Voktta LTD-100

Contents

Voktta LTD-100 Inductance Tester User Manual

Model: LTD-100 | Brand: Voktta

1. Introduction

The Voktta LTD-100 Inductance Tester is a compact and efficient tool designed for quick fault checking of inductors on electronic motherboards, including those found in mobile phones and computers. Utilizing electromagnetic induction, this high-precision tester allows for rapid troubleshooting and precise localization of problematic coil areas, enhancing repair and inspection efficiency.

2. Package Contents

  • LTD-100 Inductance Tester × 1

3. Product Overview

The LTD-100 features a user-friendly design with essential components for effective inductor testing.

LTD-100 Inductance Tester with labeled components

Figure 1: Top and Bottom View of the LTD-100 Inductance Tester with Labeled Components

3.1 Components

  • Type-C Port: For power supply (USB charging).
  • Power Switch: A button to activate the tester.
  • Fault Indicator Light: A green LED that indicates the status of the inductor.
  • Sensor Probe: The end used to detect the inductor.

3.2 Key Features

  • Precise Electromagnetic Induction Localization: Simple operation for direct detection of inductor faults, enabling rapid troubleshooting.
  • Plug-and-Play, Simple, and Portable: One-button testing with simple and convenient operation, improving repair and testing efficiency.
  • Green LED Indicates Fault Status: The green light illuminates when the inductor is functioning normally; it turns off when an abnormality is detected, reducing misdiagnosis.
  • High-Precision Tester: Professional-grade detection technology ensures accurate and reliable repairs for mobile phones and computer motherboards.
  • One-Button Fault Source Lockdown: Long-press to trigger rapid detection and quickly pinpoint the problematic area of the coil.

4. Setup

The LTD-100 Inductance Tester is designed for ease of use. Follow these steps to prepare the device for testing:

  1. Connect Power: Insert a Type-C charging cable into the Type-C port of the LTD-100 tester. Connect the other end of the cable to a USB power source (e.g., a charger, computer USB port).
LTD-100 Inductance Tester connected to a Type-C cable

Figure 2: LTD-100 Tester Connected to Power

5. Operating Instructions

To test an inductor on an electronic motherboard, follow these steps carefully:

  1. Power On Both Devices: Ensure that both the LTD-100 Inductance Tester (connected to power) and the electronic motherboard you intend to test are powered on. This is crucial for accurate readings.
  2. Activate Tester: Press the power button on the LTD-100 tester.
  3. Position Sensor: Gently place the sensor probe of the LTD-100 tester near the inductor you wish to test on the motherboard.
  4. Observe Indicator Light:
    • If the green indicator light on the tester turns on, it signifies that the inductor is functioning normally and is not damaged.
    • Green light indicating normal inductor function

      Figure 3: Green Light On - Inductor Functioning Normally

    • If the green indicator light does not turn on, it indicates that the inductor is malfunctioning or damaged.
    • No green light indicating a fault condition

      Figure 4: No Green Light - Inductor Malfunctioning

  5. Pinpoint Fault Source (Optional): For quick fault source lockdown, press and hold the power button to trigger a rapid scan and pinpoint the problematic area in the coil.

5.1 Product Demonstration Video

Video 1: Demonstration of LTD-100 Inductance Tester in use.

6. Maintenance

To ensure the longevity and optimal performance of your LTD-100 Inductance Tester, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents, as they may damage the surface or internal components.
  • Storage: Store the tester in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
  • Moisture: Keep the device away from water and other liquids to prevent damage to electronic circuits.

7. Troubleshooting

If you encounter issues while using your LTD-100 Inductance Tester, please refer to the following common problems and solutions:

  • Device Does Not Power On:
    • Ensure the Type-C cable is securely connected to both the tester and the power source.
    • Verify that the USB power source is functional.
  • Indicator Light Does Not Respond During Test:
    • Confirm that both the LTD-100 tester and the motherboard being tested are powered on. The tester requires the inductor to be active to detect its status.
    • Ensure the sensor probe is in close proximity to the inductor.
  • Inconsistent Readings:
    • Ensure there are no other strong electromagnetic fields nearby that could interfere with the tester.
    • Re-position the sensor probe directly over the inductor.

8. Specifications

Product Specifications

Figure 5: Product Specifications Overview

FeatureDetail
Product NameRechargeable Inductance Tester
ModelLTD-100
Power SupplyUSB Charging
InterfaceType-C Port
OperationPress and hold button to use
Length60 mm (2.39 in)
Width25 mm (0.98 in)
Dimensions of LTD-100 Inductance Tester

Figure 6: Dimensions of the LTD-100 Inductance Tester

9. Warranty and Support

For any questions, technical support, or warranty inquiries regarding your Voktta LTD-100 Inductance Tester, please contact the seller or the official Voktta support channel. Please retain your proof of purchase for warranty claims.

© 2023 Voktta. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.