MESTEK IR02 Series

Contents

MESTEK IR02 Series Infrared Thermometer User Manual

Model: IR02 Series

Brand: MESTEK

1. Introduction

The MESTEK IR02 Series Infrared Thermometer is a versatile non-contact temperature measuring device designed for various applications, from industrial use to kitchen cooking. It offers rapid and accurate temperature readings, along with features like adjustable emissivity, unit switching, and high/low temperature alarms. This manual provides essential instructions for safe and effective use of your device.

For additional details and visual guides, please refer to the official user manual PDF: View User Manual (PDF)

2. Safety Precautions

  • Avoid using the device in strong light or high-temperature environments to prevent damage and ensure accurate readings.
  • Keep the infrared probe clean and free from dust or debris. Do not allow the probe to contact liquids.
  • Do not look directly into the laser beam.
  • This device is not intended for medical use.

3. Setup and Battery Installation

The MESTEK IR02 Series thermometer requires 1.5V AAA batteries (not included) for operation.

  1. Open the battery compartment, typically located on the handle of the device.
  2. Insert 2 AAA batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment securely.
Battery installation and quick measurement steps
Figure 3.1: Battery installation is the first step in quick measurement.

4. Operating Instructions

4.1 Basic Temperature Measurement

  1. Turn on the power by pulling the trigger.
  2. Aim the thermometer at the surface of the object you wish to measure. The laser pointer (if available on your model) will help identify the target area.
  3. Press and hold the measurement button (trigger) to initiate measurement.
  4. Wait for the reading to stabilize on the display.
  5. Release the trigger to hold the data on the screen.
Infrared thermometer measuring ambient temperature compared to a room thermometer
Figure 4.1: Non-contact ambient temperature measurement with the infrared thermometer.
Video 4.1: Demonstration of the 12-point laser measurement feature.

4.2 Unit Switching (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), press the dedicated °C/°F button or the 'MODE' button until the desired unit is displayed. This can be done anytime and anywhere with a single click.

Infrared thermometer display showing Celsius and Fahrenheit unit switching
Figure 4.2: Switching between Celsius and Fahrenheit temperature units.

4.3 Emissivity Adjustment

The emissivity (ε) setting is crucial for accurate temperature measurement of different materials. The IR02 series allows for adjustable emissivity from 0.1 to 1.0. The default emissivity is 0.95.

Adjust the emissivity according to the material surface being measured. Refer to the Emissivity Comparison Table below for common materials.

Infrared thermometer display showing emissivity setting and an emissivity comparison table
Figure 4.3: Emissivity adjustment and comparison table for various materials.

4.4 High and Low Temperature Alarm

The device features red, green, and yellow LED alarm lights to indicate high or low temperature conditions, with a measurement range of -50°C to 800°C.

Infrared thermometer showing high and low temperature alarm indicators
Figure 4.4: Visual indication of high and low temperature alarms.

4.5 Data Retention (HOLD)

The device automatically retains the measured data on the screen after releasing the trigger, allowing for easy recording.

4.6 K-Type Temperature Measurement (IR02C Model)

The IR02C model supports K-Type temperature probe measurement, expanding its versatility for contact temperature readings. The measurement range for K-Type is -10°C to 500°C (14°F to 932°F) with an accuracy of ±(1.5% + 2°C/4°F).

IR02C model using a K-Type temperature probe for liquid measurement
Figure 4.5: K-Type temperature measurement capability of the IR02C model.

5. Maintenance

  • **Cleaning the Lens:** Gently clean the infrared lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • **Cleaning the Casing:** Wipe the device casing with a damp cloth.
  • **Storage:** Store the thermometer in a dry, cool place, away from direct sunlight and extreme temperatures.
  • **Battery Replacement:** Replace batteries when the low battery indicator appears on the display.

6. Troubleshooting

Unit fails to power on:
Check whether the batteries are properly installed and have sufficient charge. Replace if necessary.
Inaccurate readings:
  • Ensure the lens is clean and free from obstructions.
  • Verify the emissivity setting is appropriate for the material being measured.
  • Ensure the distance-to-spot ratio (D:S) is maintained for accurate measurement (12:1 ratio).
  • Avoid strong light or high-temperature environments that might interfere with readings.
Display issues (e.g., dim, flickering):
Check battery level and replace if low. Ensure the device is not exposed to extreme temperatures.

7. Specifications

7.1 General Specifications

Feature Description
Brand Name MESTEK
Theory Thermometer Hygrometer
Style Handheld
Display Type DIGITAL (Color HD Display)
Display Size 1.9 Inches & Under
Power Type AAA Battery (2x 1.5V)
Is Smart Device No
Use Industrial
Origin Mainland China
Automatic Shut-down 30 seconds
Operating Temperature 0~50°C
Storage Temperature -10°C~60°C
Size 150*103*33mm

7.2 Model-Specific Specifications (IR02C)

Feature IR02C
Range -50~800°C
Color screen ✓
Temperature probe ✓ (K-Type)
Ambient temperature ✓ (-10~60°C)
Environment humidity ✓ (0-100%RH)
Mildew ✓
Dew point ✓
Measurement accuracy ±2°C
Temperature difference alarm ✓
Resolution 0.1°C
Emissivity 0.1~1 Adjustable
HD backlight ✓
Data retention ✓
Object distance ratio (D:S) 12:1
Response time <0.5S
Response wavelength 8-14um
Detailed specifications table for the IR02C model
Figure 7.1: Detailed specifications for the IR02C model.

8. User Tips

  • For best accuracy, ensure the target object fills the measurement spot indicated by the laser.
  • When measuring reflective surfaces, consider applying a non-reflective tape or paint to the area for a more accurate reading, or adjust emissivity accordingly.
  • Allow the thermometer to stabilize to ambient temperature if moving between significantly different temperature environments.
  • Keep the thermometer at a safe distance from hot surfaces while measuring.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your seller or refer to the product packaging for specific details. Keep your purchase receipt as proof of purchase.

© 2024 MESTEK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.