Cccam egyglod X96 M200

Contents

X96 M200 Android 14.0 Tv Box User Manual

Model: X96 M200

1. Introduction

The X96 M200 is an advanced Android 14.0 TV Box designed to transform your television into a smart entertainment hub. Powered by the Amlogic S905X5M processor, it offers seamless streaming, gaming, and multimedia playback with support for 4K resolution, Wi-Fi 6, and Bluetooth 5.0. This manual provides detailed instructions for setting up, operating, and troubleshooting your device to ensure an optimal user experience.

2. Important Safety Information

Please read and follow these safety guidelines carefully to prevent damage to the device or personal injury.

  • Electric Shock Risk: DO NOT open the device casing. There are no user-serviceable parts inside. All repairs must be performed by qualified personnel. Unauthorized opening may void the warranty and cause safety hazards.
  • Environmental Conditions: Do not expose the set-top box (STB) or power adapter to rain, moisture, humidity, or extreme temperatures. The recommended operating temperature range is 0°C-40°C; storage temperature range is -20°C-60°C. This product is intended for indoor use only; do not use it outdoors or in damp environments (e.g., bathrooms, kitchens).
  • Power Adapter: Use only the provided power adapter with the following specifications: Input: 100-240V~50/60Hz; Output: DC 12V/2A. Using unapproved, damaged, or mismatched power adapters may cause fire, electric shock, or permanent damage to the device.
  • Ventilation: Keep the device away from heat sources (e.g., radiators, stoves, candles) and ensure adequate ventilation (maintain a 10cm gap around the device) to prevent overheating.
  • Cleaning: Disconnect the power supply from the wall outlet before cleaning the device. Wipe the surface with a dry, soft, lint-free cloth; do not use liquid cleaners, aerosol cleaners, or abrasive materials, as they may damage the device.
  • Children Safety: Adult supervision is required during setup and use if children are present. Small parts (e.g., remote control batteries) pose a choking hazard—keep them out of reach of children under 36 months old. If a battery is swallowed, seek medical attention immediately.
  • Abnormal Operation: Stop using the device immediately if you notice smoke, strange odors, abnormal noises, or overheating. Disconnect the power adapter and contact customer support for assistance.
  • Cable Management: Do not place heavy objects on the device or its cables, and avoid pulling, bending, or damaging the power cable and HDMI cable to prevent short circuits.

3. Package Contents

Ensure all items are present in the package:

  • X96 M200 Android TV Box
  • Power Supply (x1)
  • HD Data Cable (HDMI Cable) (x1)
  • User Manual (x1)
  • Remote Control (x1)
Package Contents of X96 M200 TV Box
Image: Contents of the X96 M200 package, including the TV box, power supply, HDMI cable, user manual, and remote control.

4. Product Overview

4.1 Front Panel

  • Power Indicator (LED): Lights up blue when the device is powered on; blinks blue during boot-up; turns red in standby mode.
  • IR Sensor: Receives signals from the remote control. Ensure there are no obstacles between the remote and the sensor for normal operation.
Front view of X96 M200 TV Box with LED display
Image: Front view of the X96 M200 TV Box, showing the digital display and power indicator.

4.2 Rear Panel

  • HDMI OUT: Connect to the HDMI input port of your TV or monitor to transmit video and audio signals.
  • LAN (RJ45): Connect to a router using an Ethernet cable for a stable wired internet connection (supports 10/100/1000Mbps).
  • USB 2.0/3.0 Port: Connect USB flash drives, external hard drives, or other USB devices to play local media (videos, music, photos).
  • DC IN: Connect the provided power adapter to supply power to the device (input voltage: DC 12V).
  • AV OUT (Optional): For analog TV connections (connect to TV's AV input port using an AV cable, not included).
Interface and dimensions diagram of X96 M200 TV Box
Image: Diagram illustrating the various interfaces (DC, Optical, HD, Ethernet, AV, IR) and dimensions (106mm width, 23mm height) of the X96 M200 TV Box.

5. Quick Setup Guide

Follow these steps to set up your set-top box quickly. Ensure all connections are secure before powering on the device.

5.1 Hardware Connection

  1. Open the battery compartment of the remote control, insert 2 AAA batteries, and ensure the positive (+) and negative (-) polarities match the markings inside the compartment. Close the battery compartment securely.
  2. Connect one end of the HDMI cable to the HDMI OUT port on the STB and the other end to the HDMI IN port on your TV/monitor.
  3. (Optional) Connect one end of an Ethernet cable to the LAN port on the STB and the other end to your router for a wired internet connection. If using Wi-Fi, skip this step and configure it later in the setup wizard.
  4. Connect the power adapter to the DC IN port on the STB, then plug the other end of the adapter into a grounded wall outlet.
  5. Power on the STB by pressing the Power button on the device or the remote control. Power on your TV and switch its input source to the HDMI port connected to the STB (e.g., HDMI 1, HDMI 2) using the TV's remote control.

5.2 Initial Configuration (Setup Wizard)

The STB will boot up automatically and display the setup wizard on your TV screen. Follow the on-screen prompts to complete the initial configuration.

  1. Language Selection: Choose your preferred language (English, German, French, Spanish, Italian, etc.—EU languages are supported) from the dropdown menu.
  2. Internet Connection:
    • If using wired internet: The device will connect automatically (DHCP enabled by default).
    • If using Wi-Fi: Select your Wi-Fi network from the list of available networks, enter the Wi-Fi password (case-sensitive), and tap "Connect" to establish the connection.
  3. System Update: If a firmware update is available, the device will prompt you to download and install it. Click "Update Now" and do not power off the device during the update (this may take 2-5 minutes).
  4. Remote Control Pairing (If Applicable): If your remote control supports Bluetooth pairing, follow the on-screen instructions to pair it with the STB (for IR remotes, no pairing is required).
  5. Complete Setup: After configuring all settings, the STB will redirect you to the main menu. You can now start using the device.

6. Basic Operation

6.1 Remote Control Buttons & Functions

Button Function
Power Turn the STB on or off (enters standby mode when turned off).
Home Return to the main menu from any screen.
Back Go back to the previous screen or exit the current menu.
Navigation (↑↓←→) + OK Use the navigation buttons to select options; press OK to confirm your selection.
Volume +/- / Mute Adjust the TV volume; press Mute to turn off audio temporarily.
Number Keys (0-9) Directly input channel numbers (for live TV apps that support channel number input).
Menu Access the device's settings menu and advanced options.
Play/Pause / Stop Control media playback (for local media or VOD content).

6.2 Main Functions

  • Live TV: Open the pre-installed live TV app to stream live channels (internet connection required).
  • Video-on-Demand (VOD): Watch movies, TV shows, and other on-demand content through VOD apps.
  • Media Player: Open the Media Player app to play local media files (MP4, MKV, MP3, JPG, etc.) from USB devices connected to the USB port.
  • Settings: Adjust network, display, audio, and system preferences (see Section 7 for details).

7. Advanced Settings

Access the advanced settings by pressing the "Menu" button on the remote control and selecting "Settings" from the main menu.

7.1 Network Settings

  • Wi-Fi: View available Wi-Fi networks, connect to a new network, forget a saved network, or adjust Wi-Fi signal strength.
  • Wired (LAN): Configure IP settings (DHCP by default; static IP can be set manually if needed).
  • Network Status: Check internet connection status, IP address, subnet mask, gateway, and DNS server.

7.2 Display Settings

  • Resolution: Select the appropriate resolution (1080p@60fps, 4K@60fps, etc.) based on your TV's capabilities. We recommend selecting "Auto" for automatic resolution matching.
  • Screen Size: Adjust the screen size to fix overscan or underscan issues (if the image is cut off on the edges of the TV).
  • HDR Mode: Enable or disable HDR (High Dynamic Range) for better image quality (supported TVs only).

7.3 Audio Settings

  • Audio Output: Select the audio output mode (HDMI, AV, or Optical, if applicable).
  • Audio Language: Select the default audio track language for supported content (if multiple languages are available).
  • Volume Control: Adjust the device's volume level (independent of TV volume).

7.4 System Settings

  • System Update: Check for and install the latest firmware updates manually (automatic updates are enabled by default).
  • Factory Reset: Erase all user data (apps, settings, passwords) and restore the device to its factory defaults. Note: Back up important data before performing a factory reset.
  • About Device: View device model, serial number, firmware version, MAC address, and other device information.
  • Sleep Mode: Set the device to enter standby mode automatically after a period of inactivity (5 minutes, 10 minutes, 30 minutes, or never).

8. Troubleshooting Common Issues

If you encounter problems while using the set-top box, refer to the following troubleshooting guide before contacting customer support. Most issues can be resolved quickly with simple steps.

Issue Troubleshooting Steps
No power, LED indicator not lit
  1. Check if the power adapter is securely connected to the STB's DC IN port and the wall outlet.
  2. Test the wall outlet with another device to ensure it is working.
  3. Check if the power adapter is damaged; replace it with the provided one if necessary.
No picture on TV
  1. Confirm the TV's input source is set to the correct HDMI port (e.g., HDMI 1).
  2. Reconnect the HDMI cable to both the STB and the TV.
  3. Try using a different HDMI cable or TV HDMI port.
  4. Check the display resolution settings (reduce resolution if the TV does not support 4K).
No sound
  1. Adjust the TV and STB volume (ensure mute is disabled).
  2. Confirm the HDMI audio is enabled in the STB's audio settings.
  3. Try a different audio output mode (e.g., AV) if applicable.
  4. Reconnect the HDMI cable.
Remote control not working
  1. Replace the batteries with new AAA batteries (check polarities).
  2. Point the remote control directly at the STB's IR sensor (no obstacles).
  3. Move closer to the STB (within 3 meters).
  4. For Bluetooth remotes, re-pair the remote with the STB using the setup wizard.
Wi-Fi connection issues (slow/unstable)
  1. Move the STB closer to the router to improve signal strength.
  2. Check the Wi-Fi password (case-sensitive).
  3. Restart the STB and router.
  4. Avoid using the STB near other wireless devices (e.g., microwaves, Bluetooth speakers) that may cause interference.
  5. Switch to a wired Ethernet connection for stability.
Slow device performance, apps crashing
  1. Close background apps (go to "Recent Apps" and swipe up to close unused apps).
  2. Clear app cache in the settings (Settings > Apps > Select App > Clear Cache).
  3. Update the device's firmware to the latest version.
  4. Perform a factory reset (back up data first).
USB device not recognized
  1. Ensure the USB device is formatted as FAT32 or NTFS.
  2. Reconnect the USB device to the STB's USB port.
  3. Try using a different USB port or USB device.
  4. Check if the USB device is damaged.

9. Specifications

Detailed technical specifications for the X96 M200 Android TV Box:

Category Feature Specification
Basic Parameters CPU Amlogic S905X5M (Quad Core ARM Cortex A55)
GPU ARM Mali-G310 V2 (OpenGL ES 3.2, Vulkan 1.2 and OpenGL 2.0 support)
Memory (RAM) 4GB (2GB Optional) DDR3
Storage Internal Storage (ROM) 64GB eMMC (16GB/32GB/128GB Optional)
External Storage USB Storage Devices (USB2.0 Support), Micro SD card (Supported)
Software Operating System Android 14
Language Multi-Language
Network Service Wi-Fi Support WiFi IEEE 802.11 a/b/g/n (2.4G and 5G), one external antennas
Bluetooth Support BT5.0
Ethernet 1000M Ethernet
Interface DC Connector DC IN (5V/2A)
Video Output HDMI (4K*2K UHD Output, HDMI 2.1a)
IR Receiver 3.5mm Earphone jack (Remote Receiver Connect)
Micro SD External memory support
USB Port 2x USB2.0 normal type
IPTV Yes
Other Remote controller included Yes
Supported Internet Services Google TV, YouTube
Power Source DC
Voltage range No voltage
High-concerned chemical None
Detailed specifications table for X96 M200 TV Box
Image: A comprehensive table detailing the chipset, GPU, RAM, ROM, external storage, OS, network services, and various interfaces of the X96 M200 TV Box.

10. User Tips

  • For optimal performance, regularly clear app caches and close unused background applications.
  • Ensure your internet connection is stable, especially when streaming 4K content or using Wi-Fi 6.
  • Keep the device's firmware updated to benefit from the latest features and security enhancements.
  • Consider using a wired Ethernet connection for the most stable network performance, particularly for high-bandwidth activities.

11. Warranty & Support

For product support and warranty information, please refer to the details below:

  • Manufacturer: Suichuan Zhien Technology Co.Ltd., Room 302, Unit 2, Building 14, Jinyu Capital Community, North of Ji'an Avenue, Suichuan County, Ji'an City, Jiangxi Province. Email: zhien8899@163.com
  • EU Authorized Representative: HUMISS TRADING S.L, Calle Luis Buñuel 12-3A, Madrid, 28018, Spain. Email: eugpsres@outlook.com

For a complete and detailed user manual, including compliance information and additional diagrams, please refer to the official PDF document: X96 M200 Product Manual (PDF).

The device complies with CE standards.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.