1. Product Overview
This 220V COB LED strip light is designed for high-brightness illumination in various settings, including home, commercial, and decorative applications. It is energy-efficient, durable, and offers three light color options: Cold White, Neutral White, and Warm White. The strip comes with a power plug (EU or AU depending on selection) and complimentary mounting clips for easy installation.
2. Safety Precautions
⚠️ Warning: Read carefully before installation and use:
- **Important:** After connecting to the power supply, you must quickly expand the light strip. Due to the high brightness, the light strip will heat up normally during operation. Do not keep it rolled or stacked together, as this will cause the light strip to overheat and melt.
- Do not expose the light strip's plug to water or damp environments. The plug's power connection is not waterproof.
- Keep away from children, pets, and flammable items.
- Do not arbitrarily cut, splice, or modify the wiring or LED components, except at designated cutting marks.
- Use only the included power plug; do not connect to incompatible power sources.
- Ensure adequate ventilation during use to prevent overheating.
- Disconnect power before installation, cleaning, or maintenance.
3. Package Contents
Verify that all the following accessories are included in your package:
- COB LED Strip Light
- EU or AU Switch Plug (220V)
- Mounting Clips
- Screws
4. Installation and Setup
Step 1: Prepare the Installation Area
- Ensure the wall or surface where the strip light will be installed is clean and dry.
Step 2: Connect Power
- Connect the LED strip to the provided EU or AU switch plug. Ensure the connection is secure.
- Plug the EU or AU plug into a compatible 220V AC power outlet.
- The light strip will illuminate by default.
Step 3: Install the Strip Light
- Secure the strip light using the provided mounting clips and screws.
- Avoid excessive bending of the strip light to prevent damage.
- Prevent sharp objects from pressing against or scratching the LED beads.
The strip is flexible and can be used for various decorative purposes.
The strip can be cut every 50cm at designated marks to fit your desired length. Refer to the diagram below:
5. Operating Instructions
The LED strip light operates on a 220V AC power source and is designed for 'Always On' functionality when connected. Use the integrated on/off switch on the power plug to control the light.
The light strip is available in three color temperatures:
- Warm White (3000K)
- Neutral White (4500K)
- Cold White (6000K)
6. Care and Maintenance
- Gently wipe with a dry cloth or slightly damp soft cloth. Do not use chemical cleaners.
- Store in a dry place when not in use.
- Do not forcefully pull or coil the power cord.
7. Troubleshooting
If the LED strip light does not function as expected, consider the following:
- **No Light:** Ensure the power plug is securely connected to both the strip and the 220V AC outlet. Check if the on/off switch is in the 'on' position.
- **Overheating:** Immediately disconnect power if the strip feels excessively hot. Ensure the strip is fully uncoiled and has adequate ventilation during operation.
- **Uneven Lighting:** Check for any physical damage or kinks in the strip that might affect LED performance.
If issues persist, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Product Type | 220V COB LED Strip Light |
| LEDs Number/Meter | 288 LEDs/meter |
| Color Temperature | Warm White (3000K), Neutral White (4500K), Cold White (6000K) |
| Waterproof Rate | IP65 Waterproof (strip only, power connector requires treatment for outdoor use) |
| Working Voltage | AC220V |
| Plug Type | EU Switch Plug or AU Switch Plug |
| Cuttable Interval | Every 50cm |
| Strip Size | W10 x H4mm |
| Color Rendering Index (CRI) | >= 85RA |
| Luminous Flux | 249-2000 (units not specified, typical for lumens) |
| Average Life (hrs) | 30000 |
| Power Consumption (W/m) | 8.64W/m |
| Certification | CE, ROHS, LVD |
| Power Source | AC |
| Is Smart Device | No |
| Is Batteries Included | No |
9. User Tips
- Always unroll the entire LED strip before powering it on to prevent localized overheating and potential damage.
- For outdoor installations, ensure the power plug and any connections are properly waterproofed, as only the strip itself is IP65 rated.
- Plan your installation carefully, marking cutting points (every 50cm) before making any cuts to ensure desired length and avoid damaging the strip.
10. Warranty and Support
For after-sales service, please contact the official customer support of FD Light and Lighting Store. Be prepared to provide proof of purchase for any warranty claims or support inquiries.
The product is covered by a fast delivery guarantee, with potential compensation for delays, and refunds for lost packages or damaged items. Please refer to the seller's policies for full details.