1. Product Overview
The WEST BIKING Magnetic Control Smart Tail Light is a switchless, intelligent human-machine interaction device designed for cycling enthusiasts. It features innovative magnetic control technology, intelligent sensing, shaking control, and durable protection. It serves as a safety warning tool for daily cycling and leisure.

Figure 1: Product Overview - Magnetic Control Intelligent Taillights
Video 1: Product Demonstration and Features
2. Package Contents
Please check the package for the following items:
- Smart Taillight (Monochrome or Colorful style)
- Saddle Rail Bracket
- Seat Post Bracket
- USB Charging Cable
- Cable Ties (for mounting)

Figure 2: Package Contents and Monochrome Style Details
3. Setup and Installation
3.1 Charging the Taillight
- Connect the USB charging cable to the taillight's charging port.
- Connect the other end of the USB cable to a standard USB power source (e.g., computer, USB wall adapter).
- Charging Indicator: During charging, the red indicator light will breathe and flash.
- Full Charge Indicator: When fully charged (approx. 2 hours), the green indicator light will stay solid.
- Note: The taillight cannot operate while it is charging.
3.2 Installation Methods
The taillight offers two installation options:

Figure 3: Detailed Installation Steps
Method 1: Saddle Rail Mount
- Secure both ends of the saddle rail bracket under your bicycle's seat cushion using the provided cable ties.
- Insert the taillight into the installed saddle rail bracket until it clicks securely.
- Installation is complete.
Method 2: Seat Post Mount
- Secure the seat post bracket to your bicycle's seat post using the provided cable ties.
- Insert the taillight into the installed seat post bracket until it clicks securely.
- Installation is complete.
4. Operating Instructions
4.1 Power On/Off and Smart Mode
- Automatic Activation: When the taillight is attached to its magnetic base, it automatically triggers the full smart mode. It intelligently detects ambient light and motion status for automatic start/stop and brake warning.
- Automatic Shutdown: The taillight will automatically turn off 15 seconds after being detached from its base.
4.2 Switching Lighting Modes
- When Detached: After detaching from the base, shake the taillight within 15 seconds to cycle through different lighting modes. It will shut down 15 seconds after you stop shaking.
- Power On (from off state): Vigorously shake or flick the taillight to power it on.
- Tactile Feedback: The device provides vibration feedback during operation.
4.3 Smart Features
- Brake Sensing: The taillight detects braking and illuminates with high brightness to warn others.
- Light Sensing: Automatically adjusts brightness based on ambient light conditions.
- Motion Sensing: Detects riding motion to activate and deactivate.
4.4 Battery Indicator
- 10%-100% Battery: Green indicator light flashes.
- 1%-10% Battery: Red indicator light flashes (charging is recommended).
- Below 1% Battery: Red indicator light flashes rapidly, then the device shuts down.
5. Maintenance
- Cleaning: Wipe the taillight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Waterproofing: The taillight has an IP67 waterproof rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. Ensure the charging port cover is properly sealed when not charging to maintain water resistance.
- Storage: Store the taillight in a cool, dry place when not in use for extended periods.
6. Troubleshooting
- Light not turning on: Ensure the battery is charged. If newly received, charge it first to activate the smart induction mode.
- Light not changing modes: Ensure the taillight is detached from its base when attempting to change modes by shaking.
- Light not responding: Try fully charging the device. If issues persist, contact customer support.
7. Specifications

Figure 4: Product Parameters
| Feature | Specification |
|---|---|
| Brand Name | WEST BIKING |
| Product Name | BCA600 Magnetic Control Intelligent Taillights |
| Model Number | YP0701508-09 |
| Weight | 39g (excluding bracket) |
| Material | Aluminum Alloy + PC |
| Battery | 400mAh Lithium Battery |
| Waterproof Grade | IP67 |
| LED Beads (Monochrome) | 27 High-Brightness LED Beads |
| LED Beads (Colorful) | 36 High-Brightness LED Beads |
| Charging Input | 5V-1A |
| Charging Time | Approx. 2 hours |
| Dimensions | 60mm (width) x 85mm (height) - approximate |
Battery Life (Approximate)
Monochrome Style:
- Stays Light: ≈15H
- Flashing: ≈23H
- Breathing Flash: ≈22H
- Three-Light Chasing: ≈28H
- Single-Light Chasing: ≈40H
- Three-Light Strobe: ≈36H
- Convergent Flash: ≈23H
Colorful Style:
- Three-Color Light Chasing: ≈28H
- Red Light Flash: ≈36H
- 7-Color Cycle Breathing Flash: ≈25H
- Red Light Slow Flash: ≈25H
- 7-Color Cycle Three-Light Chasing: ≈29H
- Red-Green-Red-Blue Alternating Flash: ≈25H
- 7-Color Cycle Flash: ≈29H
- Red-Blue Chasing Flash: ≈36H
- Iridescent Chasing: ≈18H

Figure 5: Detailed Battery Life for Different Lighting Patterns
8. User Tips
- For initial use or if the light doesn't respond, ensure it is fully charged to activate the smart induction mode.
- Experiment with both saddle rail and seat post mounts to find the best visibility and fit for your bike.
- Always ensure the charging port cover is sealed to maintain waterproofing, especially before riding in wet conditions.
9. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please refer to the seller's official website or contact their customer service directly.
Precautions:
- Check the charging cable for integrity before charging.
- Do not point the light directly at human eyes when operating.
- Do not allow children to use this product without adult supervision.
- Keep this product away from fire sources and high-temperature objects.