LINYILIGHT LED Motion Sensor Night Light

Contents

LINYILIGHT LED Motion Sensor Night Light User Manual

Model: LED Motion Sensor Night Light

1. Product Overview

The LINYILIGHT LED Motion Sensor Night Light is a versatile, rechargeable, and magnetic lighting solution designed for various indoor spaces. It features a motion sensor for automatic illumination, adjustable color temperatures, and multiple operating modes for convenience and energy efficiency.

Key Features:

  • Motion Sensor: Automatically turns on when motion is detected, enhancing convenience and saving energy.
  • LED Light Source: Provides bright, efficient, and long-lasting illumination.
  • Multi-Function Use: Can be used as a wall lamp, table lamp, or hand-held flashlight. Ideal for bedside, drawers, cupboards, refrigerators, stairways, and hallways.
  • Magnetic Design: Easy to attach and detach from its base or any metal surface.
  • Rechargeable: Built-in 500mAh polymer lithium battery, charged via Type-C USB.
  • Adjustable Color Temperature: Cycles through Cool White, Warm White, and Neutral White.

2. Safety Information

Please read and understand all safety instructions before using this product.

  • Do not use this product in humid environments (e.g., bathrooms) as contact with water may cause malfunction or damage.
  • Do not strike or drop this product, as severe vibrations may damage internal components.
  • Do not disassemble or attempt to repair this product yourself.
  • Do not throw the product into fire, as the internal battery may explode and pose a hazard (conforms to EU Directive 2013/56/EU).
  • Do not allow children under 7 years old to use this product unsupervised.

3. Setup and Installation

Package Contents:

  • LED Motion Sensor Night Light
  • Magnetic Base with Adhesive
  • USB Type-C Charging Cable (not always included, check packaging)

Installation Steps:

  1. Prepare Surface: Choose a clean, dry, and smooth surface for mounting the magnetic base.
  2. Attach Base: Peel off the adhesive backing from the magnetic base. Firmly press the base onto the desired surface and hold for a few seconds to ensure strong adhesion.
  3. Attach Light: The night light has a built-in magnet. Align the back of the light with the magnetic base; it will snap into place with a soft 'click'.
  4. Alternative Mounting: The light can also be directly attached to any metal surface (e.g., refrigerator) without the adhesive base.
Magnetic attachment of the night light to its base

Figure 1: Magnetic design for quick attachment and removal.

Installation Demonstration Video:

Video 1: Product demonstration including installation, motion sensing, and portability.

4. Operating Instructions

Powering On/Off and Mode Selection:

The light features a switch for power and mode selection. Short presses cycle through the modes:

  1. 1st Short Press (Flashes 3 times): Night Sensing Mode
    The light activates only in darkness when motion is detected within range.
  2. 2nd Short Press (Flashes 2 times): 24/7 Sensing Mode
    The light activates anytime motion is detected, day or night.
  3. 3rd Short Press: Always-On Mode
    The light remains steadily on.
  4. 4th Short Press: Turns Off
    The light is turned off.
Diagram showing the three operating modes of the night light

Figure 2: Operating modes: Night Sensor, All-Day Sensor, and Constant Light.

Motion Sensor Functionality:

  • When human activity is detected in a dark environment (in Night Sensing Mode), the light will automatically turn on for 15 seconds and then turn off.
  • Sensing Range: Approximately 4 meters, within a 120-degree horizontal angle.
  • Note: In sensing mode, if the night light is already on, the human body sensing function will be temporarily disabled to prevent immediate re-triggering.
Comparison of Daytime Mode and Night Mode for motion sensing

Figure 3: Daytime Mode (auto on all day) and Night Mode (auto on in darkness).

Color Temperature Adjustment:

When the light is on, press and hold the switch for more than 2 seconds to cycle through the color temperatures:

  • Cool White: Bright light for reading without eye strain.
  • Neutral White: Soft light, suitable for general use.
  • Warm White: Warm light for comfortable ambiance at night.
Three adjustable color temperatures: White, Natural, and Warm light

Figure 4: Adjusting color temperature by long-pressing the switch.

Charging the Device:

The night light has a built-in rechargeable battery. When the battery is low, recharge it using the provided USB Type-C cable.

  • Connect the Type-C end of the cable to the charging port on the light.
  • Connect the USB-A end to a standard USB power adapter (not included) or a computer USB port.
  • Charging Indicator: A red light indicates the device is charging. The light will turn off when fully charged.
Close-up of the sensor, Type-C charging port, and switch

Figure 5: Location of the sensor, Type-C charging port, and switch.

5. Maintenance

  • Cleaning: Wipe the surface of the night light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the light output diminishes.
  • Storage: If storing for an extended period, charge the device fully and store it in a cool, dry place. Recharge every few months to maintain battery health.

6. Troubleshooting

  • Light does not turn on: Ensure the battery is charged. Check the selected mode (e.g., if in Night Sensing Mode, ensure it's dark enough).
  • Motion sensor not working: Ensure the sensor is not obstructed. Check if the light is in the correct sensing mode (Night Sensing or 24/7 Sensing).
  • Light flickers or is dim: The battery may be low. Recharge the device.
  • Light does not charge: Ensure the USB cable is properly connected and the power source is working. Try a different cable or power adapter.

7. Specifications

FeatureSpecification
MaterialPlastics (Body Material: ABS)
Lighting SourceLED light
Lighting Color2700K~3000K Warm White Light (Adjustable to Cool White, Neutral White)
Lighting Power1W
Luminous Flux60-249 lm
LED Lighting Delay15 seconds (after motion stops)
Sensor Battery LifeApprox. 2 months (depending on usage)
Rated VoltageDC5V 1A (Voltage: ≤36v)
Battery Capacity500mAh Polymer Lithium Battery
Power SourceRechargeable battery
Product Size180mm x 25mm x 25mm
Sensing Range4 meters, 120-degree horizontal angle
CertificationCE, EMC, ROHS
Diagram showing the dimensions of the night light

Figure 6: Product dimensions.

8. User Tips

  • Optimal Sensor Placement: For best motion detection, place the light where the sensor has an unobstructed view of the area you wish to illuminate. Avoid placing it directly facing heat sources or air vents, which can cause false triggers.
  • Charging Frequency: Depending on usage, you may need to charge the light every few weeks. If used frequently in Always-On mode, more frequent charging will be required.
  • Versatile Use: Don't forget you can easily detach the light from its base to use it as a portable flashlight for quick trips to other rooms or during power outages.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or retailer from whom you purchased this product. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.