Introduction
Thank you for choosing the AIHUMAO X8 Dual-Mode Bluetooth Wireless Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your mouse to ensure optimal performance. The X8 mouse features a multi-functional OLED screen, dual 2.4G and Bluetooth connectivity, 4-step DPI adjustment, a bass anti-slip button, and a 500mAh rechargeable battery, all within an ergonomic, streamlined design.
Package Contents
Please check the package for the following items:
- AIHUMAO X8 Wireless Mouse
- USB Receiver (stored inside the mouse)
- Type-C Charging Cable
- User Manual (this document)
Product Overview
Familiarize yourself with the components of your X8 mouse:

Figure 1: X8 Mouse Key Functions and Components
- Left Key: Standard left-click function.
- Right Key: Standard right-click function.
- Middle Key (Scroll Wheel): Scroll up/down, middle-click.
- DPI Adjust Button: Located near the scroll wheel, cycles through DPI settings.
- Forward/Backward Buttons: Side buttons for navigation.
- OLED Screen: Displays DPI value, battery level, and connection mode.
- Type-C Charging Port: For recharging the mouse battery.
- Mode Switching Button: Located on the bottom of the mouse, for switching between 2.4G, BT1, and BT2 modes.
- ON/OFF Switch: Power switch on the bottom.
- 2.4G Receiver Slot: Compartment for storing the USB receiver.
- Anti-slip Foot Pads: For smooth gliding and stability.
Setup and Connection
1. Charging the Mouse
Before first use, it is recommended to fully charge the mouse. Connect the provided Type-C charging cable to the mouse's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The OLED screen will indicate the charging status.

Figure 2: Type-C Charging Port and 500mAh Battery
2. Powering On/Off
Locate the ON/OFF switch on the bottom of the mouse. Slide it to the 'ON' position to power on the mouse. Slide it to 'OFF' to power off.
3. Connecting via 2.4G Wireless Mode
- Remove the USB receiver from its storage slot on the bottom of the mouse.
- Plug the USB receiver into an available USB port on your computer.
- Turn on the mouse using the ON/OFF switch.
- Press the Mode Switching Button on the bottom of the mouse until the OLED screen displays '2.4G'.
- Your computer should automatically detect the mouse. If it doesn't work immediately, restart your computer.
4. Connecting via Bluetooth Mode (BT1/BT2)
The X8 mouse supports two independent Bluetooth connections (BT1 and BT2).

Figure 3: Two Wireless Modes and Mode Switching Button
- Turn on the mouse using the ON/OFF switch.
- Press the Mode Switching Button on the bottom of the mouse to select either 'BT1' or 'BT2' mode. The corresponding indicator on the OLED screen will light up.
- For initial pairing, press and hold the Mode Switching Button for 3-5 seconds until the BT indicator on the OLED screen starts flashing rapidly. This indicates the mouse is in pairing mode.
- On your computer or device, go to Bluetooth settings and search for new devices.
- Select 'AIHUMAO X8' (or similar name) from the list of available devices to pair.
- Once paired, the BT indicator on the OLED screen will stop flashing and remain solid.
- Repeat steps 2-6 to pair with a second device using the other Bluetooth channel (BT1 or BT2).
Operating Instructions
1. DPI Adjustment
The mouse features 4 adjustable DPI steps (800-3200 DPI). Press the DPI Adjust Button (located behind the scroll wheel) to cycle through the available DPI settings. The current DPI value will be displayed on the OLED screen.

Figure 4: Multi-functional OLED Screen Display
2. OLED Screen Information
The multi-functional OLED screen provides real-time information about your mouse status:
- DPI Value: Shows the current sensitivity setting.
- Battery Level: Indicates the remaining battery charge.
- Connection Mode: Displays the active connection mode (2.4G, BT1, or BT2).

Figure 5: OLED Screen Indicators
3. Ergonomic Design
The X8 mouse features an engineering streamlined design for a tight-fitting hand shape, ensuring comfortable operation and stable, smooth movement during use.

Figure 6: Engineering Streamline Design
Maintenance
1. Cleaning
To clean your mouse, gently wipe the surface with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device. Do not use harsh chemicals or abrasive cleaners.
2. Battery Care
The X8 mouse has a built-in 500mAh rechargeable battery. To prolong battery life:
- Avoid fully discharging the battery frequently.
- Charge the mouse regularly, even if not in constant use.
- Store the mouse in a cool, dry place when not in use for extended periods.
3. USB Receiver Storage
When transporting the mouse or not using the 2.4G mode, store the USB receiver in its dedicated slot on the bottom of the mouse to prevent loss.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Mouse is off or battery is low. Incorrect connection mode. | Ensure mouse is ON. Check battery level on OLED screen and charge if necessary. Verify correct connection mode (2.4G, BT1, or BT2) is selected. |
| 2.4G connection issues | USB receiver not properly inserted. Driver issue. Interference. | Ensure USB receiver is fully inserted into a working USB port. Try a different USB port. Restart your computer. Move mouse closer to receiver. |
| Bluetooth connection issues | Mouse not in pairing mode. Device's Bluetooth is off. Already paired with another device. | Ensure mouse is in BT1/BT2 mode and in pairing mode (flashing BT indicator). Check if your device's Bluetooth is enabled. Remove previous pairings and re-pair. |
| Cursor movement is erratic or slow | Low DPI setting. Dirty sensor. Uneven surface. | Increase DPI using the DPI Adjust Button. Clean the optical sensor on the bottom of the mouse. Use the mouse on a clean, flat surface or a mouse pad. |
| OLED screen not displaying | Mouse is off or in sleep mode. | Ensure mouse is ON. Move the mouse or click a button to wake it from sleep mode. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | AIHUMAO |
| Model | X8 |
| Connectivity | Dual-Mode (2.4G Wireless + Bluetooth) |
| Power Type | Rechargeable (500mAh Battery Included) |
| DPI | 3600 (4 adjustable steps: 800-3200) |
| Operation Mode | Opto-electronic |
| Hand Orientation | Right |
| Style | Mini, DPI adjust button, Backlight |
| Package | Yes |
| Origin | Mainland China |
| Dimensions (L x W x H) | 19 cm x 11 cm x 5 cm |
| Weight | 0.2 kg |
User Tips
- Seamless Switching: Utilize the dual-mode connectivity to quickly switch between two different devices (e.g., a desktop via 2.4G and a laptop via Bluetooth) by pressing the mode button on the mouse bottom.
- Battery Management: Keep an eye on the battery indicator on the OLED screen to avoid unexpected power loss during important tasks. Charge the mouse overnight for convenience.
- DPI Customization: Experiment with the 4 DPI settings to find the sensitivity that best suits your task, whether it's precise graphic design work or fast-paced gaming.
- Ergonomic Comfort: The mouse's streamlined design is intended for right-handed users. Ensure a comfortable grip to maximize efficiency and reduce strain during long periods of use.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or retailer from whom you purchased the AIHUMAO X8 mouse. Please retain your proof of purchase for warranty purposes.
A PDF version of the user manual is available for download here.