1. Safety Precautions
Please read and understand all safety instructions before using the Nanlite PavoTube II 6C.
- Please open the package to check for damage caused in transit. If damaged, do not use and contact the place of purchase or manufacturer as soon as possible.
- Do not use a power cord with damaged insulation. Do not unplug hard or drag the power cord directly.
- Make sure that the power supply voltage used matches the voltage specified by the light before installation.
- When cleaning or not using the light, please turn it off.
- Keep the light safely stored and away from children.
Notice
- Do not place any object on the light emitter.
- Keep the light away from direct contact with liquids (Waterproof bag optional).
- Don't place the light near flammable substances like alcohol or gasoline.
- When cleaning the light, please wipe off debris or dirt by using a dry cloth with clean water or neutral cleanser.
- The light should be operated safely where it won't be at risk of getting wet or under extreme temperature.
- Don't repair the light by yourself. Attempts to self repair will void warranty; for repairs please return to place of purchase.
2. What's in the Box
The standard package for the PavoTube II 6C includes the following items:
- PavoTube II 6C x 1
- Carrying Bag x 1
- Iron Plate x 3
- USB Type-C Cable x 1
- Safety Strap x 1
- User Manual x 1
- Giftbox x 1
3. Product Overview and Technical Data
Product Diagram
Technical Data
| Feature | Specification |
|---|---|
| LED Total Power | 6W×5 |
| Rated Power | 11W |
| Input Voltage/Current | DC5V/2A |
| Lithium Battery | 3.7V/2200mAh, 8.14Wh |
| Color Temperature | 2700K-7500K |
| CRI | Average 95 |
| TLCI | Average 97 |
| Voltage range | High voltage (50-1000V DC, 75-1000V AC) |
| Battery Included | Yes |
| Power Source | Other |
| Inbox adaptor | No |
| High-concerned chemical | None |
| Lighting Type | RGB Video Light |
| Color Temperature Version | RGB Version |
| Brightness Adjustment Range | 0 - 100% |
| Lamp weight | 260g |
| Light length | 25cm |
| Charging interface | USB Type-C port |
4. Setup
4.1 Powering the Unit
The PavoTube II 6C has a built-in lithium battery (3.7V/2200mAh) that provides approximately 1 hour of usage at full power, or up to 6 hours without cable problems. It can also be powered by a charging bank or battery handle accessories.
To charge or power the unit:
- Connect the fixture with a USB Type-C cable, then connect to a USB adapter or power bank (recommended 5V 2A or above, not included).
- The built-in battery automatically powers the unit once charged and unplugged from a power source.
4.2 Installation and Mounting
The PavoTube II 6C offers versatile mounting options:
- 1/4-20 Mounts: The light features standard 1/4-20 mounts for attaching to tripods, light stands, clamps, or ball heads.
- Built-in Magnets: Both ends of the light have built-in magnets, allowing for quick setup on ferrous surfaces. For non-ferrous surfaces, use the included iron plates with gaffer tape.
- Handheld: Use the provided safety strap for secure handheld operation.
- Hanging: The light can be hung using appropriate accessories.
4.3 Wireless Control
The PavoTube II 6C features a built-in 2.4GHz module and Bluetooth module for wireless control:
- RC-C2 Remote Control: Can be used with an RC-C2 remote (purchased separately).
- NANLINK APP: Download the NANLINK APP for direct wireless control via Bluetooth.
5. Operating Instructions
5.1 Controls Overview
The PavoTube II 6C features a clear display and intuitive controls:
- Display: Shows menu and option information.
- Mode Button: Switches between CCT, HSI, Effects modes, and Menu.
- '+' & '-' Buttons: Increase or decrease settings; supports long/short press for faster adjustments.
- Power Button: Long press to power on/off. Short press to reset DIM function to 0%, then short press again to restore previous DIM setting.
- Switch Button: Switches selected options within a menu or mode.
- USB Type-C Port: For DC input and firmware updates.
- Reset Button: Resets the fixture if it freezes or stalls.
5.2 Menu Navigation
To navigate the menu:
- Press the 'Mode' button to enter the Menu.
- Use the 'Switch' button to select from Channel, Language, and Version.
- Use the '+' and '-' buttons to adjust the selected option (e.g., Channel 001-512, English/Chinese language).
- Long press the 'Power' button to turn off the light.
5.3 Lighting Modes
The PavoTube II 6C offers CCT, HSI, and various Effect modes.
5.3.1 CCT Mode (Correlated Color Temperature)
In CCT mode, you can adjust the color temperature from 2700K to 7500K, as well as DIM (brightness) and G/M (Green/Magenta shift).
- Press 'Mode' button to switch to CCT mode.
- Press 'Switch' button to select DIM, CCT, or G/M.
- Use '+' and '-' buttons to adjust the values.
5.3.2 HSI Mode (Hue, Saturation, Intensity)
In HSI mode, you have full control over Hue and Saturation to achieve up to 36,000 colors, along with DIM (brightness).
- Press 'Mode' button to switch to HSI mode.
- Press 'Switch' button to select DIM, HUE, or SAT.
- Use '+' and '-' buttons to adjust the values.
- DIM range: 0% - 100%, HUE range: 0 - 360, SAT range: 0 - 100.
5.3.3 Special Effect Modes
The PavoTube II 6C includes 15 built-in special effects. Each parameter can be customized to simulate various lighting scenes and effects.
To access and customize effects:
- Press 'Mode' button to switch to Effect mode.
- Use 'Switch' button to select the desired effect.
- Use 'Switch' button again to select parameters (DIM, CCT, HUE, SPD, etc.) within the effect.
- Use '+' and '-' buttons to adjust parameter values.
Available effects include:
- HUE Loop: Cycles through hues. (Speed range: 02S-30S)
- CCT Loop: Cycles through color temperatures. (Speed range: 02S-30S)
- INT Loop: Cycles through intensity levels. (Speed range: 02S-30S)
- CCT Flash: Flashes CCT light. (INTVL range: 0.1S-10.0S)
- HUE Flash: Flashes HUE light. (INTVL range: 0.1S-10.0S)
- CCT Pulse: Pulses CCT light. (PULSES/M range: 001-240)
- HUE Pulse: Pulses HUE light. (PULSES/M range: 001-240)
- Storm: Simulates lightning. (INTVL range: 01S-60S)
- TV: Simulates TV screen flicker. (Speed range: 001-100)
- Paparazzi: Simulates camera flashes. (Speed range: 001-100)
- Candle/Fire: Simulates candle or fire light. (Speed range: 001-100)
- Disco: Creates a disco lighting effect. (Speed range: 001-100)
- Bad Bulb: Simulates a flickering, faulty light bulb. (Speed range: 001-100)
- Firework: Simulates firework bursts. (Speed range: 001-100)
- Explosion: Simulates an explosion flash. (Speed range: 001-100)
- Welding: Simulates welding sparks. (Speed range: 001-100)
- Police Car: Simulates police car lights. (Speed range: 001-100)
6. User Tips
- For extended shooting sessions, consider using a power bank or a battery handle accessory to avoid running out of power, especially when operating at full brightness.
- Experiment with the built-in magnets for quick and creative placement in tight spaces or on metal surfaces.
- Utilize the NANLINK APP for precise control over color and effects, which can be more convenient than on-board controls for complex setups.
- When using the light for product photography, the soft light output without additional accessories can be very effective for reducing harsh shadows.
7. Maintenance
To ensure the longevity and optimal performance of your PavoTube II 6C, follow these maintenance guidelines:
- Always turn off the light when not in use or before cleaning.
- Clean the light by wiping off debris or dirt with a dry cloth. For stubborn marks, use a cloth dampened with clean water and a neutral cleanser.
- Avoid using harsh chemicals or abrasive materials that could damage the light's surface.
- Store the light in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the USB Type-C port is free from dust and debris to maintain proper charging and data transfer.
8. Troubleshooting
If you encounter any issues with your PavoTube II 6C, refer to the following table for general fault detection and diagnosis:
| Fault Description | Diagnosis / Solution |
|---|---|
| The light won't start up. | Long press the 'Power' button. If it does not display "NANLITE" Logo, connect to a power source and try again. |
| The display is on but no light output. | Please check if the intensity is set to zero or if the light is in storm/welding mode. |
| The light is flickering. | (1) Please ensure the unit is not being operated in extreme temperatures. (2) Ensure the fixture is not in EFFECT mode. |
| If the failure is not resolved after troubleshooting. | Please contact place of purchase for further assistance. |
9. Warranty and Support
This manual and all stated specifications were produced under controlled conditions and are accurate at the time of print. Any future changes to design or technical data can be found on www.nanlite.com.
For detailed item guides and documents, including a comprehensive user manual in PDF format, please refer to the official documentation. A PDF version of the user manual is available: PavoTube II 6C User Manual (PDF).
For service and support, you may contact Nanlite directly:
- Phone: +86-754-85751187 or +86-754-85300887
- Email: service@nanlite.com
- Address: Zhanglin, 324, Dongli Chenghai Shantou Guangdong China
10. Product Demonstration Video
Watch this video for a visual demonstration of the Nanlite PavoTube II 6C in action, showcasing its features and various lighting applications.