1. Product Information
This manual provides detailed instructions for the installation, operation, and maintenance of your BYNCG Car 5-inch Monitor AHD 1080P Brake Light Reverse Camera system. This system is designed to enhance driving safety by providing a clear rear view, especially during reversing maneuvers.
Product Name
AHD 1080P CVBS IR Night Vision Brake Light Backup Car Camera 170° Wide Angle Waterproof For Peugeot Partner Citroen 2008-2018
Model Details
- Model: KA456New AV
- Product Number: 260201
Package Contents
Please verify all components are present and undamaged upon unboxing:
- AHD Monitor x1
- 1080P AV Camera (Brake Light Reverse Camera) x1 (Optional, depending on package)
- 10m AV Cable x1 (Optional, depending on package)
- Bracket x2 (Suction cup mount and dashboard mount)
- DC Cable x1 or x2 (depending on package)
- Fixed Sticker x1
- User Manual x1
- Packaging Box x1
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
General Safety Precautions
- Safety First: Always perform installation operations after the vehicle has been turned off, cooled down, and the negative terminal of the battery has been disconnected. This prevents short circuits, accidental start-ups, electric shocks, or burns.
- Personal Protection: Wear appropriate safety protective equipment such as goggles and gloves during operation.
- Stable Environment: Ensure that the vehicle is parked on a flat, sturdy, and well-ventilated surface. Use a jack and safety stand for reliable support; do not rely solely on the jack.
- Professional Advice: This manual provides general guidance. Car maintenance requires professional knowledge, specialized tools, and experience. We strongly recommend that you entrust the installation work to a qualified car maintenance technician. Incorrect installation may cause vehicle malfunctions, performance degradation, or serious safety accidents.
Product-Specific Warnings
- Children: Keep the device and its cord out of reach of children under 3 years old.
- Plastic Bag Warning: To avoid danger of suffocation, keep the plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
3. Setup and Installation
Preparation Before Installation
- Tools and Materials: Ensure the vehicle's "User Manual", "Service Manual", necessary specialized tools (such as torque wrenches), and general-purpose tools are readily available.
- Accessory Check: After unpacking, immediately check against the accessory list to ensure all parts are present and undamaged.
- Old Parts Comparison: Carefully compare the new parts with the removed old parts, and confirm that key features such as size, shape, interface, and bolt hole position are completely consistent before installation.
Important: This operation is for reference only. Please refer to your Vehicle Maintenance Manual for specific instructions.
Step 1: Safety Preparation
- Park the vehicle, apply the handbrake, and secure the non-operating wheels with chocks.
- Disconnect the negative cable of the battery (negative first, then positive) and properly isolate it.
Step 2: Disassemble Old Accessories (if replacing existing components)
- Orderly Disassembly: Disassemble from the outside to the inside and from accessories to the main body. Properly store and label all bolts, nuts, clips, and small parts.
- Avoid Force: Use appropriate tools. If there is any jamming, check for hidden fixing points or buckles. Do not pry or pull forcibly.
- Handling Connections: For electrical connectors, first press down the latch and then pull it out. For oil pipelines (such as engine oil, brake oil), first clean the area around the connection and use a special tool to disassemble it, preparing a container to catch the flowing oil.
- Clean Contact Surface: After removing the old parts, clean the installation contact surface to ensure it is free of rust, oil stains, and residues of old sealing materials.
Step 3: Install New Accessories
- Replacement of Consumables: In principle, damaged gaskets, sealing rings, O-rings, clamps, locknuts, etc., during disassembly must be replaced with new ones.
- Standardized Tightening: Use a torque wrench to tighten the bolts according to the sequence and torque values specified in the maintenance manual. Typically, bolts are tightened in a "crosswise, fractional, and progressive" manner.
- Reliable Connection: Ensure that all electrical plugs are fully inserted and locked; all oil and air pipes are securely connected, with clamps in the correct position.
- Add Lubricant/Sealant: Apply the specified type of lubricating grease or sealant to the designated locations (such as bearings, threads, sealing surfaces) as required by the manual.
Wiring Diagram
Proper wiring is crucial for the correct function of the reverse camera system. Refer to the diagrams below for detailed connections.
Camera Installation Location
The brake light reverse camera is designed to integrate seamlessly into the existing brake light housing of compatible vehicles (Ducato, Ram ProMaster, Peugeot Boxer, Citroen Jumper). It provides a wide 170° viewing angle.
Monitor Installation
The monitor can be installed in two ways using the provided brackets: on the dashboard or on the windshield via a suction cup mount.
4. Operating Instructions
Post-Installation Inspection and Testing
- Visual and Manual Inspection: Confirm that all components are installed in place, and no tools or parts are left in the engine compartment or work area.
- Phased Testing (Crucial):
- Static Test (not started): Restore the battery connection. Turn on the power, check the dashboard for any fault lights, and test relevant electrical functions (such as lights, switches).
- Idle Test (after startup): Start the engine and observe for any abnormal noise, vibration, oil leakage, water leakage, or air leakage. Check the instrument panel data for normal operation.
- Dynamic Road Test (conducted cautiously): Conduct low-speed tests on a closed road section that is absolutely safe and legal. First, test basic functions such as braking and steering to feel whether the vehicle is functioning normally. Gradually test the functions of systems related to newly replaced parts.
Monitor Controls
The monitor features three buttons on the back panel for chroma adjustment (Hue, Brightness, Contrast).
AHD/CVBS Signal Switching
The camera supports both AHD and CVBS video signals. If your Android unit or head unit does not support AHD signal, you can switch the camera to CVBS mode by cutting the white wire on the camera's control line.
Note: The AHD camera is primarily designed for use with an AHD monitor for optimal quality. Ensure compatibility with your display unit.
5. Maintenance & Storage
- Break-in Period: Some components may require a break-in period to achieve optimal performance. Please avoid aggressive driving during the initial stage after installation.
- Regular Inspection: It is recommended that during the first maintenance after installation, a technician should review your installation work.
- Cleaning: The monitor screen has a dustproof protective film. Gently peel it off after installation for a clear view. Clean the camera lens and monitor screen with a soft, damp cloth. Avoid abrasive cleaners.
6. Troubleshooting
Fault Symptoms
If any of the following occurs after installation, immediately stop using the vehicle and contact a professional technician for troubleshooting:
- Abnormal noise
- Warning lights illuminate
- Fluid leaks
- Unusual odors
- Performance decreases
Common Issues & Solutions:
- No image on monitor: Check all power connections to both the monitor and camera. Ensure video cables are securely connected. Verify the camera is receiving power when the vehicle is in reverse.
- Poor image quality: Ensure the camera lens is clean. Check for proper signal type (AHD vs. CVBS) compatibility with your monitor. Verify all connections are tight.
- Intermittent signal: Check for loose connections or damaged cables. Ensure proper grounding.
7. Specifications
Monitor Specifications
| Feature | Specification |
|---|---|
| Screen Size | 5 inch |
| Display Type | TFT LCD IPS |
| Resolution | 1024x600 |
| Brightness | 500cd |
| Viewing Angle | IPS Full Viewing Angle |
| Dimensions (L x H) | 126mm x 83mm |
Camera Specifications
| Feature | Specification |
|---|---|
| Video Resolution | 1080P HD |
| Viewing Angle | 170° Wide-angle |
| Waterproof Level | IP68 (Industrial-grade, rainproof & shockproof) |
| Lens Material | Glass |
| Shell Material | Plastic |
| Guiding Line | Yes (Adjustable Parking Line) |
| Alarm Type | Vehicle Backup Cameras |
| Night Vision | Yes |
General Specifications
| Feature | Specification |
|---|---|
| Brand Name | BYNCG |
| Wire or Wireless | Wire |
| Length of Video Cable | 10M |
| Certification | CE |
8. Warranty & Support
Manufacturer Information
Company Name: Yiwu Yuet top e-commercelimite
Full Address: Room 401, No. 1, Building 7, Zongtang Second District, Jiangdong Street, Yiwu City, Zhejiang Province (independent declaration)
Email: 517636919@qq.com
Responsible Person: MoRuChao
Phone: +86-13631860484
EU Representative Information
AR Company Name: MJCM SARL
Full Address: 78 avenue des Champ-Elysees Bureau 326 Paris Ile-de-France
Email: mjcm190928@gmail.com
Phone: 0033767213611
Additional Resources
A detailed user manual with further information and diagrams is available in PDF format. You can access it directly via the following link: View User Manual (PDF)