Introduction
Thank you for choosing the YESPER Armor Mini Jump Starter. This device is designed to provide a reliable solution for jump-starting vehicles, charging mobile devices, and offering emergency lighting. Always observe safety precautions when using electrical appliances. Read all instructions carefully and keep this manual for future reference.
Video: Overview of the YESPER Armor Mini Jump Starter, showcasing its features, accessories, and various functions.
Product Layout
The YESPER Armor Mini is a compact and powerful device. Familiarize yourself with its components:
- Power Button: Activates the device and controls the flashlight.
- Battery Level Indicators: LED lights showing the remaining charge (25%, 50%, 75%, 100%).
- Jump Start Port: Connects to the smart jumper cables.
- USB-C Input Port: Used for charging the jump starter.
- USB-A Output Port: Used for charging external USB devices.
- LED Flashlight: Provides illumination, strobe, and SOS modes.
- Smart Jumper Cables: Includes positive (red) and negative (black) clamps with a smart indicator box.
Image: The YESPER Armor Mini Jump Starter unit, smart jumper cables, and USB-C charging cable.
Safety Precautions
Read all safety warnings carefully before using this unit to prevent injury or damage.
General Warnings:
- Read the instruction manual carefully before using this unit.
- Jump start only 12V vehicles. Using it for other jumping purposes can be hazardous.
- Do NOT use this unit if any cable clamp or cord is damaged.
- Do NOT use in place of a vehicle battery.
- Never leave the unit connected to the car battery after cranking the car successfully.
- Make sure to check all battery connections are CLEAN before jump starting. Ensure the battery clamps are well connected. If the battery terminals on the vehicle are dirty or corroded, the power of the unit will be lessened.
- Do NOT jump start more than 2 times in a row. This may damage the unit by overheating.
- Remove the product from the vehicle battery within 30 seconds of jump starting. If not, it could lead to damage.
- Do NOT connect the two clamps together.
- Do NOT use by young or infirm persons without supervision.
- Do NOT use as a toy.
- Do NOT allow the product to become wet.
- Do NOT submerge the product in water.
- Do NOT operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Do NOT modify or disassemble the YESPER Armor Mini. Only a qualified technician may repair this unit.
- Make sure someone should be within range of your voice and close enough to come to your aid when working with batteries.
- Remove personal metal items like rings, bracelets, necklaces, etc., when using the products.
- Do NOT drop the unit. If the unit receives a sharp blow or is otherwise damaged in any way, have it checked by a qualified battery technician.
- Do NOT store in locations where the temperature may exceed 80°C.
- Charge only at ambient temperature between 0°C and 45°C.
- Charge only using the charger provided with this unit or one of the same standard with the host input port.
- Do NOT use the unit to jump start a vehicle while charging the internal battery.
- If this unit is leaking liquid, dispose of it at a proper recycle facility immediately.
- Under extreme conditions, battery leakage can occur. If liquid is noticed coming from the product, do not handle with bare hands. In case of skin contact, wash with soap and water immediately. If liquid comes in contact with eyes, rinse eyes with cold running water for at least 10 minutes and get medical attention immediately.
- Product contains a lithium-based battery; at the end of product life, dispose of the product according to local regulations.
- After jump starting the car, do not charge this unit immediately.
- Do not use the jumper cable to charge other equipment.
DSLI IV 10 Safety Protections:
The YESPER Armor Mini incorporates advanced safety features to ensure secure operation:
- Over Temperature Protection
- Short Circuit Protection
- Overcharge Protection
- Over Discharge Protection
- Anti-Charge Protection
- Low Self-Consumption Protection
- AI Software Protection
- Reverse Polarity Protection
- Overvoltage Protection
- Overcurrent Protection
Image: Visual representation of the 10 safety protections integrated into the jump starter.
Setup
Initial Charging:
Before first use, fully charge your YESPER Armor Mini.
- Plug a home adapter (not included) into a universal socket.
- Connect the USB-C input port of the YESPER Armor Mini to the adapter using the provided USB-C cable.
- The indicator lights will flash one by one during charging. All indicators will light off when charging is paused or completed.
- A full charge typically takes 3.5 hours.
Operating Instructions
Checking Battery Level:
Press the power button once to check the current charge level. The LED indicators will illuminate to show the remaining battery capacity (25%, 50%, 75%, 100%).
Jump Starting a 12V Vehicle:
The YESPER Armor Mini is suitable for 12V vehicles with up to 7.0L gas engines and 5.5L diesel engines, including motorcycles, cars, SUVs, trucks, and boats.
- Ensure the jump starter is sufficiently charged.
- Connect the blue plug of the smart jumper cables fully into the jump start port on the Armor Mini. Ensure the cable indicator is off.
- Connect the red clamp to the positive (+) battery terminal of the vehicle.
- Connect the black clamp to the negative (-) battery terminal of the vehicle.
- Observe the indicator on the smart jumper cable:
- Solid Green Light: Ready to start.
- Flashing Green Light: Battery voltage is too low, press the "BOOST" button on the smart cable for 3 seconds until it turns solid green.
- Solid Red Light: Reverse polarity detected. Recheck connections.
- Start the vehicle's engine.
- Once the vehicle is started, immediately remove the jumper cables from the vehicle battery (within 30 seconds).
- Leave the vehicle's engine running.
Image: A diagram illustrating the three steps for jump-starting a car: Connect, Ready (green light), and Go (start engine).
Image: A person jump-starting a vehicle, demonstrating the use of the jump starter and its 'BOOST' function for completely dead batteries.
Charging USB Devices:
The jump starter can act as a power bank for your electronic devices.
- Connect your device's charging cable to the USB-A output port (5V/2.1A) of the jump starter.
- Press the power button once to begin charging.
- If charging does not start, try another USB output port (if available) or ensure the jump starter has sufficient charge.
Image: The YESPER Armor Mini connected via USB-A to charge a smartphone and a tablet, illustrating its power bank functionality.
Using the LED Flashlight:
The built-in LED flashlight has multiple modes for emergency situations.
- Press and hold the power button for 3 seconds to turn on the LED flashlight (normal mode).
- Press the power button slightly to cycle through the modes: normal light, strobe light, SOS signal.
- Press and hold the power button for 3 seconds again to turn off the flashlight.
Maintenance
To ensure the longevity and optimal performance of your YESPER Armor Mini:
- Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
- Although the battery can last 6-12 months on standby, it is recommended to recharge the unit every 3 months to maintain battery health.
- Keep the unit clean and free from dust and debris.
- Regularly inspect the smart jumper cables for any signs of damage or wear.
Troubleshooting
If you encounter issues with your YESPER Armor Mini, refer to the table below:
| Trouble | Reason | Remedies |
|---|---|---|
| Vehicle does not start | Low battery on jump starter; poor cable connection; vehicle battery completely dead. | Recharge jump starter; ensure clamps are securely connected to clean battery terminals; use BOOST function if vehicle battery is completely dead. |
| Smart cable indicator is red | Reverse polarity connection. | Disconnect clamps and reconnect them correctly (red to positive, black to negative). |
| Jump starter not charging devices | Jump starter battery low; incorrect port used; device cable faulty. | Charge the jump starter; ensure using USB-A output port; try a different charging cable or device. |
| LED flashlight not working | Not activated correctly; jump starter battery low. | Press and hold power button for 3 seconds; charge the jump starter. |
If there is any other problem with this unit, please contact customer support directly at cs@yes-per.com.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | YESPER |
| Model | A-Armor-MINI |
| Battery Type | Li-ion Battery (Lithium Polymer) |
| Battery Capacity | 12000 mAh = 44.4 Wh Total Energy |
| Battery Voltage | 3.7 V Nominal |
| Peak Current | 1500 A |
| Power Output | 12 V (Jump-Start) |
| USB-C Input | 5 V 2 A |
| USB-A Output | 5 V/2.1 A Auto-Matched Output |
| Gas Engine Rating | Up to 7.0 L |
| Diesel Engine Rating | Up to 5.5 L |
| Service Temperature | -20°C to 60°C (-4°F to 140°F) |
| Full Charge Time | 3.5 Hours to 100% |
| Long-Lasting Standby | Up to 12 Months |
| Item Weight | 0.68 lb (0.31 kg) |
| Product Dimensions | 0.93"D x 2.99"W x 5.82"H (Approx. 2.36 x 7.59 x 14.78 cm) |
| Special Features | USB, Lighting, Warning Light, SOS Lighting |
| Certifications | CE, FCC, SDS, MSDS, ROHS, CCC, UL |
Parts List
The package typically includes the following items:
- YESPER Armor Mini Jump Starter Unit
- Smart Jumper Cables with Clamps
- USB-C Charging Cable
- User Manual (this document)
Image: The YESPER Armor Mini Jump Starter, smart cables, and charging cable laid out on a table.
User Tips
- For optimal performance, ensure the jump starter is fully charged before use.
- If your vehicle's battery is completely dead, utilize the "BOOST" function on the smart jumper cables for a quick and effective start.
- Regularly check the charge level and recharge the unit every 3 months, even if not in use, to prolong battery life.
- This compact device is powerful enough to start various vehicles, including smaller engines like a 1.8L petrol BMW with a dead battery, multiple times without issues.
Warranty & Support
Warranty Information:
We offer a limited warranty for 12 months from the date of purchase by the end user/consumer. The conditions of warranty are as follows:
- The warranty is only valid upon presentation of the original receipt (from dealer/seller) by the original purchaser.
- The warranty is void if the serial number, date of purchase, or label has been removed or tampered with.
- The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification, or repairs by unauthorized third parties.
- We are not liable for any incidental or consequential damages arising from the use or misuse of this product.
- All warranty claims are limited to repair or replacement of the defective product at our sole discretion. Replaced parts will be equivalent in function and covered for the remaining time of the original warranty period. Repair or replacement may involve the use of reconditioned units.
- Consumable components such as batteries are not covered by the warranty.
Extended Service for Members:
- 12+6 Months Online After-Sales Service: Within 12 months, we provide timely and effective online after-sales service. If you register on our official store yes-per.com and become a member, you will receive an extra 6 months of service, totaling 18 months.
- 30 Days Money Back Guarantee: Within the first 30 days after your purchase, you can apply for a return through your seller if you have any issues.
- 10 Days to 12 Months (18 Months for Member Customers): We will replace a defective unit due to manufacturing issues with a new one within 12 months. If you are a member customer, this period extends to 18 months.
Customer Support:
For any inquiries or support, please feel free to contact us:
- Email: cs@yes-per.com
- Website: yes-per.com
Thank You for Choosing YESPER!