SLyric Portable high-power ice cold triple laser 755 808 1064 device

Contents

SLyric Portable High-Power Triple Wavelength Diode Laser Hair Removal Device User Manual

Brand: SLyric | Model: Portable high-power ice cold triple laser 755 808 1064 device

1. Introduction to Diode Laser Hair Removal

Diode Laser is the new-generation of laser hair removal. It's an effective and permanent hair reduction solution that is simple and easy. It takes cutting-edge laser technology and combines it with the comfort and convenience of a trip to the spa. In fact, Diode Laser uses new breakthrough technology that has been described as one of the most comfortable laser hair removal options available.

By delivering laser energy to the hair follicles, it disrupts their ability to grow, achieving long-lasting hair removal results.

Diagram illustrating how diode laser works
Figure 1: Illustration of Diode Laser Hair Removal Mechanism

2. Product Overview

The SLyric Portable High-Power Triple Wavelength Diode Laser Hair Removal Device offers advanced technology for effective and comfortable hair removal. It combines 755nm, 808nm, and 1064nm wavelengths to target various hair types and skin tones.

2.1 Device Views

Front view of the SLyric laser hair removal device
Figure 2: Front View of the Device
Rear view of the SLyric laser hair removal device showing ports and warning label
Figure 3: Rear View of the Device with Water Ports and Power Input

2.2 Included Components

The package includes the following items:

Image showing various components: Air box, Handle, Power Line, Glasses, Funnel, Key
Figure 4: Device Components
  • Air Box: For safe storage and transport.
  • Handle: The treatment applicator.
  • Power Line: To connect the device to a power source.
  • Glasses: Protective eyewear for the user and client.
  • Funnel: For water filling.
  • Key: For operating the device's key switch.

3. Specifications

AttributeValue
Voltage110V
Efficacy Principle of EpilatorLaser/IPL/Radio Frequency
Number of Lamp Heads1
Power TypeElectric
Power SourceElectric
Use AreasBODY, Underarm, Bikini, Whole Face
Item TypeEpilator
CertificationRoHs, CE
Laser Energy10-2000mj
Power2000w/3000w
ApplicationFor Commercial, Beauty Center & Click

4. Setup

4.1 Initial Inspection

Before first use, carefully unpack all components and inspect for any damage. Ensure all listed components are present.

4.2 Water Filling

Important Warning: Do NOT operate the machine without filling water into the machine. Use distilled water only. Please pay attention to the water level. Failure to do so may damage the machine.

  1. Locate the "Injection" port at the rear of the device (refer to Figure 3).
  2. Using the provided funnel, carefully fill the device with distilled water until the water level is appropriate (consult the device's screen or indicator if available).
  3. Ensure the "Overflow" port is not blocked during filling.

4.3 Power Connection

  1. Connect the power line to the "220V Input Voltage" port at the rear of the device (refer to Figure 3).
  2. Plug the power line into a suitable 110V electrical outlet.
  3. Ensure the key switch is in the OFF position before connecting power.

5. Operation

5.1 Powering On

  1. Insert the key into the key switch and turn it to the ON position.
  2. Press the main power button (usually illuminated) to turn on the device.
  3. The touch screen display will activate.

5.2 Interface and Settings

The device features an intelligent LCD screen for easy operation. You can adjust parameters such as Fluence (J/cm²), Pulse (ms), and Frequency (Hz).

Video 1: Demonstration of device screen operation and laser firing.

5.3 Freezing Point Painless Technology

The machine incorporates freezing point painless hair removal technology, ensuring minimal impact on the skin and no harm to sweat glands. This technology not only prevents any adverse effects on human metabolism and sweating but also offers skin whitening and rejuvenating benefits. The transparency of human skin allows the powerful 808nm to penetrate effectively and reach the hair follicles, making the 808 semiconductor highly accurate and efficient in hair removal.

Diagram illustrating freezing point painless technology
Figure 5: Freezing Point Painless Technology

5.4 Hair Removal Process

The 808nm laser is applied to the skin, penetrating through to the hair shaft where melanin concentration is the highest. The light is transformed into heat, vaporizing the hair shaft and a significant part of the hair. The high temperature also damages the follicular epithelium, leading to the loss of hair. Since hair follicles are most receptive during their growth phase, and only a fraction of hair is in this phase at any given time, multiple treatments are necessary for comprehensive hair removal.

Diagram showing laser targeting hair follicles
Figure 6: Laser targeting the hair follicle
Detailed diagram of the hair removal process
Figure 7: The Hair Removal Process

6. Treatment Areas and Parameters

This machine is capable of permanently removing excess hair from various body parts. Its versatility makes it a suitable option for a wide range of hair removal needs.

Diagram showing various body parts suitable for hair removal
Figure 8: Whole Body Hair Removal Application Areas

Specific parameters (Fluence, Pulse, Frequency) should be adjusted based on the treatment area, hair type, and skin tone. Always start with lower settings and gradually increase as needed, ensuring client comfort and safety. Consult a qualified professional for detailed parameter guidance.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your device.

7.1 Cleaning

Regularly clean the device's exterior with a soft, damp cloth. Ensure the treatment handle is cleaned and disinfected after each use according to standard hygiene protocols for beauty equipment.

7.2 Water Replacement

Periodically check and replace the distilled water in the system as recommended by the manufacturer or if water quality deteriorates.

7.3 Storage

When not in use, store the device in its air box in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter any issues with the device, please refer to the following general advice:

  • Device not powering on: Check power connections, ensure the key switch is ON, and the main power button is pressed.
  • No laser emission: Verify that the device is in 'READY' mode on the screen and the handle is properly connected.
  • Unusual noises or smells: Immediately power off the device and contact customer support.

For complex issues, please contact customer service for assistance.

9. Safety Information

Always prioritize safety during operation. Ensure both the operator and client wear appropriate protective eyewear. Do not direct the laser beam at eyes or reflective surfaces.

9.1 Post-Treatment Care

After treatment, the skin may experience temporary redness or swelling. Apply soothing and moisturizing products. Avoid direct sun exposure and use sunscreen. Refrain from strenuous activities, swimming, or saunas for a short period. Avoid alcohol consumption as it may prolong redness.

10. User Tips

No specific user tips are available from customer reviews or Q&A at this time. Always follow the instructions in this manual for best results.

11. Warranty and Support

The device comes with a 1-year warranty. For after-sales service, online customer service is available to help judge situations and provide advice. If online support is insufficient, engineers will provide a pinpoint solution.

Diagram outlining service offerings including warranty and training
Figure 9: Our Service Offerings

11.1 Training and OEM/ODM Services

A complete user manual and usage video are provided for instruction and application. 24/7 online consultant service is available for support.

For customization or OEM/ODM services, such as changes to the Logo, operating system background, or language, please contact our staff for more information.

12. Frequently Asked Questions (FAQ)

FAQ section header image
Q2: How is your after-sale service?
Online customer service: Customers can contact us online if they meet any questions, and our staff will help to judge the situation and give our advice. Most problems will be solved at this stage. Engineer Judgement: If our customer service does not work, our engineers will give their pinpoint solution to each case. Warranty: Up to 24 months for repairing or replacement. During the warranty period, customers will enjoy free repairing parts or necessarily replacement due to material and workmanship problems. But any man-made or inappropriate conduct damage will be excluded.
Q3: Will you teach how to use the machine?
We can provide a complete user manual and usage video for instruction and application. And 24/7 online consultant service ensures you whatever problem and whenever you meet, you can solve easily.
Q4: Can you do OEM&ODM service?
If customer have any needs for customization or OEM service, please contact our staff for more information. For appearance change, like Logo, operating system background, outlook adding, print, language, it would be easy to achieve.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.