GGBEE Night Light

Contents

GGBEE Induction Night Light Motion Sensor LED Cabinet Light User Manual

Model: Night Light

Introduction

This manual provides instructions for the safe and efficient use of your GGBEE Induction Night Light. This versatile LED light features motion sensing, USB rechargeability, and wireless installation, making it ideal for various indoor applications such as cabinets, wardrobes, hallways, and staircases. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

  • Do not look directly at the light source, especially the light source with high brightness or flashing mode, as this may cause eye strain or damage.
  • This light is not waterproof. Please use it only in dry indoor environments. Avoid exposure to water or high humidity.
  • Ensure the light is firmly installed to prevent falling, which could cause injury or damage to the product.
  • During installation and use, avoid collision or dropping the sensor light to prevent damage to internal components.
  • Keep out of reach of children.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.

Specifications

Property Value
Product NameMotion sensor light
MaterialABS
Luminous Flux249-2000
Nominal Voltage3V
Voltage3V
Light SourceLED bulbs
Is Bulbs IncludedYes
Body MaterialABS
CertificationCCC, ce, FCC, ROHS
ShapeRectangle
Power GenerationMotion
TypeNight Light
OriginMainland China
Wattage0-5W
Item TypeNight Lights
Is Batteries RequiredYes
Is Batteries IncludedYes
Power SourceRechargeable battery
UseEMERGENCY
High-concerned chemicalNone
Sensing methodInfrared sensor in the dark
Power1/2/3/5W (depending on model)
Input charging voltage5V, 1A
Sensing rangeAngle: ≤120°, within 3-5 meters
Charging time≤3h
Product light colorWhite (6000K) / Warm (3000K)
Available Lengths10cm, 20cm, 30cm, 50cm
Width12mm
Product Parameters table and various light lengths
Figure 1: Product Parameters and available sizes (10cm, 20cm, 30cm, 50cm).

Package Contents

The package typically includes:

  • Motion Sensor LED Cabinet Light (selected size and color)
  • USB Charging Cable
  • Adhesive Metal Sheets
  • Magnets
20CM Warm white light with USB cable and adhesive pads
Figure 2: Example of a 20CM Warm white light and its included accessories.

Setup and Installation

Follow these steps to install your GGBEE Induction Night Light:

  1. Prepare the Surface: Choose a clean, dry, and smooth surface for installation.
  2. Attach Magnets and Metal Sheets: Install the magnets and stainless steel sheets in order according to the diagram provided.
  3. Peel Adhesive: Peel off the adhesive backing film attached to the stainless steel sheet.
  4. Align and Press: Align the metal sheet with the desired installation location and press it firmly for a few seconds to ensure a strong bond.
  5. Attach Light: The motion sensor light can then be magnetically attached to the installed metal sheet.
  6. Easy Removal: The light can be easily removed from the magnetic attachment at any time for charging or repositioning.
Installation Instructions diagram showing steps for attaching magnets and stainless steel sheets, aligning, and pressing the light.
Figure 3: Step-by-step installation diagram.
Various applicable scenarios: Headboard, Bedside, Bathroom, Bookcase.
Figure 4: Applicable scenarios for the motion sensor light.

Operating Instructions

The light features a multi-function switch and a Type-C charging socket.

Diagram showing regional functions: Type-c Socket, Signal Indicator Light, PC Translucent Panel, Sensing Area, and Switching Mode instructions.
Figure 5: Regional functions and switching mode instructions.

Switching Modes:

The light has a 3-button control (AUTO-OFF-ON) and a long-press function for brightness adjustment.

  1. Constant On Mode: Press the switch once, and the light will turn on and stay on.
  2. Night Sensing Mode: Press the switch again (second press), and the light will flash twice to indicate activation of the "night sensing mode." In this mode, the light will only activate when motion is detected in a dark environment.
  3. Day Night Sensing Mode: Press the switch a third time, and the light will flash four times to activate the "Day Night Sensing Mode." In this mode, the light will activate when motion is detected regardless of ambient light conditions.
  4. Turn Off: Press the switch for the fourth time to turn off the light.
  5. Adjust Brightness: Long press the button to adjust the brightness incrementally.

Motion Sensor Functionality:

Motion sensor light detecting a person's feet, showing 120° induction angle and 3m distance, with text 'The light will turn off automatically about 25 seconds after you leave'.
Figure 6: Motion sensing range and auto-off feature.
0 SECONDS SENSING LIGHTS UP WHEN PEOPLE COME diagram, showing SENSOR MODE (auto-sensing, light up when people come, go out automatically after 25 seconds) and NORMAL MODE (pushbutton switch, always-on mode).
Figure 7: Sensor Mode vs. Normal Mode.
  • Sensing Range: The light detects motion within an angle of ≤120° and a distance of 3-5 meters.
  • Auto-Off: In sensing modes, the light will turn off automatically approximately 25 seconds after you leave the sensing range.

Charging the Device:

  • Connect the provided USB charging cable to the Type-C socket on the light and to a 5V, 1A USB power source.
  • The signal indicator light will show red while charging.
  • Once fully charged (approximately ≤3 hours), the indicator light will turn green.

Maintenance

  • Cleaning: Clean the light with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.
  • Storage: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place.
  • Environment: Ensure the light is always used in a dry environment to prevent damage.

Troubleshooting

Problem Possible Cause Solution
Light not turning on in sensing mode Not dark enough (for Night Sensing Mode)
Low battery
Incorrect mode selected
Motion outside sensing range
Ensure ambient light is low enough or switch to Day Night Sensing Mode.
Recharge the light.
Press the switch to cycle through modes (Night Sensing or Day Night Sensing).
Ensure motion occurs within 3-5 meters and 120° angle.
Light not holding charge Charging cable not properly connected
Faulty charging cable/adapter
Battery degradation
Ensure secure connection.
Try a different USB cable or power adapter.
If battery life significantly decreases, consider replacing the unit.
Light flickering Low battery
Environmental interference
Recharge the light fully.
Ensure the light is not exposed to extreme temperatures or strong electromagnetic fields.
Light falls off after installation Improper installation
Surface not clean/smooth
Adhesive not fully cured
Re-install following instructions carefully, ensuring surface is clean and dry. Apply firm pressure for sufficient time.

User Tips

  • For optimal motion sensing, place the light in areas with clear lines of sight to where motion will occur, such as the edge of a bed or the entrance of a closet.
  • Adjust brightness by long-pressing the switch to suit your environment and conserve battery life.
  • Utilize the magnetic attachment for easy removal and recharging, especially in hard-to-reach areas.
  • Consider using the "Night Sensing Mode" for bedrooms and hallways to save battery, as it only activates in the dark.

Warranty and Support

For product support, warranty inquiries, or to report any issues, please refer to the seller's contact information or the official product page where you made your purchase. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.