1. Introduction
The GuliKit ES E-sports Controller is a high-performance wireless gamepad designed for a superior gaming experience across multiple platforms. Featuring Hall Effect joysticks, tactile switches, and low-latency connectivity, it offers precision and durability for competitive play. This manual provides detailed instructions for setting up, operating, and maintaining your controller.

Figure 1: GuliKit ES E-sports Controller with highlighted features and multi-platform compatibility.
2. Safety Information
CAUTION!
This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children. Please keep the controller and its accessories out of reach of small children.
3. Setup and Pairing
Before first use, ensure your controller's firmware is updated to the latest version by visiting the official GuliKit website.
3.1. Controller Overview

Figure 2: Front view of the GuliKit ES Controller.

Figure 3: Back view of the GuliKit ES Controller with mode switch.

Figure 4: Top view of the GuliKit ES Controller showing the USB-C port and shoulder buttons.
3.2. Power On/Off
- Power On: Press the Power-Off Button (Home button) once.
- Power Off: Press and hold the Power-Off Button (Home button) for a few seconds.
The controller will automatically power off after 15 minutes of inactivity. When connected via USB or if Auto-Continuous Fire (Turbo) is active, the controller will not power off automatically.
3.3. Pairing Methods with PC (Windows, macOS, Steam)
The GuliKit ES Controller supports both Bluetooth and wired connections for PC.
Bluetooth Pairing (730Hz Polling Rate)
- Switch the controller to PC mode using the slide switch on the back.
- Press and hold the Pairing Button for 2 seconds until the indicator light flashes rapidly.
- On your computer, open Bluetooth settings, search for new devices, and select "GuliKit XW Controller" to pair.
- Once the interface displays "Connected," pairing is complete.
Wired Connection (1000Hz Polling Rate)
- Set the controller to PC mode.
- Connect one end of a USB-C to USB-A data cable to the controller, and the other end into a USB-A port on your computer.
- For desktop computers, it is recommended to use a USB port on the back of the computer case for a more stable connection.
3.4. Wireless Pairing with Android Devices (Android, iOS)
- Set the controller to PC mode.
- Press and hold the Pairing Button for 2 seconds until the indicator light starts blinking quickly.
- On your phone or tablet, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- The interface will display "Connected" once pairing is complete.
3.5. Pairing Methods with Nintendo Switch / Switch 2
The GuliKit ES Controller supports instant wake-up for Nintendo Switch and Switch 2.
- Set the controller to NS mode using the slide switch on the back.
- Turn the controller on.
- Press and hold the Pairing Button for 2 seconds. The indicator light will blink quickly, indicating pairing mode has started.
- For Switch 2 Wake-up (Very Important): Turn your Switch 2 into black screen (sleep) mode first. Then, press the HOME button on a Joy-Con to wake the screen. This will bring up the controller pairing interface.
- Once the interface shows that a new controller is connected, the pairing is complete.
Video 1: Special pairing method for Switch 2 wake-up, demonstrating the steps to connect the GuliKit ES controller to a Nintendo Switch 2 console.

Figure 5: Visual guide for Switch 2 wake-up pairing.
4. Operating Instructions
All customized settings require holding the Setting button while pressing the corresponding buttons. When customized settings are configured, the indicator light will turn blue. When no customized settings are configured, the indicator light will remain white.
4.1. Joysticks Calibration
To ensure optimal joystick performance, you can recalibrate them:
- While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "B" buttons simultaneously for 6 seconds to enter calibration mode.
- During calibration, rotate both the left and right joysticks in full circles 2 to 3 times.
- Once calibration is complete, the controller will vibrate once to indicate success and will automatically exit calibration mode.

Figure 6: GuliKit ES Controller featuring Hall Effect Joysticks for anti-drift and high precision.
4.2. Joystick Dead Zone Setting
To adjust the joystick dead zone:
- One vibration: Enables dead zone on joysticks.
- Long vibration: Disables dead zone on joysticks (Default).

Figure 7: Visual representation of joystick deadzone adjustment.
4.3. Adjust Vibration Intensity
The controller features asymmetric dual-rotor vibration motors for immersive gaming. You can adjust the intensity:
- One vibration: Weak vibration.
- Two vibrations: Standard vibration (Default).
- Three vibrations: Strong vibration.
- Long vibration: Turns off vibration.

Figure 8: Asymmetric Rotary Vibration Motors for immersive gaming.
4.4. Continuous Fire (Turbo) Setting
The controller supports semi-auto and full-auto continuous fire for A/B/X/Y/R/ZR buttons:
- One vibration: Manual Turbo Mode (continuous fire activated while holding the button, stops when released).
- Two vibrations: Auto Turbo Mode (press once to start continuous fire, press again to stop).
- Long vibration: Disables both manual and auto turbo modes (Default).

Figure 9: Semi-auto and Full-auto Turbo Functionality.
4.5. Other Features
- Built-in Gyro: For motion controls in Switch games.
- Tactile Switch D-pad: Sensitive and accurate input.
- Replaceable Keycaps: PC-layout replaceable 3-color keycaps are available (Switch-layout keycaps for physical swap sold separately).

Figure 10: Built-in Gyro for Motion Controls in Switch Games.

Figure 11: Tactile Switch D-pad for sensitive and accurate input.

Figure 12: PC-layout replaceable 3-color keycaps.
5. Maintenance
5.1. Battery Information
The GuliKit ES Controller is equipped with a 950mAh polymer battery, providing up to 30 hours of gameplay based on full-auto Turbo mode testing with non-vibration. The ES model requires a separate USB-C cable for charging.

Figure 13: 950mAh Polymer Battery for extended play.
5.2. General Care
- Keep the controller clean by wiping it with a dry, soft cloth.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Do not disassemble the controller, as this may void the warranty.
- Store the controller in a safe place to prevent damage.
6. Troubleshooting
6.1. Pairing Issues
- Ensure the controller is in the correct mode (PC or NS) for your device.
- Make sure the controller is charged.
- If connecting to Switch 2, follow the special pairing method (black screen mode) as described in Section 3.5.
- If issues persist, try clearing all settings (reset) as described below.
6.2. Connectivity and Latency
The GuliKit ES Controller boasts a 1000Hz wired polling rate and 730Hz Bluetooth polling rate, offering low latency. However, certain factors can affect performance:

Figure 14: Polling Rate and Latency Explanation with test results.
- Windows 10/11 Bluetooth: Disable "Show notifications to connect using 'Swift Pair'" in settings. Enabling this adds ~1ms latency and reduces report rate by 50-300Hz.
- Multiple Devices: When connecting multiple devices to one Bluetooth adapter, bandwidth sharing may lower polling rates. For optimal performance, use one adapter per controller.
- Wi-Fi Interference: Use 5GHz Wi-Fi to avoid 2.4GHz interference with Bluetooth, which may reduce polling rates.
6.3. Clear All Settings (Reset)
To reset the controller to its default settings, hold the Setting button and press the Power-Off button (Home button) until you feel a long vibration. This indicates the reset process is complete.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | GuliKit ES E-sports Controller |
| Compatible Platform | Nintendo Switch, Nintendo Switch 2, PC, Android, Steam, Raspberry Pi |
| Compatible Nintendo Model | Nintendo Switch 2, Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Interface Type | USB, Bluetooth |
| Joystick Sensor Module Brand/Type | GuliKit (Hall Effect) |
| Hall Effect | Yes |
| Trigger Button Type | Hall-Linear (256-Level Hall Effect Triggers) |
| D-pad Switch Type | Tactile switch |
| Bumpers Switch Type | Membrane |
| Battery Included | Yes (950mAh Polymer Battery) |
| Support Software Configuration | No |
| RGB Lighting Joysticks | No |
| Wear-resistant Joysticks | No |
| Package | Yes |
| Origin | Mainland China |
| Certification | CE |
| Product Dimensions (L x W x H) | 10cm x 15cm x 8cm |
| Product Weight | 0.385 kg |

Figure 15: Feature comparison between GuliKit ES and ES PRO controllers.
8. User Tips
- For competitive gaming, always prefer a wired connection to achieve the lowest possible latency (1.87ms).
- If experiencing input lag with Bluetooth on PC, check your Windows settings for "Swift Pair" notifications and disable them.
- When playing on Switch, utilize the built-in gyro for enhanced motion control in compatible games.
- Experiment with the vibration intensity settings to find your preferred level for different games.
- Consider purchasing additional keycaps if you prefer a different button layout or color scheme.
9. Warranty and Support
For detailed warranty information, troubleshooting guides, and frequently asked questions, please refer to the official GuliKit website or the comprehensive user manual PDF:
- Official Website: www.gulikit.com
- User Manual (PDF): View User Manual (PDF)
If you encounter any issues not covered in this manual, please contact GuliKit customer support through their official website.