1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Leeocar Wireless CarPlay Android Auto Car Radio. This unit is designed to enhance your driving experience with advanced multimedia and navigation features.
1.1. Compatibility
This car video player is compatible with the following BMW 3 Series models:
- BMW 3 Series 328i, 335i, 325i (E90/E91/E92/E93) 2005 - 2011
- BMW E90 Sedan (2005-2012)
- BMW E91 Touring (2005-2012)
- BMW E92 Coupe (2006-2013)
- BMW E93 Convertible (2007-2013)
- BMW (E90 / E92 / E93) M3 (2007-2012)
1.2. Important Compatibility Notes
- If your car has a premium sound system (e.g., J.B.L or B.O.S.E) or a factory navigation system, this radio is not supported.
- Direct installation is possible if your original car radio plug has 8 speaker wires. If not, the radio does not support your car.
- The original A/C control panel must be relocated to the original storage box location. The package includes two bezels for this conversion.
- If your car has an iDrive system and LCD display, it is not compatible with this radio.
- If you wish to retain original buttons, an ashtray button relocation kit (not included) is required.
- Always verify the wiring harness port matches your original car's before purchase.
2. What's Included in the Package
Please verify all items are present in your package. If any accessories are missing, contact customer service.
The package typically includes:
- Main Head Unit (9-inch screen)
- Backup Camera Video Input Cable *1
- USB Adapter Cable *1 (6-pin)
- USB Adapter Cable *1 (4-pin)
- Audio Adapter Cable *1
- Audio Video Adapter Cable *1
- GPS Antenna *1
- CAN Bus *1
- Power Cable *1
- Radio Antenna Adapter Cable *1
- 15A Fuse *1
- Manual Air Conditioning Bracket *1
- Automatic Air Conditioning Bracket *1
- Mounting Bracket *1
- Screw Cap *2
- Clip *2
- Mounting Bracket *2
- Screw *12
- User Manual *1 (PDF version available online)
3. Setup
3.1. Pre-Installation Warnings
WARNING: Do not connect wiring while power is on. Doing so may result in system errors, fuse damage, or permanent malfunction. Always disconnect the battery before installation.
Disconnect the car battery before you install the car radio to prevent the car fuse from blowing. Reconnect the car battery only after the car radio is fully installed.
3.2. Radio Installation Guide
No additional frame or cable changes are needed as the unit comes with all necessary accessories and an outer frame that perfectly matches your car's center console. The wiring harness is plug-and-play.
3.2.1. A/C Bracket and A/C Control Panel Trim Installation
For the A/C bracket, use a precision cutting tool (e.g., rotary tool or small hobby saw) to cut off the red-marked tabs on your factory A/C control module. Be careful not to cut the middle part between the two red areas, as this center section is essential for proper installation.
After trimming, your control module should resemble the image with outer tabs trimmed and the central portion intact. Once trimmed, install the A/C bracket, ensuring it is oriented correctly.
For the A/C Control Panel Trim, choose the correct trim based on your vehicle's A/C type (Manual A/C or Automatic A/C).
3.3. Wiring Diagrams
3.3.1. Radio Wiring Harness Diagram
3.3.2. Radio Rear Panel Pinout Diagram
Only connect the labeled plugs on the original car radio. The remaining plugs do not need to be connected.
3.4. Rear Camera Wiring Tutorial
Connect the red wire (A) of the camera to the positive terminal of the backup light. The wires' colors may vary, but pin locations should be consistent.
3.5. CANBUS Box Setup
If your vehicle requires a CANBUS Box to retain original car information display, follow these steps:
- Go to Settings.
- Select Factory Settings.
- Choose Protocol settings.
- Select the Protocol Box Brand (refer to the surface of the protocol box for the brand name).
Completing the protocol box matching will generally activate the steering wheel control function automatically.
4. Operating Instructions
4.1. Wireless CarPlay & Android Auto
The unit supports wireless Apple CarPlay and Wireless Android Auto. Connect your smartphone via Bluetooth and WiFi to access navigation, calls, messages, music, and voice assistant features (Siri for iOS, Google Assistant for Android).
For a visual guide on the product, please watch the video below:
4.2. GPS Navigation
The unit features built-in GPS navigation with offline map capabilities. When connected to Wi-Fi or a hotspot, you can also access online maps and navigation apps from the Play Store (e.g., Sygic, Waze, Navitel IGO).
4.3. Wi-Fi Connection
Connect the unit to a mobile hotspot or Wi-Fi device to enable online features. This allows you to download apps like YouTube, Spotify, Pandora, watch online videos, use online navigation, and browse the internet.
4.4. Bluetooth Handsfree Calls
The unit supports Bluetooth 5.1 for hands-free calls, allowing you to safely answer calls while driving. It also enables wireless music streaming and automatic synchronization of your mobile phone book.
4.5. Mirror Link (Android/iOS)
Mirror Link allows you to display your phone screen on the car stereo. iOS devices support wireless connection, while Android devices support both wireless and wired connections (via USB/hotspot). This enables access to your phone's navigation, music, and other apps directly on the car radio screen.
4.6. FM Radio Receivers
Enjoy high-quality FM radio with RDS support. You can preset up to 18 stations and receive music, traffic information, and weather forecasts. The unit supports automatic or manual station searching. FM Range: 87.5~108MHz.
4.7. Steering Wheel Control
You can use the existing steering wheel buttons to control the unit. To set up, go to Settings > Protocol Settings > Car Model and select "OD--BMW--E90--OD".
4.8. DSP & EQ Settings
The unit supports various music styles, including Hifi, Bass, Rock, and Pop. You can customize equalizer settings to your preference for an enhanced audio experience.
4.9. Split Touchscreen
The split-screen function allows you to view two applications simultaneously, such as GPS navigation and music playback, for a more convenient driving experience.
5. Maintenance
To ensure the longevity and optimal performance of your car radio, keep the screen clean using a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Ensure all connections remain secure and free from moisture.
6. Troubleshooting (Radio FAQs)
- Q1: What is the factory password?
- A: The factory password is 3368.
- Q2: The rear camera image is reversed (left to right). How can I fix it?
- A: Go to Settings > General and toggle the "Mirror view on reverse image" option to adjust.
- Q3: Why is the original car's rear camera image not clear?
- A: The factory rear camera image may not be clear enough because the old camera signal uses CVBS (360P), while our new radio screen supports AHD (1080P). We recommend using our supplied camera for better image quality on the new radio.
- Q4: How do I turn off the camera's guideline?
- A: Go to Settings > Factory (enter "3368") > Original Car Agreement and turn off "Reverse Parking Line."
- Q5: What should I do if the radio experiences issues like freezing and stuttering?
- A: Go to Settings > User > Backup and Reset (enter "3368") and tap Erase All Data (Factory Reset). You can also perform a hard reset by using a pin-like tool to press the RST hole on the front panel of the radio for 5-10 seconds.
- Q6: Is it possible to support Sirius XM radio?
- A: The radio does not have a port for connecting a SiriusXM tuner for Satellite Radio. You may check the Play Store for online SiriusXM Radio apps, but compatibility with third-party apps is not guaranteed.
- Q7: Does it support the original car microphone?
- A: The factory microphone cannot be retained. Connect the external microphone to the 3.5mm port on the RCA cable. It is recommended to install the microphone on the driver's side sun visor, with the microphone head facing the driver's face.
- Q8: Can I use a voice assistant (Siri, etc.)?
- A: The voice assistant can only be activated through your phone. Connect your phone to the radio via Bluetooth, Android Auto, or CarPlay, and then use the voice assistant feature on your phone.
- Q9: Why is the time not accurate?
- A: Ensure your GPS antenna is properly connected. Install the GPS antenna on the A-pillar of your car or just outside the dash. Connect your radio to Wi-Fi or a hotspot, then go to Settings > System > Date and Time, and enable "Use network-provided time" and "Use network-provided time zone."
- Q13: Why can't I receive FM radio stations after installing the new head unit?
- A: If your vehicle is a high-trim model, ensure the high-trim radio antenna adapter is properly connected to the original factory radio antenna socket. Connect the blue wire from the high-trim antenna adapter to the red ACC (Accessory Power) wire on the 16-pin power harness to provide necessary power for the antenna amplifier. Failure to do so may result in poor or no FM signal reception.
- Q14: Why is there no sound from the radio after installation?
- A: Check if your factory connector includes an amplifier control wire or a MOST (Media Oriented Systems Transport) wire. If your connector has an amplifier control wire, open the Radio app, go to Settings, and enable "RDS." If your car has a Harman Kardon fiber optic logic 7 system or if your factory car radio plug doesn't have 8 speaker cables, the unit cannot be installed directly. If your connector has a MOST wire (usually two orange wires), you will need to purchase an additional fiber optic box for the audio to function properly.
7. Specifications
| Feature | Specification |
|---|---|
| Operating System | Android 12 |
| CPU | 4-Core |
| RAM | 4G |
| ROM | 64G |
| Display Size | 9" (2.5D Touch Screen) |
| Wireless Connectivity | Wireless Carplay, Wireless Android Auto, Bluetooth 5.1, Wi-Fi |
| Mirror Link | Wireless/Wired (iOS wireless, Android wireless/wired) |
| Voice Control | Support AI voice control (via connected phone) |
| GPS Navigation | Built-in GPS, offline map support, free updates |
| Tuner Type | Support FM, AM (Optional) |
| FM Range | 87.5~108MHz |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Max External Memory | 64G |
| Digital Media Format | MP4, Mp3, WMA, JPEG |
| OSD Language | Multi-language support (Chinese, English, Arabic, German, French, Spanish, etc.) |
| Special Features | Wi-Fi function, Built-in GPS, Split Screen, MP3 players, CarPlay, Voice Control, Android Auto, DSP, Reversing Input, Support steering wheel control, Support Can-Bus |
| Certification | CE, FCC, WEEE, EAC, RoHS, KC |
| Material | Composite Material |
| TF/Micro SD Slot | 2 |
| Din | Double Din |
| Interface | USB/RCA |
| Built-in DVD Player | No |
| Built-in CD player | No |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Category | Combination product |
| AV-OUT | Need converter |
8. User Tips
- Always disconnect the car battery before installation to prevent potential damage to the car's electrical system or the radio.
- For optimal Wireless CarPlay and Android Auto performance, ensure both Bluetooth and Wi-Fi connections are stable. Connecting the camera input cable can help enhance these signals.
- If your vehicle uses a CANBUS Box, follow the protocol box matching steps in the settings menu to ensure proper communication and activation of features like steering wheel controls.
- If the original car's rear camera image is unclear, consider using the camera provided with the unit for better image quality, as it supports AHD (1080P).
- If you experience no sound after installation, check if your car has a power amplifier. If so, locate its power cable and connect it to the 12V ACC cable of the radio.
- When testing the car radio, you can combine the red and yellow wires and connect them to the positive side of the power supply, and the black line to the negative power supply.
- Always use the provided power cables to connect the car radio; do not attempt to insert the original car plug directly into the new unit.
9. Warranty and Support
9.1. Warranty
This product comes with a 1-year warranty.
9.2. Technical Support
For any questions regarding installation, wiring, or other technical assistance, please reach out to our customer support team. You can access after-sales support by visiting our official website or using the forum to ask questions or report issues.
A user manual in PDF format is also available for detailed guidance. You can view it online or download it for reference.