1. Introduction
Thank you for purchasing the HamGeek USRP B200mini-i Software-Defined Radio. This manual provides essential information for the safe and effective use of your device, including setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the product and keep it for future reference.
For detailed technical specifications, specific model manuals, or software, please contact HamGeek support via AliExpress internal message or email: wishcolor@126.com.
2. Safety Warnings
Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.
2.1 Electrical Safety
- Use only the power adapter provided with the product or a compliant 5V DC power supply.
- Do not use the device in humid environments unless the product specifically states a waterproof rating.
- If the power cord is damaged, do not continue to use it. Contact support immediately for a replacement.
- Always disconnect the power before cleaning the device.
2.2 Usage Environment
- Operating temperature range: -10°C to 40°C (subject to model specifications).
- Avoid direct sunlight, high temperatures, and dusty environments.
- Ensure good ventilation and do not block the heat dissipation holes on the device.
2.3 Operational Safety
- Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
- Prevent liquid from entering the product interior.
- If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact after-sales service.
3. Setup
3.1 Package Contents
Carefully unpack the box and ensure all items are present and in good condition:
- HamGeek USRP B200mini-i motherboard with heatsink and protective case (pre-assembled) x 1
- TQTT rubber antenna x 3
- Micro-USB 3.0 data cable x 1
- RF cable (female-female connector) x 3
If any items are missing or damaged, please contact HamGeek support immediately.
Figure 1: HamGeek USRP B200mini-i and included accessories.
3.2 Product Overview
The HamGeek USRP B200mini-i is a compact SDR device. Familiarize yourself with its ports and indicators:
Figure 2: Front panel of the HamGeek USRP B200mini-i.
- PWR: Power indicator LED.
- USB3: USB 3.0 port for data and power connection.
- TRX: Transmit/Receive antenna port.
- RX2: Receive 2 antenna port.
- REF: Reference clock input/output port.
- LOCK: PLL Lock indicator LED.
- FPGA: FPGA status indicator LED.
3.3 First Use and Connection
- Power Supply Check: The device is bus-powered via USB 3.0. Ensure your computer's USB 3.0 port can provide sufficient power.
- Connect Antennas: Attach the provided TQTT rubber antennas or other suitable RF antennas to the TRX, RX2, and REF ports as required for your application.
- Connect to Computer: Use the provided Micro-USB 3.0 data cable to connect the USRP B200mini-i to a USB 3.0 port on your computer.
- Driver Installation: Follow the instructions provided with your SDR software suite (e.g., UHD drivers for USRP devices) to install necessary drivers on your operating system.
4. Operating Instructions
4.1 Basic Operations
- Power On/Off: The device powers on automatically when connected to a powered USB 3.0 port. Disconnect the USB cable to power off.
- Status Indicators: Observe the PWR, LOCK, and FPGA LEDs for device status. PWR indicates power, LOCK indicates PLL lock, and FPGA indicates FPGA operational status.
4.2 Software Usage
The HamGeek USRP B200mini-i is designed for use with various SDR software applications:
- UHD (USRP Hardware Driver): This is the primary driver and API for USRP devices. Install UHD to enable communication between your software and the B200mini-i.
- GNU Radio: A powerful open-source toolkit for signal processing. The B200mini-i is fully compatible with GNU Radio, allowing for rapid prototyping and development of SDR applications.
- OpenBTS: For GSM base station prototyping, the B200mini-i can be used with OpenBTS.
- Other SDR Software: The device may be compatible with other SDR applications that support USRP hardware. Refer to the specific software documentation for compatibility and setup instructions.
Detailed instructions for software installation and usage are typically provided by the respective software projects.
5. Maintenance and Care
5.1 Cleaning
- Wipe the outer casing with a soft, dry cloth.
- Do not use chemical solvents, abrasive cleaners, or strong detergents, as these may damage the device's finish or internal components.
5.2 Storage
- When not in use for an extended period, clean the device and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the device in its original packaging or a protective case to prevent dust accumulation and physical damage.
6. Troubleshooting
If you encounter issues with your HamGeek USRP B200mini-i, refer to the table below for common problems and solutions:
| Problem | Possible Reasons | Solution |
|---|---|---|
| Device does not power on | USB 3.0 cable not properly connected or port not providing sufficient power. | Check USB 3.0 connection. Try a different USB 3.0 port or computer. Ensure the port is active and providing power. |
| Software does not detect device | Drivers not installed or corrupted. Device not properly initialized. | Ensure UHD drivers are correctly installed. Restart your computer. Reconnect the device. Check device manager for any driver issues. |
| Poor RF performance / No signal | Antennas not connected or incorrect type. Software configuration errors. | Verify antennas are securely connected to the correct ports (TRX, RX2). Check software settings for frequency, gain, and antenna selection. |
| Device becomes unresponsive | Software crash or temporary hardware glitch. | Disconnect and reconnect the USB cable. Restart the SDR software. |
For other faults or persistent issues, please contact HamGeek technical support.
7. Specifications
| Category | Parameter |
|---|---|
| General |
|
| Conversion Module |
|
| Single Channel RF Performance |
|
| Physical |
|
Figure 3: HamGeek USRP B200mini-i dimensions.
8. User Tips
To maximize your experience with the HamGeek USRP B200mini-i:
- USB 3.0 Quality: Use a high-quality USB 3.0 cable and ensure your computer's USB 3.0 port is fully compliant to avoid data transfer issues or power drops.
- Antenna Matching: Always use antennas appropriate for the frequency range you are operating in to ensure optimal performance and prevent damage.
- Software Updates: Regularly check for updates to UHD drivers and your preferred SDR software (e.g., GNU Radio) to benefit from performance improvements and bug fixes.
- Cooling: While the device includes a heatsink, ensure it's operated in a well-ventilated area, especially during prolonged high-bandwidth operations, to maintain optimal temperature.
9. Warranty and Support
9.1 Warranty Policy
The HamGeek USRP B200mini-i comes with a warranty of 12 to 24 months from the date of purchase. Please refer to the store's announcement or your purchase details for the exact warranty period applicable to your product.
9.2 Technical Support
For detailed technical documentation, calibration certificates, hard copies of the manual, or any other support inquiries, please contact us:
- Via AliExpress: Send a message through the AliExpress platform to HamGeek Store.
- Via Email: You can also reach us at wishcolor@126.com.
We aim to respond to inquiries within 24 working hours.
10. Compliance Information
10.1 CE Declaration of Conformity
This product complies with the essential requirements of the following EU directives:
- Low Voltage Directive (LVD) 2014/35/EU
- Electromagnetic Compatibility Directive (EMC) 2014/30/EU
- RoHS Directive 2011/65/EU
10.2 WEEE Disposal
The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste. It must be collected and recycled separately to prevent potential harm to the environment and human health from uncontrolled waste disposal.
11. Disclaimer
This instruction manual is a general version. The actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice for product improvement.
A PDF version of this user manual is available for download from the product page or by contacting support.