1. Introduction
Thank you for choosing the Xiaomi Wireless Headset. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new earphones. Please read it carefully before use.

Figure 1: Xiaomi Wireless Headset J18 in its charging case.
2. Setup and First Use
2.1 Unboxing and Initial Overview
Video 1: Product unboxing and demonstration, showing cover opening connection and battery display.
2.2 Powering On
For first-time use, press and hold the power button on the charging case for approximately 10 seconds to turn on the earphones.
2.3 Bluetooth Pairing
- Ensure your smartphone or audio device has Bluetooth enabled.
- Open the charging case of the Xiaomi Wireless Headset. The earphones will automatically enter pairing mode.
- On your device, search for available Bluetooth devices and select "J18" (or similar, depending on your device's display) to connect.
- Once connected, the earphones are ready for use.
2.4 Charging
The earphones are charged by placing them into the charging case. The charging case itself is charged via a Type-C connector. Ensure the headset is dry before charging.
3. Operation
3.1 Touch Controls
The earphones feature advanced touch control technology for easy management of audio and calls. The touch-sensitive areas are located on the exterior of each earbud.

Figure 2: Overview of touch control functions.
- Play/Pause: Double-click the right ear touch area.
- Answer/Hang Up Call: Double-click the right ear touch area.
- Previous Track: Long press the left ear touch area.
- Next Track: Long press the right ear touch area.
- Voice Assistant: Tap the designated touch area (refer to Figure 2 for icon).
- Power On/Off: Typically managed by placing in/removing from the charging case, or initial 10-second press for first use.

Figure 3: Detailed touch control gestures.
3.2 Volume Adjustment
Volume can be adjusted either through your connected smartphone or via the touch controls on the earphones (specific gesture not detailed, typically involves tapping or swiping on some models).
3.3 Key Features
- HD Call Quality: Equipped with a built-in noise-cancelling microphone for clear conversations.
- Low Latency: Provides synchronized audio for an optimal gaming and video playback experience.
- Sound Isolating: Designed to isolate sound for an immersive listening experience.
- Active Noise-Cancellation: Reduces ambient noise for clearer audio.
- Waterproof: Features IPX4 dustproof and waterproof rating, protecting against liquid dripping.

Figure 4: IPX4 Waterproof feature, preventing liquid dripping.
4. Maintenance and Precautions
4.1 Cleaning
Regularly wipe the earphones and charging case with a dry, soft cloth to keep them clean and free from debris.
4.2 Water Resistance
The earphones are IPX4 waterproof, meaning they are resistant to splashing water. However, they are not designed for submersion. Do not use them while showering or swimming. Always ensure the headset is completely dry before placing it in the charging case or connecting it to a charger.
5. Troubleshooting
5.1 Cannot Connect or Pair
If you experience difficulty connecting or pairing your earphones:
- Ensure both the earphones and your device are sufficiently charged.
- Turn off and then turn on Bluetooth on your smartphone or audio device.
- Place the earphones back into their charging case, close the lid, then open it again to reset them.
- Restart both your device and the earphones, then attempt the pairing process again.
6. Specifications
The following table outlines the technical specifications of the Xiaomi Wireless Headset J18:

Figure 5: Product dimensions and key parameters.
| Feature | Specification |
|---|---|
| Model | J18 |
| Bluetooth Version | 5.3 |
| Bluetooth Bands | 2.4GHz |
| Wireless Range | 10m-20m |
| Charging Case Battery Capacity | 250mAh |
| Headset Battery Capacity (each) | 30mAh |
| Working Hours | 5 hours |
| Impedance Range | Up to 32 Ω |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 56dB |
| Material | Plastic |
| Waterproof Rating | IPX4 |
| Charging Method | Charging case (Type-C) |
| Vocalism Principle | Hybrid Technology |
| Certification | CE |
| Single Side Headset Weight | 3.8g |
7. Warranty and Support
7.1 Warranty Information
This product comes with a one-year warranty covering non-man-made damage from the date of purchase. A replacement is available for eligible issues.
7.2 Additional Resources
For a more detailed guide, you may refer to the official user manual PDF: View User Manual (PDF)
8. User Tips
- Always ensure your earphones are dry before placing them in the charging case to prevent damage.
- Regular cleaning with a dry cloth helps maintain optimal performance and hygiene.
- If experiencing connection issues, a simple restart of both the earphones and your connected device often resolves the problem.