1. Introduction
This manual provides essential information for the safe and effective installation and use of your KUNGKIC 9PCS White LED Interior Light and Reverse Bulbs Kit. This kit is designed to upgrade the lighting in your Subaru BRZ or Toyota GR86 (models 2021-2024) with bright, energy-efficient LED bulbs for various applications including interior reading lamps, trunk lights, vanity mirror lamps, door lights, and reverse lamps.
2. Safety & Warnings
Important Safety Information:
- Read all instructions thoroughly before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord (if any) out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines carefully to avoid injury.
3. Package Contents
Your KUNGKIC LED lighting kit includes 9 pieces of white LED bulbs designed for specific locations in your vehicle. Please verify all components are present and undamaged upon receipt.
Figure 1: Included LED Bulb Types
- 2x Reversing Lamps
- 2x Vanity Mirror Lamps
- 5x Bulbs for Trunk Light, Reading Lamp, and Door Lights
Figure 2: Product Display - All 9 LED Bulbs
4. Specifications
| Attribute | Detail |
|---|---|
| Brand | KUNGKIC (Item Brand: AIRSPEED) |
| Item Type | Automobile Lighting Bulb (Trunk Lamp, Reading Lamp, Reverse Lamp, Vanity Mirror Lamp, Door Light) |
| Adaptable Model | For SUBARU BRZ GR86 (2021-2024) |
| Use | Decoration / Illumination |
| Installation Method | Replacement Installation |
| Quantity | 9 pieces |
| Voltage | 12 V / 24 V |
| Origin | Mainland China |
| High-concerned chemical | None |
5. Installation
These LED bulbs are designed for direct replacement of your vehicle's standard bulbs and typically require no modifications. Ensure your vehicle's ignition is off and the relevant light circuit is de-energized before beginning installation.
For detailed, step-by-step visual guidance, please refer to the installation video tutorial, which may be available on the product's original purchase page or the manufacturer's website.
Installation Overview:
- Locate the existing bulb you wish to replace (e.g., reversing lamp, trunk light, reading lamp, vanity mirror lamp, or door light).
- Carefully remove the old bulb from its socket.
- Insert the corresponding new LED bulb into the socket. Ensure correct polarity; if the LED does not light up, remove it, rotate 180 degrees, and reinsert.
- Test the light function before reassembling any covers or panels.
Figure 3: Reversing Lamp - Before and After LED Installation
Figure 4: Reversing Lamp Close-up - Before and After LED Installation
Figure 5: Door Light Effect
Figure 6: Interior Reading Lamp Illumination
Figure 7: Vanity Mirror and Trunk Light Illumination
6. Operating Instructions
Once installed, the LED bulbs will operate in conjunction with your vehicle's existing lighting controls. Simply use your car's switches for interior lights, trunk lights, or engage reverse gear for the reverse lamps, as you normally would.
7. Maintenance
- Keep the LED bulbs and surrounding areas clean from dust and debris.
- Avoid using harsh chemicals or abrasive materials for cleaning, as this may damage the bulb's surface.
- Periodically check the bulbs for any signs of damage or loose connections.
8. Troubleshooting
Light does not turn on:
- Ensure the bulb is correctly seated in the socket.
- Check the polarity: LED bulbs are polarity sensitive. If the bulb does not light up, remove it, rotate it 180 degrees, and reinsert it.
- Verify that the vehicle's light switch is in the 'on' position and the circuit is receiving power.
- Inspect the bulb for any visible damage. If damaged, replace the bulb.
- Check the vehicle's fuse box for any blown fuses related to the lighting circuit.
9. User Tips
- When installing, handle the LED bulbs by their base to avoid touching the LED chips directly, which can transfer oils and reduce lifespan.
- Always double-check the fitment for each specific light location in your vehicle to ensure you are using the correct bulb type from the kit.
10. Warranty & Support
For product support, warranty claims, or further inquiries, please contact the manufacturer or their authorized representative:
Manufacturer Information:
Manufacturer: Guangzhoushi jinguojimaoyi Co., Ltd.
Address: Room 209, No. 3, Shipai East Street, Beiping, Kemulang, Tianhe District, Guangzhou, CN-Tianhequ
Email/Tel: gzshijina@163.com
EU Authorized Representative:
Representative: eVatmaster Consulting GmbH
Address: DE-Bettinastr. 30, 60325 Frankfurt am Main, Germany
E-mail: contact@evatmaster.com
Tel: +0049-6995179070
Importer: None specified
11. Compliance Information
This product bears the CE mark, indicating conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
NOTE: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.