1. Introduction
Thank you for choosing the NOCCLILI Instant Heating Tankless Electric Water Heater Tap. This appliance provides instant hot water directly from your tap, featuring a digital temperature display for convenience and safety. Please read this manual thoroughly before installation and use to ensure proper operation and to prevent injury or damage.
2. Important Safety Information
WARNING:
- To avoid danger of suffocation, keep any plastic packaging bags away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. Please reuse or recycle this bag.
- Ensure the product is installed by a qualified professional to prevent electrical hazards.
- Do not operate the appliance if the power cord or plug is damaged.
- Do not immerse the appliance or its electrical components in water or other liquids.
- Always ensure the water supply is connected and flowing before turning on the heating function.
- This appliance is designed for indoor use only.
3. Product Components
Familiarize yourself with the parts of your electric water heater tap:

- Water Nozzle: Where water exits.
- Rotating Faucet: Allows 360° rotation for convenience.
- Electroplated Body / ABS Body: The main housing of the tap.
- Digital Display Screen: Shows the current water temperature.
- Power Cord: Connects the tap to the electrical supply.
- Water Flow Switch: Lever to control water flow and temperature (hot/cold).
- Ceramic Valve Core: Controls water flow and mixing.
- Temperature Sensor Chip: Detects water temperature for display.
- Heating Tube: The element responsible for heating the water instantly.
- Installation Assemblies: Components required for mounting the tap to the sink/countertop.
4. Specifications
Technical details of your electric water heater tap:

| Feature | Detail |
|---|---|
| Item Name | Electric Water Faucet |
| Product Material | ABS + Stainless Steel |
| Thermal Water Temperature Range | 30°C ~ 60°C |
| Power Cord Gauge | 1.1m long, 1.5mm² |
| Work Water Pressure | 0.15 ~ 0.6 MPa |
| Waterproof Grade | IPX4 |
| Rated Voltage | 220V / 50Hz |
| Rated Power | 3000W |
| Power Source | AC |
| Origin | Mainland China |
Dimensions:

- Overall Height: Approximately 19.5 cm
- Faucet Spout Width: Approximately 18.5 cm
- Base Diameter: Approximately 6.5 cm
5. Installation Instructions
Professional installation is highly recommended. Ensure all local plumbing and electrical codes are followed.
5.1 Before Installation
- Turn off the main water supply and electrical power to the installation area.
- Ensure you have all necessary tools (wrench, screwdriver, sealant tape, etc.).
- Inspect the product for any damage.
5.2 Installation Steps
- Mount the Tap: Insert the tap base into the mounting hole on your sink or countertop. Secure it from underneath using the provided installation assemblies (washers, nuts).
- Connect Water Supply: Connect the hot and cold water supply lines to the corresponding inlets on the tap. Use sealant tape on threaded connections to prevent leaks.
- Connect Electrical Power: Have a qualified electrician connect the power cord of the tap to a dedicated 220V/50Hz electrical circuit with appropriate grounding and circuit protection.
- Check for Leaks: Slowly turn on the main water supply and check all connections for leaks. Tighten if necessary.
- Prime the Unit: Before turning on the electricity, open the tap and let water flow through it for a few minutes to ensure the heating chamber is full of water and to purge any air.
- Restore Power: Once water is flowing steadily and there are no leaks, restore electrical power.

5.3 Water and Electricity Separation
This tap features a water and electricity separation design for enhanced safety, preventing water leakage from affecting electrical components and vice-versa. The internal waterways and circuit areas are fully partitioned.

6. Operating Instructions
6.1 Basic Operation
- Turn On Water: Move the water flow switch lever to the desired position (cold or hot).
- Adjust Temperature: For hot water, move the lever towards the 'Hot' indicator. The heating element will activate instantly, and the digital display will show the water temperature. For cold water, move the lever towards the 'Cold' indicator.
- Digital Display: The integrated digital display shows the real-time water temperature, typically ranging from 30°C to 60°C when heating.
- Turn Off Water: Return the lever to the central 'Off' position to stop water flow.

6.2 Instant Heating Feature
The tap is equipped with a high-power heating tube that provides hot water instantly, eliminating the need to wait for water to heat up.

6.3 Rotatable Faucet
The faucet can be rotated 360 degrees, providing flexibility and ease of use for various sink tasks and cleaning.

7. Maintenance and Care
- Cleaning: Clean the exterior of the tap with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Descaling: In areas with hard water, mineral deposits may accumulate. Periodically clean the water nozzle and heating element (if accessible and safe to do so, consult a professional) to maintain optimal performance.
- Inspection: Regularly check the power cord and water connections for any signs of wear, damage, or leaks. Address any issues immediately.
- Winterization (if applicable): If the tap is in an area subject to freezing temperatures, ensure the water supply is drained to prevent damage from freezing.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot water | No power; Water pressure too low; Heating element fault | Check power supply/breaker; Ensure adequate water pressure (0.15-0.6 MPa); Contact service if element fault suspected. |
| Water is not hot enough | Water flow too high; Low incoming water temperature; Mineral buildup | Reduce water flow; Ensure incoming water is not excessively cold; Descale the unit. |
| Water leakage | Loose connections; Damaged seals/components | Tighten water supply connections; Inspect and replace damaged seals/components (professional service recommended). |
| Digital display not working | No power; Sensor fault | Check power supply; Contact service if sensor fault suspected. |
For issues not listed or if solutions do not resolve the problem, please contact customer support.
9. Warranty and Support
This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, service, or warranty claims, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.