Realme 67W Supervooc charger

Contents

Realme 67W SuperVOOC Fast Charging Adapter User Manual

Model: 67W Supervooc charger

Brand: Realme

Important Safety Information

Please read these safety instructions carefully before using the charger. Incorrect use may lead to fire, electric shock, equipment damage, or personal injury. Following all warnings and instructions can effectively ensure safety.

Safety Warnings

  • This charger is only suitable for EU regions (AC input 200-240V~50/60Hz, 1.8A). Do not use it in non-specified voltage environments to avoid circuit overload and danger.
  • For indoor use only. Keep away from water, humid environments (such as bathrooms, near kitchen sinks) and high-temperature areas (such as near heaters, ovens, direct sunlight) to prevent short circuits or insulation aging.
  • Do not disassemble, modify, or squeeze the charger. It contains high-voltage components. Unauthorized disassembly may lead to electric shock or equipment malfunction and will void the official warranty.
  • If the charger is damaged, overheats abnormally, emits strange odors, smokes, or experiences any other malfunction, immediately disconnect it from the power source and stop using it. Contact official Realme after-sales service for handling. Do not attempt to repair it yourself.
  • Keep the charger and charging cable away from children to prevent accidental insertion or biting of the cable, which could lead to electric shock or suffocation. Minors should use it under adult supervision.
  • Avoid covering the charger during charging to ensure proper heat dissipation. Disconnect from power when not in use. Store properly when idle for long periods, avoiding pressure, pulling, or bending of the cable.
  • Do not use this charger to charge non-compatible devices to avoid equipment damage and safety incidents due to power mismatch.
  • Tested for extreme environments, it can be used in areas up to 5000 meters above sea level, and its insulation performance meets safety standards. However, avoid using it in dusty or corrosive gas environments.

Product Overview

The Realme 67W EU Charger features an aerospace-grade Gallium Nitride (GaN) chip design, offering both compact portability and efficient fast charging. It supports the Realme SCP Super Fast Charging protocol, with a maximum output power of 67W. This charger intelligently adapts to the charging needs of various devices and incorporates eight layers of safety protection, balancing charging speed with user safety. It is compatible with Realme and mainstream brand mobile phones, tablets, and laptops, making it an ideal charging accessory for home, office, and travel.

Video: Overview of the Realme 67W SuperVOOC Charger and included cable.

Realme 67W SuperVOOC charger and Type-C cable

Image: The Realme 67W SuperVOOC charger and its accompanying Type-C cable.

Specifications

Item Specification
Product Name Realme 67W SuperVOOC Charger (EU Version)
Input Parameters AC 200-240V~50/60Hz, 1.8A
Output Parameters Supports 5V 3A, 9V 3A, 10V 4A Max, 11V 6A Max, 12V 3A, 15V 3A Max, 20V 3.25A Max. Actual output power intelligently adjusts based on device and scenario.
Fast Charge Protocols Compatible with SCP, PD3.0, FCP, QC4.0 and other mainstream fast charging protocols.
Interface Type 1A1C Dual Port Design (USB-A supports 67W Super Fast Charging, USB-C supports 65W PD Fast Charging)
Safety Protection Short circuit protection, overcurrent protection, overvoltage protection, undervoltage protection, overheating protection, electrostatic discharge (ESD) protection, electromagnetic field protection, lightning protection (8-fold protection).
Material Characteristics Flame-retardant casing, internal heat dissipation structure, intelligent temperature control chip to improve charging efficiency and safety.
Recommended Cable It is recommended to use the original 6.5A USB Type-C data cable to support high current transmission and ensure fast charging performance and safety.
Durability Test USB-C port plug/unplug test: 10,000 times; USB-A port plug/unplug test: 3,000 times; Cable 90-degree bend test: 5,000 times. Meets long-term use requirements.
Back of Realme 67W charger showing EU plug and input/output specifications

Image: Rear view of the charger, displaying the EU plug and detailed electrical specifications.

Realme 67W charger showing the USB-A output port

Image: Close-up of the charger's USB-A output port.

Setup

Charging Preparation

  1. Check Accessories: Confirm that the package includes the charger, the original 6.5A USB Type-C data cable (included in some versions), and the warranty card. Inspect the charger for any damage, loose ports, or the data cable for cracks or oxidized contacts.
  2. Clean Ports: Use a soft brush or cotton swab to gently wipe the charger's ports and the device's charging port to remove dust or foreign objects, preventing poor contact that could interrupt charging or cause abnormal heat.
  3. Confirm Environment: Choose a dry, well-ventilated, and normal temperature (0℃-35℃) environment. Keep away from high temperatures, humidity, and dusty areas to ensure proper heat dissipation during charging.

Operating Instructions

Charging Steps

  1. Connect Charger to Power: Firmly insert the charger's EU plug into a compatible EU standard power socket. Ensure a tight connection between the plug and the socket to prevent looseness.
  2. Connect Device to Charger: Insert one end of the original 6.5A data cable into the charger's USB-A or USB-C port, and the other end into the charging port of the device to be charged. Ensure the connection is secure.
  3. Confirm Charging Status: After a successful connection, the device screen will display a charging icon. If the device supports fast charging, the corresponding fast charging mode will be automatically triggered (e.g., Realme phones will display "Super Fast Charge" indicator). It is normal for the charger to experience slight heating.
  4. Dual-Port Charging: When charging with both ports simultaneously, the charger will intelligently distribute power. It supports 40W Max + 22.5W Max or 22.5W Max + 40W Max output. When using a single port, it can achieve a maximum of 67W fast charging.
  5. Stop Charging: After the device is fully charged, it is recommended to disconnect the data cable from the device promptly, then unplug the charger from the power source. For long-term storage, prioritize disconnecting the charger from the power source.

Fast Charge Compatibility

  • 67W Super Fast Charging: This is only applicable to Realme devices that support 11V6A charging specifications. It requires pairing with the original 6.5A data cable to achieve 30-minute fast charging (actual charging speed may vary depending on the device model).
  • Laptop Charging: The USB-C port supports up to 65W PD fast charging, compatible with mainstream thin and light laptops such as Realme MagicBook, Huawei MateBook, and MacBook.
  • Multi-Device Compatibility: Compatible with iPhone, Xiaomi, OPPO, vivo, Samsung, and other brand mobile phones and tablets. The charger intelligently adjusts the output power according to the device's supported charging protocol to ensure safe and efficient charging.
  • Low-Current Device Compatibility: Can charge low-current devices such as smartwatches, smart bands, and Bluetooth earphones. It intelligently matches low-power output to prevent damage to device batteries.

Maintenance

  • Cleaning and Care: Regularly wipe the surface and ports of the charger with a dry, soft cloth to remove dust. Do not use wet cloths, alcohol, or cleaning agents, as these can corrode the device.
  • Cable Protection: Avoid pulling, bending, or squeezing the charging cable. Do not wrap the cable tightly around the charger, as this can cause internal wire breakage, affecting charging performance or posing safety hazards. If the cable is damaged, replace it with an original cable promptly.
  • Storage: When not in use, store the charger and cable properly in a dry, cool place. Avoid direct sunlight, high temperatures, heavy pressure, or sharp objects to prevent damage to the casing.
  • Long-Term Storage: If the charger is not used for an extended period, it is recommended to connect it to power and charge it once every 3 months to prevent internal component aging and ensure device performance.

Troubleshooting

Common Problem Solution
Cannot trigger 67W Super Fast Charging
  1. Check if the device supports 11V6A fast charging specifications and Realme SCP protocol.
  2. Confirm using the original 6.5A data cable; try replacing the data cable.
  3. Check if the charger and device ports are securely connected; clean dust from the ports.
  4. If the device battery level is too high (e.g., over 80%), it may automatically switch to trickle charging, which is normal.
Charger overheats significantly
  1. Remove any coverings from the charger to ensure ventilation and heat dissipation.
  2. Avoid charging for long periods in high-temperature environments.
  3. Check if multiple high-power devices are being charged simultaneously; reduce the number of charging devices.
  4. If overheating is accompanied by strange odors or smoke, immediately stop use and contact after-sales service.
Charging interrupted or abnormally slow
  1. Check if the power socket is working correctly; try a different socket.
  2. Clean dust or foreign objects from the charger and device ports.
  3. Confirm the data cable is intact; try replacing it with an original data cable.
  4. Check if the device has power-saving mode enabled; disable it and try again.
  5. Extreme ambient temperatures (below 0℃ or above 35℃) can affect charging speed; adjust the ambient temperature.
Charger unresponsive after plugging into power
  1. Check if the power socket has power; try a different socket.
  2. Check if the charger plug is securely inserted.
  3. If the charger is damaged, has water ingress, or other issues, immediately stop use and contact after-sales service.
Insufficient power during dual-port charging

When charging with both ports simultaneously, the charger intelligently distributes power and cannot achieve 67W fast charging on both ports simultaneously. This is normal. If 67W fast charging is required for a single device, it is recommended to connect only one device for charging.

User Tips

  • Always use the original or certified compatible cables for optimal charging speed and safety.
  • Avoid using the charger in direct sunlight or extremely hot environments, as this can reduce its lifespan and efficiency.
  • If your device feels unusually hot during charging, disconnect it immediately and check for any issues with the cable or charger.
  • For best performance, ensure your device's software is up to date, as updates often include charging optimizations.

Warranty and Support

Warranty Policy

This charger enjoys Realme's official standard warranty service. Within 12 months from the date of purchase, if any non-human caused malfunctions occur under normal use, you can contact Realme's official after-sales service with your purchase receipt and product serial number for free repair or replacement.

Disclaimer

Equipment failures caused by human damage (such as disassembly, modification, dropping, water ingress, squeezing), use of non-original accessories, use in non-specified voltage environments, or force majeure (such as earthquakes, lightning strikes, fires) are not covered by the warranty. Realme official may provide paid repair services for such cases.

After-Sales Contact Information

You can check local after-sales service points and contact information on the Realme official website (https://www.honor.com/global/) or call the Realme official customer service hotline for technical support and after-sales service.

The copyright of this user manual belongs to Realme Terminal Co., Ltd. Without permission, no one may copy, disseminate, or modify the content of this manual. Product parameters and functions may be adjusted due to software version updates; the final product and official description shall prevail.

Realme Terminal Co., Ltd. All Rights Reserved.

EU Compliance Certification: Complies with relevant EU electrical safety standards and is suitable for use in EU regions.

(Note: Some content in this document may be AI-generated)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.