1. Introduction
This manual provides essential information for the safe and effective use of the 1332 FEP Insulated Electrical Wire. This high-performance wire is designed for applications requiring high temperature resistance and reliable electrical conductivity, such as in electronic equipment and 3D printers. Please read this manual thoroughly before installation and operation.
2. Safety Precautions & Warnings
WARNING:
This electronic wire is for professional electrical wiring use only, and installation, maintenance and replacement must be operated by professional electrical technicians in accordance with relevant electrical safety specifications. Unauthorized disassembly, cutting or modification of the wire is prohibited to prevent electric shock, short circuit and fire risks.
- Before installation and use, carefully check the appearance of the wire: ensure the insulation layer is intact, no cracks, scratches, deformation or damage; reject any wires with appearance defects to avoid potential safety hazards.
- Confirm that the actual operating voltage, ambient temperature and application scenario are completely consistent with the rated parameters of this product, and it is strictly forbidden to overload, overvoltage or over-temperature use.
- During wiring, crimping and installation, avoid sharp bending, excessive stretching, heavy extrusion or friction of the wire, so as not to damage the insulation layer and break the conductor.
- Use matching professional terminals and connectors for crimping or welding operations, ensure the connection is firm and reliable, avoid poor contact, overheating and short circuit faults.
- This product is only suitable for internal fixed or semi-fixed wiring of electrical equipment and battery modules, and is not allowed to be used as outdoor exposed wires or mobile power connection wires.
- Do not use this product in environments with strong mechanical vibration, continuous friction, or corrosive gas concentration exceeding the standard, so as not to accelerate insulation aging and failure.
- Keep the wire away from open fire, high-temperature heat sources and flammable and explosive materials during storage and use to avoid fire accidents.
- Do not mix this product with non-rated wires or wires of different models for combined use, so as not to cause inconsistent performance and safety risks.
- If the insulation layer is damaged or the conductor is exposed during use, stop using it immediately and replace the wire to avoid electric shock and short circuit.
3. Product Overview
3.1 Basic Physical & Dimensional Parameters
| Parameter Item | Standard Specification | Allowable Tolerance |
|---|---|---|
| Full Product Name | 1332 FEP Insulated High Temperature Resistant Electronic Wire | |
| Model Designation | 30/28/26/24/22/20/18/16/14/13/12/11/10AWG | |
| Batch & Serial Number | PL202611 | |
| Conductor Material | Tinned copper | |
| Insulation Material | Fluorinated Ethylene Propylene (FEP) | |
| Place of Origin | People's Republic of China | |
| Long-Term Operating Temperature | -65°C to +200°C | ±5°C |
| Rated Voltage | 600V (Note: Some sources indicate 300V) | Compliant standard tolerance |
| Conductor AWG Size | 10AWG - 30AWG (Conventional Sizes) | Standard AWG dimensional tolerance |
| Insulation Thickness | Matched with corresponding AWG size | ±0.1mm |
| Overall Outer Diameter | Matched with corresponding AWG specification | ±0.2mm |
| Standard Color Options | Black, Red, Yellow, Blue, Green, White, Yellow-Green | Uniform color, no obvious color difference |
3.2 Key Electrical Performance Indicators
- Dielectric Withstand Voltage: Passes withstand voltage test, no breakdown, no insulation damage.
- Insulation Resistance: ≥ 100 MΩ·km at 20°C ambient temperature, ensuring stable insulation performance in high and low temperature environments.
- Flame Retardancy: Passes VW-1 vertical flame test, self-extinguishing within 30 seconds after flame removal, no flame spread, no dripping, meets UL flame retardant grade.
- Chemical Resistance: Excellent resistance to engine oil, acid, alkali, organic solvents and most industrial chemicals, no insulation swelling or cracking after contact.
- Aging Resistance: After 1000 hours of high-temperature aging test at 200°C, the insulation layer has no hardening, cracking or performance degradation, and electrical performance remains stable.
- Flexibility: Good bending resistance, suitable for fixed wiring and semi-flexible wiring scenarios, not easy to break after repeated bending.
4. Installation & Operation Instructions
The 1332 FEP Insulated Electrical Wire is designed for internal fixed or semi-fixed wiring in electrical equipment and battery modules. Follow these guidelines for proper installation and operation:
- Pre-Installation Inspection: Before installation and use, carefully check the appearance of the wire. Ensure the insulation layer is intact, with no cracks, scratches, deformation, or damage. Do not use any wires with visible defects to prevent potential safety hazards.
- Parameter Verification: Confirm that the actual operating voltage, ambient temperature, and application scenario are completely consistent with the rated parameters of this product. It is strictly forbidden to overload, overvoltage, or use the wire above its rated temperature.
- Wiring Best Practices: During wiring, crimping, and installation, avoid sharp bending, excessive stretching, heavy extrusion, or friction of the wire. Such actions can damage the insulation layer and break the conductor.
- Connection Quality: Use matching professional terminals and connectors for crimping or welding operations. Ensure the connection is firm and reliable to prevent poor contact, overheating, and short circuit faults.
- Intended Use: This product is only suitable for internal fixed or semi-fixed wiring of electrical equipment and battery modules. It is not designed or allowed for use as outdoor exposed wires or mobile power connection wires.
5. Maintenance
Regular maintenance ensures the longevity and safety of your electrical wiring. Consider the following:
- Periodically inspect the wire for any signs of wear, cracks, or damage to the insulation.
- Ensure connections remain secure and free from corrosion. Re-crimp or re-solder if necessary.
- Keep the wiring area clean and free from dust, debris, and moisture to prevent insulation degradation.
- Avoid exposing the wire to harsh chemicals or extreme mechanical stress that could compromise its integrity.
6. Troubleshooting
If you encounter issues with your wiring, consider these general troubleshooting steps:
- No Power/Intermittent Power: Check all connections for tightness and proper contact. Ensure the wire is not broken or severely bent. Verify the power source is functioning correctly.
- Overheating: If the wire feels excessively hot, immediately disconnect power. This could indicate an overload, a short circuit, or improper gauge selection for the current load. Consult a professional electrician.
- Visible Damage: If the insulation is damaged or the conductor is exposed, immediately replace the affected section of wire. Do not attempt to repair damaged insulation with tape, as this is a fire and shock hazard.
- System Malfunction: If the electronic equipment or 3D printer is malfunctioning, and you suspect the wiring, ensure all connections are correct according to the equipment's diagram. If the problem persists, consult the equipment's manual or a qualified technician.
7. Storage & Transportation Requirements
Proper storage and transportation are crucial to maintain the wire's quality and performance:
- Storage Environment: Store the product in a dry, ventilated, cool, and clean indoor environment. Avoid direct sunlight, rain, moisture, and oil pollution.
- Stacking: The stacking height shall not exceed 5 layers to prevent extrusion deformation of the wire coils.
- Transportation: During transportation, use moisture-proof and shock-proof outer packaging. Avoid severe collision, extrusion, and exposure to harsh conditions. Comply with the transportation regulations for general non-hazardous chemical and electrical products.
8. Specifications
Detailed specifications for the 1332 High Temperature FEP Wire are provided below. Note that data is manually measured and for reference only, with an outer diameter tolerance of ±0.2mm.
| Property | Value |
|---|---|
| Does it include wireless functionality? | No |
| Does it include a Battery? | No |
| Voltage (General) | 81-600V (including 600V) |
| Structure | Without modular telephone connectors |
| Use | Not Telecommunication |
| High-concerned chemical | None |
| Insulation Material | Fluoroplastic (FEP) |
| Origin | Mainland China |
| Conductor | Tinned copper |
| Rated Voltage (from product properties) | 300V |
| Temperature Range (from product properties) | -60℃ - +200℃ |
For a comprehensive user manual in PDF format, please refer to the User Manual (PDF).
9. User Tips
Based on general usage and product characteristics, here are some tips for optimal performance:
- When working with 3D printers or other sensitive electronic equipment, always double-check your wiring against the device's specific diagrams to ensure correct connections and prevent damage.
- Utilize the various color options to color-code your wiring, which can significantly simplify installation, troubleshooting, and future maintenance.
- Despite its high temperature resistance, ensure adequate ventilation around wired components to prevent heat buildup, which can affect overall system performance and longevity.
- For applications requiring precise lengths, measure carefully before cutting, as FEP insulation can be slightly more challenging to strip cleanly than other materials.
10. Warranty & Support
For any questions regarding the product, technical support, or warranty claims, please contact the seller directly. Keep your purchase records for reference.
Manufacturer: Shenzhen Tianshen Technology Co., Ltd
Contact: Email: shenzhenskygod@163.com, Tel: +86-13076627676
EU Authorized Representative: ECLAT SOLUTION SARL
Contact: Email: eclatsolution@outlook.com, Tel: +33 187652619