1. Important Safety Information
- Sharp Edges: Always wear protective gloves when installing or replacing wiper blades to avoid injury.
- Dry Operation: Do not operate wipers at high speed on dry glass surfaces, as this can cause damage to the wiper blades and windshield.
- Wiper Arm Handling: Do not pull the wiper arm directly with your hands; this can cause breakage.
2. Product Overview
This set includes front and rear windshield wiper blades designed specifically for the Seat Mii models manufactured between 2011 and 2020. They are engineered for high cleaning efficiency and stable operation.
Image: VENDY Wiper Blades set with a compatible Seat Mii vehicle.
3. Installation Guide
Ensure your vehicle is parked safely with the engine off before beginning installation. It is recommended to clean your windshield thoroughly before installing new wiper blades.
Front Wiper Blades Installation:
- Gently lift the existing wiper arm away from the windshield until it locks into the upright position.
- Carefully remove the old wiper blade from the arm. This usually involves pressing a small tab or clip and sliding the blade off.
- Align the mounting clip of the new VENDY wiper blade with the wiper arm hook.
- Gently press the new blade into place until you hear a click, indicating it is securely fastened.
- Carefully lower the wiper arm back onto the windshield.
Rear Wiper Blade Installation:
- Lift the rear wiper arm away from the rear window.
- Remove the old rear wiper blade, following the specific mechanism for your vehicle (often a clip or slide-off).
- Attach the new VENDY rear wiper blade to the arm, ensuring it clicks securely into place.
- Gently lower the rear wiper arm back onto the window.
After installation, test the wipers with windshield washer fluid to ensure proper operation and a clear wipe.
Video: Detailed installation process for VENDY wiper blades.
Image: Visual guide for various wiper blade installation methods.
4. Operating Instructions
VENDY wiper blades are designed to effectively remove rainwater, dirt, and debris from your windshield and rear window, ensuring clear visibility during various weather conditions.
- Normal Operation: Use your vehicle's standard wiper controls to activate the front and rear wipers as needed.
- Ice Formation: If ice forms on the windshield or wiper blades, ensure it is completely removed before operating the wipers to prevent damage.
- Dry Wiping: Avoid operating wipers on a dry windshield for extended periods, as this can wear down the rubber and scratch the glass.
Image: Illustration of wiper performance in various weather conditions.
5. Maintenance
Recommended Replacement Interval:
Replace your wiper blades every 6-12 months, or immediately if you notice any of the following:
- Wiper blade skipping across the windshield.
- Abnormal noise during operation.
- Streaking or smearing on the glass.
Cleaning:
To maintain optimal performance, regularly clean the wiper blades:
- Wipe the rubber strip with a soft cloth dampened with a neutral detergent.
- Do not use gasoline, alcohol, or corrosive cleaning agents, as these can damage the rubber.
Storage:
- Store spare wiper blades in a cool, dry place, away from direct sunlight and high-temperature environments (above 60°C / 140°F).
- When not in use for extended periods, cover the blades with a protective sleeve if available.
Precautions:
- Wiper blades are designed for glass surfaces only and are not suitable for non-glass applications.
- When replacing, always select the correct original equipment manufacturer (OEM) specification and model for your vehicle.
6. Troubleshooting
Common Issues and Solutions:
- Wiper Skipping: This can be caused by aging rubber strips or an oily film on the glass. Clean the windshield and wiper blades thoroughly. If the issue persists, consider replacing the blades.
- Excessive Noise: Check for any foreign objects lodged in the wiper blade or arm. Also, inspect the rubber strip for any deformation. Ensure the wiper arm is not bent and applies even pressure.
- Poor Wiping Performance (Streaks/Smears): This often indicates worn-out blades or a dirty windshield. Clean the blades and windshield. If the problem continues, replace the wiper blades.
7. Specifications
| Feature | Description |
|---|---|
| Product Name | Upgraded Intelligent Boneless Wiper Blades |
| Brand | VENDY |
| Compatibility | Seat Mii (2011-2020) - Left-Hand Drive Vehicles Only |
| Placement | Front & Rear Windshield |
| Front Wiper Sizes | 24 inches (Driver Side), 16 inches (Passenger Side) |
| Rear Wiper Size | 10 inches |
| Material | High-grade Natural Rubber, Memory Elastic Steel Sheet, Double Carbon Steel Bar |
| Temperature Tolerance | +158℉ to -40℉ (-40℃ to +70℃) |
| Lifespan | 1 Million Times of Wiping |
| Color | Black |
| Item Weight | 0.35 kg |
| Item Height | 1.8 cm |
| Item Width | 1.6 cm |
Image: Detailed product parameters including temperature tolerance, lifespan, and a general wiper size chart.
8. User Tips
- Regular Windshield Cleaning: Keep your windshield clean from dirt, grime, and oily films to maximize wiper performance and lifespan.
- Check for Obstructions: Before using wipers, especially after parking, quickly check for any leaves, debris, or ice that could interfere with their movement.
- Proper Fluid Use: Always use a good quality windshield washer fluid, especially in freezing conditions, to help clear the glass and protect the blades.
9. Warranty & Support
For any questions, concerns, or support regarding your VENDY Wiper Blades, please contact the seller directly through your purchase platform.
CE Marking Information:
This product bears the CE marking, which signifies its compliance with the essential requirements of relevant European Union directives concerning safety, hygiene, and environmental protection, making it eligible for sale within the European market.
For a downloadable PDF version of this manual, please refer to the product page or contact the seller.