Niwalker N01 Max Long Beam Flashlight User Manual

1. Introduction

The Niwalker N01 Max is an efficient Type C rechargeable LED flashlight designed for long-range illumination. It features a high-performance long shot LED, delivering a maximum output of 2000 lumens and a maximum beam distance of 1300 meters. The flashlight is powered by a single 21700 battery and includes a convenient battery indicator.

Image: Niwalker N01 Max flashlights in various colors.

2. Safety Warnings

• Flashlights are high-intensity lighting devices capable of causing eye damage or other harms. Avoid shining the light directly into anyone's eyes.
• Keep flashlights away from children.
• To protect the battery, driver circuit, and LED, it is not recommended to run the light at maximum mode for more than ten minutes continuously.

3. Package Contents

Please check the box for the following items:

• Niwalker N01 Max Flashlight
• Lanyard (x1)
• Spare O-ring (x1)
• USB-C Charging Cord (x1)
• Niwalker 21700 5000mAh battery (x1) (Optional, may be included depending on package)
• User Manual (this document)

Image: Included items in the Niwalker N01 Max package.

4. Setup

4.1 Battery Installation

1. Unscrew the tail cap or head of the flashlight.
2. Insert the 21700 battery with the positive (+) end facing towards the head of the flashlight.
3. Screw down the light head and body tightly before use to ensure proper contact and water resistance.

Image: Battery installation in the Niwalker N01 Max flashlight.

4.2 Charging

The N01 Max supports Type-C charging. Use a 5V2A charger for optimal charging performance.

1. Connect the USB-C charging cord to the flashlight's charging port.
2. Connect the other end of the USB-C charging cord to a 5V2A USB power adapter.
3. During charging, the indicator light under the button will flash red.
4. Once the battery is fully charged, the indicator light will turn blue.

Image: Niwalker N01 Max flashlight connected for charging.

5. Operating Instructions

The N01 Max features a side switch for all operations.

5.1 Turn ON/OFF

• Press the side switch once to turn the light ON.
• Press the side switch once again to turn the light OFF.

5.2 Change Modes

• Moonlight Mode: When the light is OFF, long press the side switch to activate Firefly (Moonlight) mode. Press once to turn OFF.
• Stepped Ramping: When the light is ON, long press the side switch to cycle through 5 different brightness levels. Release the switch to select the desired brightness. The light will turn on in the last mode accessed. Press once to turn OFF.
• Turbo Mode: Double click the side switch from any mode (ON or OFF) to instantly activate Turbo mode. Press once to turn OFF.
• Strobe Mode: Triple click the side switch from any mode (ON or OFF) to activate Strobe mode. Press once to turn OFF.

5.3 Battery Power Monitor

To check the battery voltage:

• When the light is OFF, four clicks of the side switch will activate the battery power monitor.
• The flashlight will flash to indicate the corresponding voltage value. For example, if the flashlight flashes slowly 3 times and then quickly 7 times, it means the voltage is 3.7V.
• Press once to turn OFF the monitor.

5.4 Lockout Function

To prevent accidental activation:

• When the light is OFF, press the switch five times quickly to lock the light. It will flash 3 times to confirm it is locked.
• To unlock, click the switch five times quickly again.

6. Maintenance

• Clean the flashlight body with a soft, damp cloth. Avoid using harsh chemicals or abrasives.
• Regularly check and lubricate the O-rings with silicone grease to maintain water resistance. Replace worn O-rings as needed.
• Keep the threads clean and lubricated for smooth operation.
• If the flashlight will not be used for an extended period, remove the battery to prevent leakage and damage.

7. Troubleshooting

• Flashlight not turning on: Ensure the battery is correctly installed with the positive end facing forward. Check if the battery is charged. Make sure the head and body are screwed on tightly.
• Intermittent light or flickering: Clean the battery contacts and threads. Ensure the battery is fully charged and properly installed.
• Charging issues: Verify that the USB-C cable and charger are working correctly. Ensure the cable is fully inserted into the port.

8. Specifications

8.1 General Parameters

Image: Technical parameters of the flashlight.

8.2 ANSI/NEMA FL1 Parameters (Lighting Mode)

Impact Resistance: 1.5 meter

Waterproof: IP65

Note: The above parameters are approximate and may vary between lights, batteries, and environment.

Image: Performance specifications according to ANSI/NEMA FL1 standards.

Image: Dimensions of the Niwalker N01 Max flashlight.

Image: Long beam distance demonstration of the flashlight at night.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always refer to the operating instructions for best performance.

10. Warranty and Support

10.1 Warranty Terms

• 15-Day Free Replacement: If quality issues arise during normal use within 15 days of purchase, you are entitled to a free replacement.
• 5-Year Limited Warranty: For issues beyond the 15-day free replacement period, maintenance service will be provided for up to 5 years. The cost of parts will be charged, and freight should be paid by the customer.

For detailed warranty information, you may refer to the official user manual PDF: Niwalker N01 Max User Manual (PDF).

10.2 Contact Information

For support or warranty claims, please contact:

• Phone: +86-0769-82050520
• Email: sales@niwalkerlight.com
• Website: www.niwalkerlight.com
• Address: Building B, Yifeng industrial park, Yifeng road, Baida Industrial Estate, Baiguodong, Zhangmutou, Dongguan, China