BAOFENG F22

Contents

Baofeng F22 Mini Walkie Talkie User Manual

Model: F22

Introduction

The Baofeng F22 is a versatile FRS/PMR transceiver designed for reliable communication. It combines advanced radio technology with a durable build, making it suitable for both professional teams in various environments (construction sites, events) and leisure users who want to stay connected with friends and family. Please read this manual carefully before operation to ensure safe and proper use.

Package Contents:

ItemQuantity (per radio)
Radio Host1
Li-ion Battery1
Belt Clip1
Lanyard/Hand Strap1
User Manual1

Note: The exact quantity of accessories may vary depending on the package purchased (e.g., 2-pack).

Main Features

  • 22 FRS/PMR Channels
  • 12 NOAA Weather Channels (FRS Version Only)
  • 155 Privacy Codes (50 CTCSS / 105 DCS)
  • Hands-Free Operation (VOX)
  • Roger Beep Tone
  • Battery Level Meter & Power Saver
  • Low Battery Audible Alert
  • Built-in LED Flashlight & Emergency Strobe Light
  • Backlit LCD Display
  • Keypad Lock
  • Channel Scan & Monitor Functions
  • 10 Selectable Call Alerts
  • 2-pin Kenwood Headset Jack
  • Type-C USB Connector for Charging
  • Output Power: ≤2W (channels 1-7 and 15-22)
  • Battery Life: Up to 18 hours (typical use)

Product Overview

Familiarize yourself with the components of your Baofeng F22 walkie talkie.

Baofeng F22 Walkie Talkie Labeled Diagram
Figure 1: Baofeng F22 Walkie Talkie Components
1. Antenna, 2. Backlit LCD Display, 3. UP Button, 4. Menu/Lock Button, 5. Power/Call Button, 6. DOWN Button, 7. Speaker, 8. Belt Clip Lock Tab, 9. Flashlight, 10. Belt Clip, 11. MONI Button (for weak signal monitoring), 12. Accessory Port, 13. Scan Button, 14. Type-C USB Charging Port, 15. Battery release latch, 16. PTT (Push-To-Talk) Button, 17. Flashlight Emergency Button.

LCD Display Indicators:

  • NOAA Weather Band Indicator: Shows when NOAA weather band is active.
  • Scan Indicator: Appears during channel scanning.
  • VOX Indicator: Indicates VOX (Voice Operated eXchange) is active.
  • Dual Watch Indicator: Shows when Dual Watch mode is active.
  • CTC/DCS Indicator: Displays when CTCSS/DCS privacy codes are in use.
  • Channel Indicator: Shows the current channel number.
  • Transmit (TX) Status Indicator: Appears when transmitting.
  • Receive (RX) Status Indicator: Appears when receiving.
  • Keypad Lock Indicator: Shows when the keypad is locked.
  • Volume Level Indicator: Displays the current volume level.
  • Battery Level Indicator: Shows remaining battery power.

Setup

1. Battery Installation

Your radio can be powered by either a Li-ion battery pack (included) or three AA alkaline batteries (not included). Remove the belt clip first for easier access.

To Install Li-ion Battery:

  1. Turn the radio off.
  2. With the back of the radio facing you, remove the belt clip.
  3. Press down on the top center of the battery cover and slide it down to remove.
  4. Lift the battery cover latch up and remove the cover.
  5. Insert the Li-ion battery pack with the diagram facing you. Incorrect installation will prevent operation or damage the unit.
  6. Close the battery cover and replace the belt clip, ensuring it locks into place.

To Install Three AA Ni-MH Batteries (Rechargeable):

Warning: Ni-MH batteries are rechargeable and must not be mixed with alkaline batteries.

  1. Turn the radio off.
  2. Remove the battery cover as described above.
  3. Insert three AA Ni-MH batteries, observing the correct + and - polarity.
  4. Close the battery cover and replace the belt clip.

To Install Three AA Alkaline Batteries (Non-Rechargeable):

Warning: Alkaline batteries are for emergency use only and cannot be recharged. Charging alkaline batteries poses an explosion risk.

  1. Turn the radio off.
  2. Remove the battery cover as described above.
  3. Insert three AA alkaline batteries, observing the correct + and - polarity.
  4. Close the battery cover and replace the belt clip.

2. Belt Clip Installation

Slide the belt clip down into the slot on the back of the radio until it clicks. To remove, press the lock-tab down and pull the clip up.

3. External Speaker/Microphone or Headset

Your radio supports an optional external speaker/microphone or headset for hands-free operation.

  1. Open the rubber cap on the side of the radio.
  2. Insert the plug(s) into the SPK/MIC jacks.
  3. Position the earbud and microphone as desired.

Important: The radio is not waterproof when the headset jack is in use. Ensure the jack cover is fully pressed into place when not using a headset to restore water resistance.

4. Charging the Battery

The Baofeng F22 supports direct Type-C USB charging. For fastest charging, turn off the radio.

Baofeng F22 Power Sources Diagram
Figure 2: Power Sources and Charging Options
The radio can use a rechargeable Li-ion battery pack or 3 AA alkaline batteries. It supports Type-C USB charging.

Warning: Only use accessories specifically designed for this product to avoid personal injury or property damage.

Using the Type-C USB Port:

  1. Connect a Type-C USB cable to the radio's port.
  2. Connect the other end to a USB power source (e.g., wall adapter, power bank, PC).
  3. Charge the batteries until the battery indicator stops flashing (approximately 6 hours).
Baofeng F22 USB Type-C Charging Examples
Figure 3: USB Type-C Charging Examples
Charge your radio conveniently via vehicle charging, USB wall adapter, power bank, or PC.

Warning: Do not charge alkaline batteries. If the radio will not be used for a long time, remove the batteries.

Operating Instructions

1. Power On/Off and Volume Adjustment

  1. Press and hold the Power/Call button to turn the radio on.
  2. Use the UP or DOWN buttons to adjust the volume level.
  3. Press and hold the Power/Call button again to turn the radio off.

2. Choosing a Channel

Your radio has 22 FRS/PMR channels. To communicate, both radios must be set to the same channel and privacy code.

  1. Press the MENU button once.
  2. Use the UP or DOWN buttons to select a channel (1-22).
  3. Press PTT or MENU again to confirm and move to the next setting.

Note: Channels 1-7 and 15-22 use high-power transmission; channels 8-14 use low-power transmission.

3. Talking on Your Radio (PTT)

  1. Press and hold the PTT button.
  2. Speak clearly into the microphone (2-3 inches away). The TX icon will appear.
  3. Release the PTT button when finished speaking. The RX icon will appear when receiving.

4. Monitor Mode

This feature allows you to listen for weak signals on the current channel.

  1. To turn ON: Press and hold the MONI button for 2 seconds until two beeps sound. The receiver circuit opens, and the RX icon blinks.
  2. To turn OFF: Press and hold the MONI button for 2 seconds again. Two beeps sound, and the RX icon disappears.

5. Channel Scanning

Your radio can scan all 22 channels for activity.

  1. To enter: Quickly press the SCAN button. The radio will scan and stop on any active channel.
  2. To exit: Quickly press the SCAN button again.

When an active channel is found, scanning pauses for 5 seconds. Pressing PTT on an active channel stops scanning for 10 seconds.

6. Scanning Privacy Codes

This function scans for active CTCSS/DCS privacy codes.

  1. Press and hold the SCAN button.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.