UBARO UB-ZN146-W05

Contents

UBARO 6 Gang WiFi Smart Touch Switch User Manual

Model: UB-ZN146-W05

1. Introduction

Thank you for choosing the UBARO 6 Gang WiFi Smart Touch Switch. This intelligent switch allows you to control your lighting with touch, a smartphone app, or voice commands, enhancing your home automation experience. Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Safety Information

  • WARNING: Always turn off power at the circuit breaker before installing or servicing the switch. Failure to do so may result in serious injury or death.
  • Installation should be performed by a qualified electrician or a person with sufficient knowledge of electricity.
  • Do not exceed the maximum load ratings specified in the specifications section.
  • Ensure the switch is installed in a dry environment, away from water or excessive humidity.
  • Do not attempt to repair or modify the switch yourself. Contact support if issues arise.

3. Product Overview

The UBARO 6 Gang WiFi Smart Touch Switch features a sleek tempered glass panel with individual touch buttons for each gang and a master control button. It integrates with Tuya/Smart Life app for advanced control.

3.1 Components

  • Touch Panel: Tempered glass surface with capacitive touch buttons.
  • Individual Gang Buttons: Control specific light circuits (L1 to L6).
  • Master Switch Button: Controls all connected lights simultaneously.
  • LED Indicators: Show the status of each gang and Wi-Fi connectivity.
  • Wiring Terminals: For Live (L), Neutral (N), and Load (L1-L6) connections.
UBARO 6 Gang Smart Switch Front View
Figure 1: Front view of the UBARO 6 Gang Smart Touch Switch (White Panel)

4. Setup and Installation

4.1 Physical Installation

  1. Turn off Power: Before starting, ensure the main power supply to the circuit is turned off at the circuit breaker.
  2. Separate Switch Parts: Use a screwdriver to gently pry apart the upper glass panel from the lower wiring module.
  3. Prepare Wall Box: Ensure your wall mounting box is a standard 120mm type with a minimum depth of 35mm.
  4. Wiring: Connect the wires according to the appropriate wiring diagram below.
  5. Mount Lower Part: Place the lower wiring module into the wall box and secure it with the two side screws.
  6. Attach Glass Panel: Align the upper glass panel with the lower module and snap it into place, starting from the top.
  7. Restore Power: Turn the main power supply back on at the circuit breaker. The LED indicator on the switch should flash quickly, indicating it's ready for pairing.

4.2 Wiring Diagrams

There are two main wiring configurations: with a neutral wire or without a neutral wire. Please identify your home's wiring setup before proceeding.

UBARO Smart Switch Wiring Diagram
Figure 2: Standard Wiring Diagram for UBARO Smart Switch. Connect Live (L), Neutral (N), and individual Load lines (L1-L6) to their respective terminals.

4.2.1 Wiring Without Neutral Wire (Capacitor Required)

  • 1: Neutral wire (for capacitor connection).
  • 2: Live wire.
  • 3: Capacitor (must be connected between L1 and the Neutral wire of the light fixture).
  • 4,5,6,7: Lighting wires (L1, L2, L3, L4, L5, L6) connected to their respective terminals and to the light fixtures.

4.2.2 Wiring With Neutral Wire

  • 1: Neutral wire (connected to the 'N' terminal on the switch).
  • 2: Live wire (connected to the 'L' terminal on the switch).
  • 3,4,5,6: Lighting wires (L1, L2, L3, L4, L5, L6) connected to their respective terminals and to the light fixtures.

4.3 App Download and Registration

  1. Download App: Scan the QR code provided in the quick start guide or search for

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.