GGBEE Montion Sensor Cabinet Light

Contents

GGBEE Motion Sensor LED Cabinet Lamp User Manual

Model: Montion Sensor Cabinet Light

1. Introduction

Thank you for purchasing the GGBEE Motion Sensor LED Cabinet Lamp. This versatile and energy-efficient light is designed to provide convenient illumination in various areas of your home. Featuring motion sensing, stepless dimming, and easy magnetic installation, it's perfect for cabinets, wardrobes, hallways, and more.

GGBEE Motion Sensor LED Cabinet Lamp

Figure 1: GGBEE Motion Sensor LED Cabinet Lamp

2. Safety Instructions

  • Do not install the lamp in humid environments, extremely bright rooms, or areas with very low or high temperatures to ensure proper function.
  • This product is designed for indoor use only.
  • Use only a 5V power source for charging.
  • Do not attempt to disassemble or modify the lamp, as this may void the warranty and cause damage.
  • Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • Motion Sensor LED Cabinet Lamp
  • USB Charging Cable (Type-C)
  • Metal Patches with Adhesive (for non-ferrous surfaces)
  • User Manual

4. Parts Overview

Diagram of lamp function buttons

Figure 2: Lamp Function Buttons and Ports

  1. Time Delay Switch: Adjusts auto-off time (20s, 30s, 60s).
  2. Human Body Sensor (PIR Sensor): Detects motion.
  3. Charging Indicator: Shows charging status (Red: charging, Green: fully charged).
  4. Type-C Charging Port: For connecting the USB charging cable.
  5. On/Off/Auto Mode Switch: Selects operating mode.
  6. Brightness/Light Control Key: Adjusts brightness and changes color temperature.

5. Setup and Installation

5.1. Charging the Lamp

Before first use, fully charge the lamp. Connect the provided Type-C USB cable to the lamp's charging port and the other end to a 5V USB power adapter (not included).

USB charging port

Figure 3: USB Charging

  • The charging indicator will glow red while charging.
  • The indicator will turn green when the lamp is fully charged (approximately 3 hours).
  • Charge the battery when the light appears dim.

5.2. Installation

The lamp offers two installation methods:

Method 1: Direct Magnetic Attachment (for ferrous surfaces)

The lamp has a built-in magnet. Simply attach the lamp directly to any iron or steel surface (e.g., metal shelves, refrigerators).

Method 2: Adhesive Metal Patch (for non-ferrous surfaces)

Easy installation steps

Figure 4: Installation on Non-Ferrous Surfaces

  1. Take one of the provided metal patches. Ensure the surface where you intend to install the lamp is clean, dry, and smooth.
  2. Peel off the protective film from one side of the metal patch and firmly press it onto the back of the lamp, aligning it with the built-in magnet.
  3. Peel off the protective film from the other side of the metal patch.
  4. Press the lamp (with the attached metal patch) firmly onto the desired clean surface for at least 3 seconds to ensure strong adhesion.
  5. The lamp can now be easily attached and detached from this metal patch.

6. Operating Instructions

6.1. Selecting Operating Mode

Use the On/Off/Auto Mode Switch:

  • OFF: Lamp is turned off.
  • ON: Lamp stays constantly on (constant light mode).
  • AUTO: Lamp operates in automatic motion-sensing mode.

6.2. Day/Night Mode (in AUTO mode)

When the lamp is in AUTO mode, you can toggle between day and night sensing:

  • Day Mode: Click the Brightness/Light Control Key once. The lamp will flash once. In this mode, the lamp will turn on automatically when motion is detected, regardless of ambient light.
  • Night Mode: Click the Brightness/Light Control Key twice. The lamp will flash twice. In this mode, the lamp will only turn on automatically when motion is detected in a dim or dark environment.

6.3. Adjusting Brightness (Stepless Dimming)

When the lamp is in ON (constant light) mode:

  • Long press the Brightness/Light Control Key to adjust the brightness from 10% to 100%. Release the button when the desired brightness is reached.
Infinite dimming feature

Figure 5: Stepless Dimming

6.4. Changing Color Temperature (3-Color Version)

When the lamp is in ON (constant light) mode:

  • Click the Brightness/Light Control Key to cycle through color temperatures: 3000K (Warm Light), 4000K (Neutral Natural Light), and 6000K (Cool White Light).
Three dimming levels

Figure 6: Available Color Temperatures

6.5. Motion Sensing Function (in AUTO mode)

Automatic light activation within 3 meters

Figure 7: Motion Sensing Range

  • The human body sensor (PIR sensor) detects motion within a range of 0-3 meters and an angle of 120°.
  • When motion is detected within this range, the lamp will automatically turn on.
  • Use the Time Delay Switch to select how long the lamp stays on after motion is no longer detected: 20 seconds, 30 seconds, or 60 seconds. After the selected time, the lamp will automatically turn off.

6.6. Product Demonstration Video

Video 1: Product features and demonstration

7. Maintenance

  • Cleaning: Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lamp when the light starts to dim.
  • Storage: If storing the lamp for an extended period, charge it fully before storage and recharge it every 3-6 months to maintain battery health.

8. Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on automatically.1. Not in AUTO mode.
2. Insufficient ambient darkness (in Night Mode).
3. Battery is low.
4. Motion sensor obstructed or out of range.
1. Switch to AUTO mode.
2. Ensure the environment is dark enough for Night Mode, or switch to Day Mode.
3. Charge the lamp.
4. Ensure sensor is clear and within 3 meters of motion.
Lamp light is dim.1. Battery is low.
2. Brightness setting is low.
1. Charge the lamp.
2. In ON mode, long press the Brightness/Light Control Key to increase brightness.
Lamp does not charge.1. Faulty USB cable or adapter.
2. Charging port is damaged.
1. Try a different USB cable and 5V adapter.
2. Contact customer support if port is damaged.

9. Specifications

Product dimensions and basic information

Figure 8: Product Dimensions

FeatureDetail
Product NameMotion Sensor LED Cabinet Lamp (Small white square night light)
Model NumberMontion Sensor Cabinet Light
MaterialABS, PVC
Dimensions80mm x 80mm x 17.5mm
Power InputDC 5V / 0.5A
Max Power0.5W
Battery Capacity600mAh
Charging TimeApprox. 3 hours
Luminous Flux249-2000 (Stepless Dimming)
Color Temperature3000K / 4000K / 6000K (selectable)
Motion Sensor Range0-3 meters, 120° angle
Auto-Off Delay20s / 30s / 60s (selectable)
CertificationsRoHS, FCC, EMC, CE
Installation MethodSelf-contained (Magnetic)
Smart DeviceNo

10. User Tips

  • For optimal motion sensing performance, ensure the sensor is not obstructed and is placed where movement is expected.
  • If using in a wardrobe or cabinet, consider placing the lamp near the opening for immediate activation.
  • Experiment with the different color temperatures to find the most comfortable lighting for your specific environment.
  • Remember that in Night Mode, the lamp will only activate in dark conditions, which is normal behavior and not a product fault.

11. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact the seller or retailer from whom you purchased this product. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.