BAOFENG UV-26

Contents

BAOFENG UV-26 Handheld Walkie Talkie User Manual

Model: UV-26 (also referred to as RS-589E)

1. Product Overview

The BAOFENG UV-26 is a dual-band, explosion-proof handheld transceiver designed for reliable two-way voice communication. It features GPS, Bluetooth for app programming, recording capabilities, frequency hopping, and encryption for enhanced privacy and functionality.

Video 1.1: BAOFENG UV-26 Product Overview. This video demonstrates the physical appearance and basic handling of the walkie talkie.

2. Safety Information

Please read all safety warnings and instructions carefully before using this product to ensure safe operation and prevent damage.

General Safety Precautions:

  • Do not operate in flammable, explosive, or other transceiver-forbidden places such as petrol stations, gas stations, hospitals, or airports.
  • Do not expose to direct sunlight for extended periods or place near heating devices.
  • Avoid extremely dusty, moist, or splash-prone environments; do not place on unstable surfaces.
  • If the device emits smoke or strange odors, immediately remove the battery and contact your dealer.
  • Do not transmit without the antenna installed, as this can damage the device.
  • Refer all servicing to well-trained professional technicians only.

Battery and Charging Safety:

  • The power supply is DC 7.4V. Use only the configured RB-589E 7.4V 1800mAh Li-ion Battery.
  • Do NOT repair or disassemble the battery yourself.
  • Do NOT charge the battery in explosion-proof locations.
  • Charge the transceiver only with the configured adapter. Do not use unapproved batteries or chargers.
  • Do not expose the battery to temperatures below -20°C or above +40°C.
  • Ensure the transceiver antenna, earphone jack cover, and battery cover are dry before attachment. Water exposure can cause serious damage.
  • Do not immerse the battery in water or allow it to contact wet materials. Do not short-circuit the battery.
  • Do NOT attach, remove, or charge the battery in explosion-proof locations.

Explosion-Proof Compliance:

The BAOFENG UV-26 (RS-589E) explosion-proof marine transceiver meets GB3836.1-2010 and GB3836.4-2010 standards for explosive environments. It is intrinsically safe with an explosion-proof mark of Ex ib IIB T4 Gb. This product is suitable for use in zones 1 and 2 containing IIA-IIB and T1-T4 explosive gas mixtures.

The battery features dual output current limiting and short-circuit protection. Its compact design ensures safe and reliable explosion-proof performance in hazardous gas environments.

Explosion-Proof Gas Groups and Temperature Classes:

Temperature ClassGroup IIA (e.g., Methane, Propane)Group IIB (e.g., Ethylene, Propylene)Group IIC (e.g., Hydrogen, Acetylene)
T1 (450°C)Methane, Toluene, Propane, AcetonePropylene, Dimethyl EtherHydrogen, Water Gas
T2 (300°C)Methanol, Ethanol, Butane, CyclopentaneButadiene, EthoxyethaneAcetylene
T3 (200°C)Pentane, Hexane, Naphtha, TurpentineDimethyl Ether, Propylene Aldehyde
T4 (135°C)Acetaldehyde, TrimethylamineDibutyl Ether, TetrafluoroethyleneCarbon Disulfide

3. Package Contents

Carefully unpack the product and verify that all items listed below are included and undamaged. If any items are missing or damaged, contact your dealer immediately.

  • 1 x BAOFENG UV-26 HAM Radio
  • 1 x Soft Antenna
  • 1 x Li-ion Battery Pack (RB-589E 7.4V 1800mAh)
  • 1 x Charger (Desktop Charger with AC Adaptor)
  • 1 x Belt Clip
  • 1 x Sling
  • 1 x Program Cable
  • 1 x English User's Manual (PDF)
Contents of the BAOFENG UV-26 package including the radio, antenna, battery, charger, belt clip, sling, and programming cable.
Image 3.1: BAOFENG UV-26 Package Contents. This image displays all items included in the product box.

4. Setup

4.1 Charging the Battery

  1. Connect the AC adaptor cable to the desktop charger, then plug the adaptor into an AC power outlet. The charger's orange light will illuminate for 2 seconds and then turn off.
  2. Insert the battery pack (or the transceiver with the battery attached) into the battery groove of the desktop charger, ensuring it is well-connected and stable.
  3. The charger's red light will turn on or flash, indicating charging has started. The light will turn green when the battery is fully charged.

Warning: Do not charge in explosion-proof locations.

Note: It is recommended to power off the transceiver before charging for accurate battery status indication.

4.2 Installing/Removing the Battery Pack

  1. Installation: Lay the battery pack into the battery groove on the back of the transceiver. Press the bottom of the battery and push it forward until you hear a click, indicating it is securely fixed.
  2. Removal: Press the "PUSH" clip located on top of the battery pack and gently pull the battery downward to detach it from the transceiver.
Back view of BAOFENG UV-26 with battery removed, showing battery contacts and label.
Image 4.1: BAOFENG UV-26 with Battery Removed. This image shows the battery compartment and the separate battery pack.

Warning: Do not attach or remove the battery in explosion-proof locations. Never short-circuit battery terminals or dispose of batteries in fire. Do not attempt to remove the shell or install the battery in dangerous environments, as electric sparks can cause explosions.

4.3 Installing/Removing the Antenna

  1. Installation: Screw the supplied antenna clockwise into the antenna base on top of the transceiver until it is firm.
  2. Removal: Rotate the antenna counter-clockwise to unscrew and remove it.

4.4 Installing the Belt Clip

First, remove the battery pack. Align the belt clip with the two screw holes on the transceiver's back. Use a screwdriver to secure the belt clip. To remove, unscrew it.

4.5 Installing External Loudspeaker/Microphone

Open the rubber plug covering the accessory jacks on the side of the transceiver and insert the external loudspeaker/microphone plug firmly.

Warning: Do not insert or pull out external loudspeaker/microphone in explosion-proof locations.

5. Basic Operation

5.1 Power On/Off and Volume Adjustment

Rotate the [PWR/VOL] control knob (top-right) clockwise to power on the transceiver. A beep tone will sound. Continue rotating to adjust the volume. Rotate counter-clockwise until a click is heard to power off.

5.2 Main/Auxiliary Band Selection (Single/Dual-Band Standby)

  • The main band handles both transmit and receive functions, while the auxiliary band is for receive only.
  • Press the [A/B] key to switch between the main and auxiliary bands. The band with an arrow indicator is the main band.
  • To switch between single-band and dual-band standby, press the [V/M] key. When in single-band mode, the "DT" icon will disappear from the screen. Press [V/M] again to return to dual-band standby.

5.3 PTT (Push-to-Talk) Transmit

To transmit, press and hold the [PTT] key (left side). The red indicator light will turn on. Speak into the microphone with normal volume. Release the [PTT] key to return to receive mode.

Note: Keep your lips 3-5cm away from the microphone for optimal audio quality.

5.4 Signal Monitoring

For weak signals or channels with CTCSS/DCS, long press the [MONI] key to temporarily disable squelch and monitor the signal.

5.5 Torch Light Function

Press the [MONI] key briefly to turn on the torch light. Press it again to activate SOS blinking mode. Press it a third time to turn off the torch light.

5.6 Keypad Lock

Press and hold the [*] key for 2 seconds to lock or unlock the keypad.

5.7 FM Radio Function

Long press the [MENU] key for 2 seconds to enter FM radio mode. The first line of the display will show "FM", and the second line will show the current frequency. Long press [MENU] again for 2 seconds to exit FM radio mode.

  • In FM Radio mode, use the [UP] and [DOWN] arrow keys to manually seek stations. Press [#] to automatically seek and stop at a station with a signal.
  • You can directly input radio frequencies using the numeric keypad.

6. Advanced Features and Main Functions

6.1 Bluetooth APP Programming

The BAOFENG UV-26 supports wireless programming via Bluetooth using a dedicated mobile application (Android/iOS). This allows you to program radio frequencies and settings directly from your smartphone, eliminating the need for a programming cable.

Diagram showing BAOFENG UV-26 with Bluetooth icon connecting to a smartphone app for programming.
Image 6.1: Bluetooth Programming. This diagram illustrates how the UV-26 can be programmed wirelessly via a smartphone app.

6.2 GPS Position

The built-in GPS function provides real-time location information. This feature can be used for location sharing and improving teamwork coordination.

6.3 Recording Function

The UV-26 offers up to 360 hours of real-time recording, making it suitable for professionals who need to record and store communication information.

6.4 Frequency Hopping and Scramble

These functions are designed to enhance call privacy and security by making your communications more difficult to intercept.

6.5 Display Modes

The transceiver offers three display modes: Frequency, Channel, and Frequency-Channel. Switch between these modes by pressing the [EXIT] key.

6.6 Channel Save and Delete

  • Saving a Channel: In frequency mode, set your desired frequency and other parameters (CTCSS/DCS, offset). Press [MENU], navigate to Menu No.34 "MEM-CH", then press [MENU] again. Select a channel number using the arrow keys or numeric keypad. If "CH-" is displayed, the channel is already occupied. Press [MENU] to save.
  • Deleting a Channel: In standby mode, press [MENU], navigate to Menu No.35 "DEL-CH", then press [MENU] again. Select the channel number to delete. If "CH-" is displayed, the channel is saved and can be deleted. Press [MENU] to confirm.

6.7 Scan Function

The UV-26 supports channel scan, frequency scan, and full-range scan with three recovery methods: TO (Time Scan), CO (Carrier Scan), and SE (Search Scan).

  • Channel Scan: In channel mode, long press [# SCN] to start scanning.
  • Full-range Scan: In frequency mode, long press [# SCN] to start scanning across the entire frequency range.

6.8 DTMF Encode and Decode

Utilize DTMF (Dual-Tone Multi-Frequency) for selective calling and group calling functions.

  • Manual Call: Press and hold [PTT], then use the keypad to enter DTMF characters (0-9, A, B, C, D, *, #).
  • Automatic Code Call: Save up to 8 DTMF numbers (max 16 bits) via PC programming. Use the [PF] programmable key to select a saved DTMF number, then press [PTT] to dial.

6.9 ANI (Automatic Number Identification)

Configure ANI to transmit your transceiver's ID code during DTMF calls, allowing the receiving party to identify you.

6.10 1750Hz Tone Transmit

This tone is often used to access repeaters. Set the [PF] programmable key to transmit a 1750Hz tone via Menu No.19 "PFK".

6.11 Fell Alarm Function

Activate this function via Menu No.20 "FALL". If the transceiver inclines at an angle less than 40 degrees for 10 seconds, it will enter alarm status and emit an alarm voice. The alarm stops when the transceiver returns to a vertical position for 2 seconds.

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the transceiver. Do not use harsh chemicals or solvents.
  • Battery Care: Always use the specified battery and charger. Do not expose the battery to extreme temperatures. If the battery is not used for a long time, charge it partially before storing.
  • Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna.
  • Storage: Store the transceiver in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

ProblemPossible Cause & Solution
No power on responseBattery exhausted (recharge/replace). Battery not installed correctly (remove/reload).
Battery exhausts quicklyBattery pack life ending (replace battery).
Cannot contact group membersOut of effective range. Different frequency/CTCSS/DCS/DTMF signals (reset settings).
Hear other voices on channelIncorrect CTCSS/DCS/DTMF signal (change/reset).
Short communication distanceAntenna not connected/original. Low battery voltage. Squelch level too high.

9. Specifications

General Specifications:

  • Frequency Range: FM 65-108MHz (RX), AM 108-136MHz (RX), VHF 136-174MHz (TX&RX), VHF 200-260MHz (TX&RX), UHF 350-390MHz (RX), UHF 400-480MHz (TX&RX), UHF 480-520MHz (RX)
  • Modulation Type: 16k0F3E (Wide band) / 8k5F3E (Narrow band)
  • Memory Channels: 999 Groups
  • Frequency Step: 2.5K, 5.0K, 6.25K, 10.0K, 12.5K, 20.0K, 25.0K, 50.0K
  • Operating Temperature: -20°C to +60°C
  • Frequency Stability: ±2.5ppm
  • Voltage Rating: DC 7.4V
  • Battery Capacity: 1800mAh (Li-ion)
  • Antenna Impedance: 50 Ohm
  • Dimensions (W x H x D): 61mm x 125.5mm x 36.5mm
  • Weight: 280g (With Battery, Antenna, and Belt Clip)

Transmitter:

  • RF Power: 10W (High), 5W (Mid), 1W (Low)
  • Max Frequency Deviation: ±5kHz (Wide band), ±2.5kHz (Narrow band)
  • Audio Distortion: ≤5%
  • Adjacent Channel Power: ≥65dB (Wide band), ≥55dB (Narrow band)

Receiver:

  • Sensitivity (12dB SINAD): ≤0.2μV
  • Adjacent Channel Selectivity: ≥55dB (Wide band), ≥50dB (Narrow band)
  • Intermodulation Rejection: ≥55dB (Wide band), ≥50dB (Narrow band)
  • Common Channel Inhibition: ≥-8dB
  • Blocking Characteristic: ≥85dB

10. User Tips

No specific user tips were available from provided reviews or Q&A content.

11. Frequently Asked Questions (FAQ)

No specific FAQ content was available from provided Q&A content.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer's authorized service center. Keep your proof of purchase for warranty claims.

© 2023 BAOFENG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.