Xiaomi TDS Pen Meter Tester

Contents

Xiaomi Water Quality TDS Pen Meter Tester

User Manual

1. Introduction

The Xiaomi Mi TDS Pen is a portable water quality testing device designed to measure Total Dissolved Solids (TDS) in water. It helps users quickly assess water purity by detecting concentrations of minerals, salts, and metal ions. This device is essential for understanding the quality of your drinking water, water for aquariums, or water used in various household applications.

Xiaomi TDS Pen in use, measuring water in a glass

Figure 1: Xiaomi TDS Pen measuring water quality. The display shows the TDS value.

2. Parts of the Device

Familiarize yourself with the different components of your Xiaomi TDS Pen:

  • Protective Cap: Covers the electrode to prevent contamination and damage.
  • Electrode: Titanium alloy sensor for TDS detection. This part is immersed in water.
  • LCD Screen: Displays the TDS value, battery status, and measurement mode.
  • Power Button: Used to turn the device on/off and to hold/release readings.
  • Battery Compartment: Located at the top, holds two AG13 batteries.
  • Temperature Sensor: Exposed sensor for automatic temperature compensation.
Detailed diagram of Xiaomi TDS Pen parts including batteries, electrode, screen, and cap

Figure 2: Detailed view of the TDS Pen components, including replaceable batteries, exposed temperature sensor, IPX6 waterproof body, and high-accuracy probe.

3. Setup

3.1 Battery Installation

  1. Turn the top battery compartment cap counterclockwise to open.
  2. Remove any old batteries if present.
  3. Insert 2 new AG13 (LR44) button batteries with the positive (+) side facing up.
  4. Close the compartment tightly by turning the cap clockwise.

4. Operating Instructions

4.1 Power On/Off

  • To turn on: Press the Power Button once. The LCD screen will light up.
  • Automatic shut-off: The pen will automatically turn off after 10 minutes of inactivity to conserve battery life.
  • To turn off manually: Press and hold the Power Button for 2 seconds.

4.2 Measurement Steps

  1. Remove the protective cap from the electrode.
  2. Press the Power Button to turn on the device.
  3. Immerse the electrode fully into the water you wish to test, up to the immersion line.
  4. Gently stir the pen for 2-3 seconds to remove any air bubbles that may be clinging to the electrode.
  5. Wait 3-5 seconds for the reading on the LCD screen to stabilize.
  6. Read the TDS value displayed in ppm (parts per million).
  7. After testing, rinse the electrode with clean water and gently dry it.
  8. Replace the protective cap to protect the electrode.
Hand pressing the button on the Xiaomi TDS Pen

Figure 3: Simply press the button to start using the TDS Pen.

4.3 Hold Function

  • When the reading on the screen is stable, briefly press the Power Button to lock the displayed value. A "HOLD" icon will appear on the screen.
  • Press the Power Button again to unlock the reading and continue measuring.

4.4 TDS Reading Interpretation

The TDS value indicates the concentration of dissolved solids in water. Refer to the table below for a general interpretation of water quality based on TDS readings:

Table 1: TDS Value Interpretation
TDS Value (ppm)Water Quality
0-50High purity
50-100Good purity
100-200Fair purity
200-300Poor purity
300-400May form scale
400-500Poor taste
>500Not recommended for drinking
TDS purity chart showing ranges from 0-50 (High purity) to >1000 (Not fit to drink)

Figure 4: Visual guide to TDS values and corresponding water quality levels.

4.5 Types of Impurities Detected

The Xiaomi TDS Pen is capable of detecting three main categories of impurities in water:

  • Soluble Salts: Such as Calcium (Ca2+) and Magnesium (Mg2+).
  • Ionic Organic Compounds: Including substances like Ammonium Acetate (CH3COONH4) and Sodium Dodecyl Sulfate (C12H25SO3Na).
  • Heavy Metal Ions: Such as Chromium (Cr), Zinc (Zn), Lead (Pb), and Copper (Cu).
Diagram showing three types of impurities detected: Soluble salts, Ionic organic compounds, and Heavy metal ions

Figure 5: Illustration of the three types of impurities the TDS Pen can detect.

4.6 Applicable Water Types

The Xiaomi TDS Pen can be used to test the purity of various water sources, including:

  • Tap water
  • Boiled water
  • Barreled purified water
  • Water from community water-supply stations
  • Filtered water from water purifiers
  • Fish tank water
Icons representing different water sources that can be tested: tap water, boiled water, purified water, water station, filtered water, fish tank water

Figure 6: Examples of water types suitable for testing with the TDS Pen.

5. Maintenance & Care

5.1 Cleaning

  • After each use, rinse the electrode with distilled water.
  • Gently wipe the electrode dry with a clean cloth.

5.2 Storage

  • Store the TDS Pen in a cool, dry place.
  • Always replace the protective cap over the electrode when not in use to prevent damage and contamination.

5.3 Avoid

  • Do not immerse the pen above the maximum immersion line.
  • Avoid touching the electrode with your fingers, as oils and dirt can affect readings.
  • Do not store the device in high humidity or direct sunlight.
  • Do not use chemicals to clean the sensor/electrode.

6. Troubleshooting

  • No display: Check if the batteries are installed correctly. If they are, replace them with new AG13 batteries.
  • Unstable reading: Ensure there are no air bubbles clinging to the electrode. Make sure the electrode is fully submerged in the water.
  • Inaccurate reading: Clean the electrode as described in the Maintenance section. The device is factory-calibrated (342 ppm NaCl) and does not require user calibration.

7. Specifications

Table 2: Product Specifications
BrandXiaomi
Special FunctionMeasuring Water Quality Purity
Measurement Range0-9990 ppm
Resolution0-999 ppm: 1 ppm; 1000-9990 ppm: 10 ppm (display shows "×10" blinking)
Measurement Accuracy±2% full scale
Temperature CompensationAutomatic (0°C-80°C)
Power Supply2 × AG13 (LR44) button batteries
Dimensions150 mm × 16 mm
Product Weight27.4 g (0.0300 kg)
Waterproof RatingIPX6
MaterialTitanium alloy electrode, ABS plastic body
Wireless CommunicationNon-Remote Function
OriginMainland China
Table of general specifications for Xiaomi TDS Pen

Figure 7: General specifications including brand, function, weight, and dimensions.

8. User Tips

Based on user feedback, here are some tips for optimal use:

  • Always ensure the electrode is clean before and after each test for the most accurate readings.
  • When testing, allow a few seconds for the reading to stabilize before noting the value.
  • The device is designed for water testing only. Do not use it for testing other liquids like chemicals or industrial solutions.

9. Warranty and Support

Warranty information for your Xiaomi Water Quality TDS Pen Meter Tester is typically provided by the seller at the point of purchase. Please refer to your purchase documentation or contact your retailer directly for details regarding warranty coverage and claims.

For technical support or further assistance, please contact the seller or Xiaomi customer service channels available in your region.

© 2023 Xiaomi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.