Shunmaii LY-0825

Contents

Shunmaii LY-0825 LED Bike Turn Signal Light User Manual

Lightweight Rechargeable Night Riding Direction Indicator with Wireless Remote Control

1. Introduction

Thank you for purchasing the Shunmaii LY-0825 LED Bike Turn Signal Light. This device is designed to enhance your safety during night riding by providing clear direction indication and visibility. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Package Contents

Please check the package for the following items:

  • 1 x Helmet Tail Lamp (Main Unit)
  • 1 x Wireless Remote Control
  • 1 x Micro USB Charging Cable (color may vary)
  • 1 x Remote Control Strap
  • 1 x English User Manual
Package contents of the Shunmaii LY-0825 LED Bike Turn Signal Light, showing the main light unit, remote control, USB cable, strap, and manual.
Figure 2.1: Included Components

3. Setup and Installation

3.1 Charging the Device

Before first use, fully charge the helmet tail lamp.

  1. Locate the Micro USB charging port on the helmet tail lamp.
  2. Connect the provided Micro USB cable to the lamp and the other end to a USB power source (e.g., computer, USB wall adapter).
  3. The charging indicator light will show the charging status (specific indicator behavior not detailed, typically red for charging, off/green for full).
  4. Charging time is approximately 1.5 to 2 hours.
Bicycle helmet tail lamp showing Micro USB charging method, 1.5-2H charging time, and 4-5H usage time. The image also displays the main unit and remote control.
Figure 3.1: Charging the Helmet Tail Lamp

3.2 Mounting the Tail Lamp

The tail lamp is designed for easy attachment to your helmet.

  1. Clean the desired mounting area on your helmet to ensure good adhesion.
  2. Remove the protective backing from the adhesive sticker on the back of the tail lamp.
  3. Carefully position the tail lamp on your helmet and press firmly to secure it.

3.3 Attaching the Remote Control

The remote control can be attached to your bicycle handlebars for easy access.

  1. Use the provided remote control strap to secure the remote to a convenient location on your handlebars.
  2. Ensure the remote is positioned where it can be easily reached without compromising steering control.

4. Operating Instructions

4.1 Powering On/Off

Press the power button on the helmet tail lamp to turn it on or off. The device will typically start in a default lighting mode.

4.2 Changing Light Modes

The helmet tail lamp features 6 different lighting modes, controllable via the wireless remote control:

  1. Red Light Always On: Constant red illumination for steady visibility.
  2. Red Light Breathing Flashing: Red light gently fades in and out.
  3. Red and Blue Light Flashing: Alternating red and blue flashes for enhanced attention.
  4. Left Turn Signal Lamp: Yellow arrow illuminates and flashes to indicate a left turn.
  5. Right Turn Signal Lamp: Yellow arrow illuminates and flashes to indicate a right turn.
  6. Double Flashing (Hazard): Both left and right yellow arrows illuminate and flash simultaneously.
Diagram showing the 6 light modes: red light always on, red light breathing flashing, red and blue light flashing, left turn signal lamp, right turn signal lamp, and double flashing.
Figure 4.1: Available Light Modes

4.3 Using the Wireless Remote Control

The remote control allows you to switch between light modes conveniently while riding.

  • Press the corresponding buttons on the remote to activate the desired light mode (e.g., left arrow for left turn, right arrow for right turn, central button for other modes).
  • Ensure the remote control has a clear line of sight or is within effective range of the tail lamp for reliable operation.
Cyclist wearing a helmet with the LED bike turn signal light active, showing its visibility from behind in a dark environment.
Figure 4.2: Device in Use

5. Maintenance

5.1 Cleaning

  • Wipe the device with a soft, damp cloth.
  • Do not use abrasive cleaners or solvents, as they may damage the surface.

5.2 Storage

  • Store the device in a cool, dry place when not in use.
  • If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.

5.3 Water Resistance

The device is designed to be water-resistant for outdoor use. However, avoid submerging it in water or exposing it to heavy downpours for prolonged periods.

Helmet with the turn signal light attached, showing water droplets on the surface, indicating water resistance.
Figure 5.1: Water Resistance

6. Troubleshooting

  • Device not turning on: Ensure the device is fully charged.
  • Remote control not working: Check if the remote control's battery needs replacement (if applicable, or if it's a rechargeable remote, ensure it's charged). Ensure there are no obstructions between the remote and the tail lamp.
  • Lights dim or inconsistent: Recharge the device.

7. Specifications

FeatureSpecification
Model NumberLY-0825
Main MaterialABS + Rubber
Product Color OptionsRed, Blue, Black
Product Size (Lamp)Approx. 142 x 35 x 20 mm (5.59 x 1.37 x 0.78 inches)
Net WeightApprox. 30g
Lamp BeadsSMD + COB LED
Light Modes6 (Red On, Red Breathing, Red/Blue Flashing, Left Turn, Right Turn, Double Flashing)
Control ModeSwitch + Wireless Remote Control
Power SupplyBuilt-in 300mAh Lithium Polymer Battery
Charging MethodMicro USB Charging
Charging Time1.5 - 2 Hours
Usage Time4 - 5 Hours
Waterproof LevelNot specified, but water-resistant for outdoor use
Diagram showing the dimensions of the main light unit (142mm length, 35mm height) and the remote control (65mm height, 42mm width). Also displays the USB cable, strap, and a small instruction diagram.
Figure 7.1: Product Dimensions and Components
Illustration of the 300mAh built-in polymer battery, highlighting its long endurance.
Figure 7.2: Battery Capacity

8. User Tips

No specific user tips were available from reviews or Q&A for this product.

9. Warranty and Support

For any issues, inquiries, or assistance, please contact the seller directly through your purchase platform. Please refer to your purchase details for specific warranty information, if any.

© 2024 Shunmaii. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.