SUYIJIA 60V 34Ah 18650 Li-ion battery pack

Contents

SUYIJIA 60V 34Ah 18650 Li-ion Battery Pack User Manual

Model: 60V 34Ah 18650 Li-ion battery pack (16S7P)

1. Safety Warnings

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

  • Strictly comply with the following instructions to prevent fire, electric shock, explosion, or equipment damage.
  • Do not expose the battery to fire, high temperatures (>60°C), or intentional heating/burning; doing so may cause explosion.
  • Do not disassemble, modify, puncture, or physically impact the battery; do not directly short-circuit the positive and negative terminals with metal objects—such operations may result in battery failure or fire.
  • Do not immerse the battery in water, rain, or humid environments; keep the battery dry, as water ingress may cause electrical short circuits and safety incidents.
  • Charge exclusively using the dedicated 67.2V lithium battery charger compatible with this battery; do not use non-specified chargers or power supplies with mismatched voltage.
  • Keep the battery and its accessories out of children's reach; store in a cool, dry, well-ventilated, and secure location to prevent accidental contact or ingestion.
  • Immediately discontinue use if the battery exhibits swelling, leakage, unusual odor, or abnormal heating; isolate it from flammable materials and dispose of it properly.
  • Do not charge or operate the battery in enclosed, sun-exposed, heat-source-proximate, or flammable-material-proximate environments.

2. Product Overview

The SUYIJIA 60V 34Ah 18650 Li-ion Battery Pack is designed for high-power applications such as electric vehicles and scooters. It features a 16S7P configuration for reliable performance and includes a built-in Battery Management System (BMS) for enhanced safety.

SUYIJIA 60V 34Ah 18650 Li-ion Battery Pack with specifications and example applications
Main product view showing the 60V 34Ah 16S7P battery pack and its suitable applications like electric bikes and scooters.

Key Features

  • High Capacity & Extended Runtime: 34,000mAh (34Ah) high-capacity configuration, compatible with e-bikes, e-scooters, and other devices—significantly extending single-charge operating range.
  • Built-in BMS Multi-Protection: Integrated overcharge, over-discharge, overcurrent, short-circuit, and overtemperature protection to effectively prevent abnormal battery damage and enhance operational safety.
  • Multi-Connector Compatibility: Supports various mainstream connector types including XT60 and Mini Tamiya—suitable for e-bikes, e-tricycles, e-scooters, personal mobility devices, RC models/aircraft, and outdoor energy storage applications.
  • Stable Voltage Output: Utilizes 18650 cylindrical cells to deliver consistent voltage output, preventing mid-operation power interruption or sudden power drop.
  • PVC Waterproof Enclosure: Blue PVC heat-shrink casing provides basic waterproofing, impact resistance, and dust protection—ideal for demanding outdoor riding conditions.
Battery pack highlighting high power and internal BMS protection board
The battery features high power output and an integrated BMS protection board for safety.
Battery pack shown with various electric bicycles and scooters, indicating broad compatibility
This battery is applicable to a wide range of electric bicycles and scooters on the market.

3. Setup

3.1 Pre-Installation Inspection

  • Inspect the battery exterior for integrity—no physical damage, swelling, electrolyte leakage, terminal oxidation, or loose connections.
  • Verify compatibility between the device's rated voltage, current, and connector type and this battery; ensure the device controller and motor are rated for 60V operation to prevent overvoltage damage.

3.2 Installation Procedure

  • Securely mount the battery inside the device's battery compartment, ensuring firm fixation without risk of vibration-induced loosening or displacement during operation.
  • Confirm correct polarity alignment (red = positive, black = negative) between the battery and device connectors; insert smoothly and fully—do not force insertion or removal.
  • Inspect all wiring for exposed conductors or compression; only activate the device after confirming no short-circuit hazards exist.

4. Operating Instructions

4.1 Charging Procedure

  • Use the dedicated 67.2V lithium battery charger compatible with this battery. Plug the charger connector into the battery's charging port first, then connect the charger to the power outlet.
  • During charging, illumination of the charger's indicator light indicates normal operation; upon completion, disconnect the power outlet first, then unplug the charger from the battery.
  • Charge only in well-ventilated, dry, non-flammable environments—never in enclosed spaces, under direct sunlight, or in high-temperature areas.
  • Recommended maximum single-charge duration is 8 hours; disconnect promptly after full charge to avoid overcharging and reduced battery lifespan.

4.2 Operating Environment

  • Recommended operating temperature range: -10°C to 45°C.
  • Avoid high-current discharge below -10°C, as low temperatures reduce cell reactivity and impair runtime performance.
  • Daily Usage: Avoid deep discharge—discontinue use and recharge promptly when noticeable power loss occurs. Do not store in deeply discharged state long-term; for extended non-use, maintain charge level at 50%-70% and top up every 1-2 months.

5. Maintenance

5.1 Storage Requirements

  • For long-term storage, place the battery in a cool, dry, well-ventilated indoor environment—away from ignition sources, heat sources, and corrosive substances.
  • Recommended storage temperature: 10°C-25°C.

5.2 Cleaning & Maintenance

  • Wipe battery surfaces with a dry cloth only; never rinse or clean directly with water or damp cloths—water ingress may damage internal circuitry.

5.3 Connector Maintenance

  • Periodically inspect connectors for oxidation or looseness; gently clean contact points with anhydrous alcohol to ensure optimal conductivity and prevent overheating due to poor contact.

5.4 Load Limitation

  • Do not exceed the battery's rated discharge current; operating beyond this limit may cause excessive heating, shortened service life, or permanent damage.

6. Troubleshooting Guide

Symptom Possible Cause Solution
Device fails to start
  • Loose or poor connector contact
  • Battery deeply discharged triggering over-discharge protection
  • Reversed polarity connection
  • Reinsert connector firmly to ensure secure engagement
  • Connect to charger to reactivate battery, then use after full charge
  • Verify and correct polarity alignment
Significant reduction in runtime
  • Long-term storage in low-charge state causing cell aging
  • Incomplete charging
  • Operation in low-temperature environment
  • Follow maintenance guidelines—avoid prolonged low-charge storage
  • Fully charge before use; avoid shallow charge/shallow discharge cycles
  • Pre-warm battery in cold conditions; minimize high-current draw
No response during charging
  • Charger malfunction
  • Poor charging port contact
  • Battery in protective lockout mode
  • Replace with a compatible dedicated charger
  • Clean charging port contacts and reinsert charger
  • Let battery rest for 30 minutes, then attempt charging again to reactivate
Excessive battery heating
  • Device current exceeds battery's rated discharge current
  • Poor connector contact or short-circuit risk
  • Inadequate ventilation during charging
  • Verify device specifications and avoid overload operation
  • Cease use immediately; inspect wiring for looseness or short circuits
  • Relocate to a well-ventilated charging area—avoid direct sunlight or enclosed spaces

7. User Tips

No specific user tips were provided in the available reviews or Q&A content. However, based on general battery usage, consider the following:

  • Always use the correct charger to avoid damage and ensure safety.
  • Regularly check battery connections for tightness and cleanliness to maintain optimal performance.
  • For best battery longevity, avoid fully discharging the battery and store it with a partial charge (50-70%) if not used for extended periods.

8. Specifications

Attribute Value
Brand NameSUYIJIA
Model Number60V battery pack
TypeLi-Ion (18650 cylindrical lithium-ion battery pack)
Nominal Voltage60V (rated voltage, suitable for electric vehicles/scooters with 60V system)
Rated Voltage52V (This might be a typo in source data, 60V nominal is consistent with 67.2V fully charged)
Nominal Capacity34Ah (34000mAh)
Cell Structure16S7P (16 serial and 7 parallel)
Rated Discharge Current20-30A continuous discharge (suitable for 500W-1500W motors, depends on BMS)
Max Instantaneous Discharge Current60A (from desc.json)
Max Continuous Charge Current5A (from desc.json)
Size300mm x 145mm x 72mm
Weight-- (Not specified in detail)
ConnectionOthers (Optional Connectors: XT60, Mini Tamiya, and other standard RC/e-bike connectors)
ApplicationLED, Fan, EV, RV, Marine Boat, Trolling Motor, Home Energy, Solar Power Storage, Others, Scooter
OriginMainland China
CertificationCE
High-concerned chemicalNone
Battery pack dimensions: 300mm x 145mm x 72mm
Dimensions display of the battery pack.
Battery pack with dimensions 300mm x 145mm x 70mm and plug types Oda Palace and XT60
Detailed view of the battery pack, including dimensions and common plug types (Oda Palace, XT60).

9. Warranty and Support

9.1 Warranty Policy

This battery is covered by a 12-month limited warranty from the date of purchase, covering non-user-induced quality defects (e.g., cell failure, BMS malfunction).

9.2 Non-Covered Conditions

The following are excluded from warranty coverage:

  • Damage caused by unauthorized disassembly, modification, dropping, impact, or water ingress.
  • Failures resulting from use of incompatible chargers or incorrect-voltage power supplies.
  • Cell degradation due to long-term low-charge storage or overload operation.
  • Battery damage arising from non-compliance with user manual instructions.

9.3 After-Sales Support

For assistance, contact the seller's customer service team with your order number and a detailed description of the issue. Do not attempt self-repair or disassembly—doing so voids warranty eligibility.

Always operate strictly per this manual; improper usage directly compromises battery safety and service life.

10. Statement of Compliance

This product complies with CE certification standards.

⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

11. Manufacturing Process Video

Watch a short video demonstrating the automated manufacturing process of battery cells being assembled, ensuring quality and precision.

12. Additional Resources

For a comprehensive guide, you may refer to the original user manual PDF: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.