrier's cellular network availability. More bars indicate stronger signal. Gray bars mean not registered.
Wi-Fi network iconShows the system is connected to a Wi-Fi source (white icon).
Wi-Fi Internet connection with dotShows the hub has a Wi-Fi Internet connection when dot is shown and APP is available.
SMS iconText message sending
Call iconCalling
Lock iconThe keypad is locked
AC Power iconPowered by AC power
Battery icon (charging)Charged fully, progress bars show charging status.
Battery icon (low)Shows battery level when AC power is lost. Red icon indicates low backup battery power.
Battery failure iconBattery failure or battery switch is off.

Status Icon and Tips

TipIconWhat it means
System ArmedArmed
System Stay ArmedHome armed
System DisarmedDisarmed
Door/Window OpenThe door/window is open
Please exitCountdownDuring Exit Delay: You have XX seconds to leave home before the Exit Delay expires. When Exit Delay is completed, the alarm system is armed.
Please disarmCountdownDuring Entry Delay: You must disarm the system before Entry Delay expires, or an alarm will go off.
Somebody VisitThe doorbell button is pushed

6. Setup

6.1 Where to Place Your Devices

Alarm Panel Placement

  • Place the panel close to where you frequently enter and exit for easy access.
  • Ensure the panel is in a spot with good Wi-Fi and cellular signal for reliable notifications and text messages.
  • Use an unswitched wall outlet to prevent accidental power loss.
  • Avoid mounting the panel on metal surfaces, as this can block RF signals.
Alarm panel shown in desktop placement and wall-mounted configurations.

Image: Desktop placement or wall mounting options for the alarm panel.

Door/Window Sensor Placement

Attach the bracket and magnet to a flat surface using the included mounting strips. The sensor then clips onto the bracket. Ensure the magnet is aligned with the middle of the sensor and placed within 0.6 inches (1.5cm) when the door or window is closed.

Diagram showing the 433mhz Door/Window Sensor and its specifications.

Image: 433mhz Door/Window Sensor and its specifications.

PIR Motion Sensor Placement

Mount the PIR Motion Sensor 79 to 87 inches (2 to 2.2m) above the floor. Specify the right direction for the detection range. Test the motion detector in testing mode.

Diagram showing the PIR Motion Sensor and its specifications.

Image: PIR Motion Sensor and its specifications.

Special Considerations for PIR Motion Sensor:
  • Do not install outdoors, in a garage, or on glass.
  • Cannot detect motion through glass.
  • Avoid places where it could get wet (e.g., near swing-out windows).
  • Do not install within 3 feet (1 meter) of heat sources (electric heaters, heat vents, fireplaces) or sources of turbulent air.
  • Do not install behind large appliances or furniture that might obstruct its motion sensors.

6.2 Install the SIM Card

A nano SIM card is required for cellular services (text messages and alarm calls). Install the SIM card into the receptacle before getting started.

  1. Press and slide the cover in the direction of the arrow and lift it up.
  2. Install your SIM card into the slot.
  3. Put down and slide back the cover in the direction of the arrow to lock it.
Three-step diagram showing how to open the SIM card slot, insert the SIM card, and close the slot on the alarm panel.

Image: SIM card installation steps.

Once the cellular icon at the top of the home screen turns white, your panel is connected to a cellular network.

6.3 Download and Install APP

Scan the QR code or search for "Smart Life" in Google Play/App Store to download the free application. The app will guide you through registering and connecting the panel to the internet.

QR code for downloading the Smart Life app.

Image: QR code for Smart Life app download.

Add Your Panel to the App

  1. Ensure your phone's Bluetooth is on and connected to your home's 2.4GHz Wi-Fi network (5GHz networks are not supported).
  2. On your panel, go to Settings > Wi-Fi > Wi-Fi Configuration. The screen will display "Configuring".
  3. On the APP home screen, tap + > Add Device in the top right corner to automatically scan for devices. Select your panel, enter the Wi-Fi password, and follow in-app instructions to complete the connection.

Video: Demonstrates connecting the alarm panel to the Tuya Smart app and basic arm/disarm functions using remote and RFID card.

6.4 How to Pair/Add Accessories

All accessories included in the kit are pre-paired. If you need to pair additional sensors, remote tags, or RFID tags, follow these steps:

  1. Go to Accessories > Add on the panel. The panel will enter pairing sniffer mode and start a countdown.
  2. Trigger the device you want to add:
To pairAction
Door sensorStart with the door sensor and magnet closely aligned, then separate them until the light comes on (do not activate the tamper switch).
Motion sensorTrigger with motion.
Remote tagPress any button.
RFID tagTap on the RFID tag reader zone.
KeypadEnter USER PASSCODE + DISARM BUTTON. If you want the doorbell button to be used, pair it again using the doorbell button.

Once an accessory is captured, a window will pop up. Tap to add it, or tap to cancel.

Tip: You can add up to 100 sensors, 40 remote tags, and 40 RFID tags.

6.5 How to Connect a Wireless Siren

Image of a 120 dB Mini wired siren with specifications.

Image: 120 dB Mini wired siren and its specifications.

  1. Press and hold the SET button of the siren until you hear one beep. The siren will enter sniffer mode, and its light ring will turn on.
  2. Within 20 seconds, go to Accessories > Siren Learn on the panel. The panel will display "Learn Signal Sent" and transmit a signal to the siren.
  3. The siren will give a long beep to indicate successful pairing.

Tip: In case of an alarm, the siren sounds at 110dB.

7. Operating Instructions

7.1 Do Some Settings Before Getting Started

How to Set Contacts

Up to 5 phone numbers can be set to receive SMS and alarm calls when an alarm is triggered.

  • Go to Contacts > Call-Phone Number. Tap to select a number to edit for alarm calls, then tap to save.
  • Go to Contacts > SMS-Phone Number. Tap to select a number to edit for alarm text messages, then tap to save.

Tip: You can also set phone numbers in the Setting page of your panel through the APP.

Tip: The panel will call stored contacts successively (up to 2 rounds). If a call is answered and a Keypad Command is used, it will stop calling. Otherwise, it continues until 2 rounds are complete. When a stored phone number calls the panel, two-way talk is automatically connected.

Keypad Commands

Button on PhoneWhat Happens
1Arm
2Disarm or silence when the alarming is sounding
3 or 4Two-way talk

How to Enable Keypad Lock

For additional security, you can require a passcode to unlock your panel.

  1. Go to Settings > Auto-Lock > Auto-Lock to turn this feature on.
  2. Go to Settings > Auto-Lock > Password to change your passcode.

Tip: Keypad locks automatically if you don't operate the keypad on the home screen for about 30 seconds.

Exit / Entry Delay

These delays allow you to enter and leave your home without triggering the alarm.

Exit Delay

Allows you to leave your home after arming. When in Away Arm Mode, a countdown tick indicates the system is preparing to arm. Once the delay ends, the system is armed. You can adjust the countdown from 0 (no delay) to 999 seconds. Default is 40 seconds.

  • Go to Settings > Delay > Exit Delay to edit the delay value.
Entry Delay

Allows you to enter your home and disarm the system when in Away Arm Mode. A countdown tick indicates you have a short time before the alarm sounds. Disarm your system as soon as possible. You can adjust the countdown from 0 (no delay) to 999 seconds. Default is 30 seconds.

  • Go to Settings > Delay > Entry Delay to edit the delay value.

Tip: To disable the countdown tick during delay, go to Settings > Delay > Delay Tick.

Changing Sensor/Zone Response Type

Each sensor is assigned a Zone Mode, which defines how the system responds to faults in that zone.

  • On your panel, go to Accessories > Detector > Edit. Tap to select the sensor, then choose the type and mode, scroll to Enter, and tap to save.
  • On the APP, tap Accessories, select the sensor, then change the Zone Mode from the list below.
About Zone Mode:
  • Normal: Sensors activate in Arm (full arm) or HOME Mode. Recommended for window sensors.
  • 24 Hours: Sensors activate the alarm immediately when triggered, regardless of arm status.
  • Delay: Sensors trigger the alarm after the delay time. Recommended for door sensors as primary entryways.
  • Home: Sensors activate only in Arm (full arm). If Stay Arm Mode is used, these sensors are not armed. Recommended for PIR Motion Detectors.
  • 24 Hours Silent: Same as 24 Hours but without sound.
  • Home with delay: Same as Home but with Entry Delay in Arm.
  • Off: Disables the sensor.

You can give the accessory a nickname.

In the APP, select your accessory in the Accessories list, tap its name, then enter a nickname (max 16 characters) like "Front door", then tap save.

Changing Alarm Sound Volume

  • On your panel, go to Settings > Siren > Alarm Volume.
  • In the APP, go to Settings > Alarm sound volume to change the siren volume to high/low/mute. In mute mode, the siren will not sound.

Tip: To disable the arm/disarm beep, go to Settings > Siren > Arm Beep.

How to Record a Voice Message (only for some models)

Your system can record, play, or delete a brief voice message (up to 20 seconds) that will play when an alarm call is connected.

  • Record: Go to Record > Record. When the countdown starts, speak into the panel. The recording stops automatically after the time expires. Tap to save.
  • Play: Go to Record > Play to playback the recorded message.
  • Delete: Go to Records > Delete to delete the recorded message.
  • Duration: Go to Records > Duration to change the duration (1-20 seconds, default: 20s).

7.2 Using Your Security System

Away Mode

All sensors in your home are monitored. Useful when you're leaving home and want to be notified of any events.

How to Away-Arm:

  • Press the Arm button using a remote tag.
  • Press the Arm button on your panel when the keypad is unlocked.
  • Tap an RFID tag on the reader zone of the panel while in disarmed mode.
  • Tap the AWAY ARM icon through the APP.

Home Mode

All NORMAL sensors are monitored, but HOME sensors are not monitored. Useful when you are home but want to be alerted if someone tries to break in through a door or window.

How to Home-Arm:

  • Press the Home Arm button using a remote tag.
  • Press the Arm button twice on your panel when the keypad is unlocked.
  • Tap the HOME ARM icon through the APP.

Disarmed Mode

No sensors are monitored, except for 24 HOUR sensors. This allows you to move freely within your home.

How to Disarm:

  • Press the Disarm button using a remote tag.
  • Press the Disarm button on your panel when the keypad is unlocked.
  • Tap an RFID tag on the reader zone of the panel while in armed mode.
  • Tap the DISARM icon through the APP.

Tip: In the APP, tap Setting > Timer to edit schedules for automatic arming/disarming.

How to Trigger a Panic Alarm

  • On the home screen, tap SOS (Key 0) to trigger an emergency alarm.
  • Press the SOS button using a remote tag.
  • Tap the SOS icon through the APP.

Make a Call on Panel

On the home screen, tap one of the digits from 1 to 9 to enter the dialing screen, enter the number, then tap ✓ to dial.

Important: The call will be canceled if the cellular network is not registered, the system is armed, or if you are already in a voice call.

8. Maintenance

  • Battery Care: Ensure the alarm panel's backup battery is charged. If the battery switch is off, the panel cannot be powered by the built-in battery during AC loss. Replace sensor batteries (CR2032 for door/window, AA for PIR, CR2025 for remote) as needed to ensure optimal performance.
  • Cleaning: Regularly wipe down the alarm panel and sensors with a soft, dry cloth to prevent dust buildup. Avoid using harsh chemicals or abrasive cleaners.
  • Signal Strength: Periodically check the Wi-Fi and cellular signal strength on the panel to ensure reliable communication.
  • Firmware Updates: Check the Tuya Smart app for any available firmware updates for your alarm system to ensure you have the latest features and security enhancements.

9. Troubleshooting

IssueReasonSolution
Panel alarms when closing door while armed, not opening.Door sensor paired with a closing signal.Pair again. Start with door sensor and magnet closely aligned before entering pairing mode.
Panel not powered by built-in battery during AC loss, or battery not fully charged.Battery switch is off.Turn on the battery switch to ON.
Time error when registering to cellular network.Time provided by cellular network is incorrect or unavailable.Go to Settings > Timer > 2G/4G Sync to turn this feature off.
Weather not available.Wi-Fi not connected to internet.Connect your panel to a Wi-Fi network that can connect to the internet.
Password forgotten.Contact your seller for a solution.

10. User Tips

  • Regular Testing: Periodically test your alarm system (e.g., once a month) by triggering a sensor to ensure it's functioning correctly and sending notifications.
  • Battery Check: Pay attention to low battery warnings for sensors. Promptly replace batteries to avoid security gaps.
  • App Integration: Utilize the Tuya Smart app for remote control, monitoring, and customizing settings, as it offers a convenient way to manage your system.
  • Zone Naming: Customize the names of your wireless defense areas and accessories in the app (e.g., "Front Door," "Living Room PIR") for easier identification of triggered alarms.
  • Voice Control: Integrate with Amazon Alexa or Google Assistant for hands-free arming and disarming, enhancing convenience.

11. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact your seller or the manufacturer directly. Refer to the official product page or packaging for specific contact details.

A PDF version of this user manual is available for download: View User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.