Motorcycle Intake Air Filter User Manual
Model: BN600, BN502, TNT600, BJ600 Series
1. Product Overview
This manual provides essential information for the safe and effective use of your QXDENG Motorcycle Intake Air Filter. Please read all instructions carefully before installation and use.
Figure 1: QXDENG Motorcycle Intake Air Filter for Benelli models. This image shows the main product view with the red frame and black filter material, indicating compatibility with Benelli BJ600, BN600, TNT600, BN502R, and BN502.
Video 1: 360-degree view of the Motorcycle Intake Air Filter, showcasing its design and construction.
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- DANGER! Installation must be carried out by professional technicians or in accordance with the installation instructions strictly.
- Warning! Do not use this product for purposes other than its intended use. After installation, it is necessary to test the product performance before formal use to ensure driving safety.
- Warning! Keep away from children. This product contains small parts and sharp edges, which may cause choking or cutting hazards.
- Warning! Do not expose to water or moisture.
3. Setup and Installation
The QXDENG Motorcycle Intake Air Filter is designed for specific Benelli models to improve air intake efficiency.
Applicable Models:
Figure 2: The air filter is compatible with the following Benelli models: BJ600, BN600, TNT600 (2018-2019), BN502 (2014-2019), and BN502R (2017-2019).
- For BENELLI BJ600 BN600
- For BENELLI TNT600 2018-2019
- For BENELLI BN502 2014-2019
- For BENELLI BN502R 2017-2019
Installation Procedure:
- Ensure the motorcycle engine is cool and turned off.
- Locate the existing air filter housing on your motorcycle.
- Carefully remove the old air filter, noting its orientation.
- Inspect the air filter housing for any debris and clean if necessary.
- Insert the new QXDENG Motorcycle Intake Air Filter into the housing, ensuring it fits securely and correctly.
- Close the air filter housing.
- After installation, it is crucial to test the product performance in a safe environment before formal use to ensure driving safety.
Reminder: Installation must be carried out by professional technicians to ensure proper fitment and safety.
4. Operating Instructions
The air filter is a critical component of your motorcycle's engine, responsible for filtering dust, dirt, and other contaminants from the air entering the engine. A clean air filter ensures optimal engine performance, fuel efficiency, and longevity.
Once installed, the air filter operates continuously as the engine runs. Regular inspection and maintenance are recommended to ensure its effectiveness.
5. Maintenance
This QXDENG Motorcycle Intake Air Filter is designed for durability and reusability, making maintenance straightforward.
Cleaning Procedure:
- Periodically inspect the air filter for accumulation of dirt and debris. The frequency depends on riding conditions (e.g., dusty environments require more frequent checks).
- Carefully remove the air filter from its housing (refer to your motorcycle's service manual for specific removal instructions).
- Gently tap the filter to dislodge loose dirt.
- For thorough cleaning, use a mild detergent and water solution. Rinse the filter thoroughly with clean water until all soap residue is gone.
- Allow the filter to air dry completely before reinstallation. Do not use compressed air, as it can damage the filter material.
- Once completely dry, reinstall the filter into its housing.
Regular cleaning ensures the filter maintains its high-flow characteristics and protects your engine effectively.
6. Troubleshooting
If you experience issues related to engine performance that you suspect are linked to the air filter, consider the following:
- Reduced Engine Power: A clogged air filter can restrict airflow, leading to a loss of engine power. Check and clean the filter.
- Increased Fuel Consumption: An engine struggling for air due to a dirty filter may consume more fuel.
- Unusual Engine Noises: While less common for air filters, any new engine noise should be investigated by a professional.
For any persistent issues or concerns, it is recommended to consult a professional motorcycle mechanic.
7. Specifications
Figure 3: Approximate dimensions of the Motorcycle Intake Air Filter. The filter measures approximately 285mm in overall length, with widths of 255mm and 135mm at different points, and a height of 110mm.
| Feature | Detail |
|---|
| Brand Name | QXDENG |
| Model Name | BN600 Motorcycle Intake Air Filter (Compatible with BN502, TNT600, BJ600) |
| Item Type | Air Filters & Systems |
| Material | Non-woven Fabric, Plastic |
| Features | Washable and Reusable, High Flow |
| Item Weight | 0.23kg |
| Replace NO. | PBE6N1501 |
| Approx. Length | 285mm |
| Approx. Width (max) | 135mm |
8. User Tips
- Always ensure the filter is completely dry before reinstallation to prevent moisture from entering the engine.
- Regularly check your motorcycle's service manual for recommended air filter inspection intervals specific to your model.
- Consider the riding environment; if you frequently ride in dusty or off-road conditions, inspect and clean your air filter more often.
9. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or the EU authorized representative:
Manufacturer:
Guangzhou Tianyi Motorcycle Parts Co., Ltd.
Address: Cn-202, No. 26, Songgang Middle Road, Songbei, Songzhou Street, Baiyun District, Guangzhou, Guangdong Province, China, Postcode: 510000
Phone: +86-15360887016
Email: 602652839@qq.com
EU Authorized Representative:
Synertrade Fr Sas
Address: 9 Rue Du Bat D'argent, 69001 Lyon, France
Contact: +33-774555006
Email: Info@syner-sarl.cn
For further details, you may also refer to the official user manual (PDF).
