OLOIU BM9279424

Contents

OLOIU 6.5" CID65 LCD Display Instruction Manual

Model: BM9279424

1. Introduction

This manual provides essential information for the safe and effective use of your OLOIU 6.5" CID65 LCD Display, model BM9279424. This display is designed as a replacement screen for various BMW and Mini Cooper models, enhancing your vehicle's GPS navigation, radio, and infotainment systems. Please read this manual thoroughly before installation and operation.

2. Safety Warnings

Your safety and the proper functioning of the device are paramount. Adhere to all warnings and instructions to prevent personal injury, traffic accidents, or product damage.

Important Statement

This product has passed EU CE Certification, complying with EU Low Voltage Directive, RoHS Environmental Protection Directive, EMC Directive, and relevant safety standards for automotive electronics. Please read all safety warnings and operating instructions carefully before use to avoid personal injury, traffic accidents, or product damage.

Safety Warning Symbols & Instructions

Symbol Warning Level Meaning Notes
⚠ Danger Electric Shock Hazard Do not disassemble or modify the wiring privately, and do not touch live internal components.
⚠ Warning High Temperature & Fire Hazard Keep away from high heat sources and open flames. Do not block cooling vents to prevent overheating and fire.
⚠ Warning Water & Moisture Proof Non-waterproof design. Strictly prohibit splashing water, damp, and direct wiping with wet cloth.
⚠ Danger Driving Distraction Hazard Do not operate the screen or watch videos while driving to avoid traffic accidents.
⚠ Caution General Caution Follow operating specifications. Improper use may cause product damage or minor personal injury.
⛔ Prohibition Prohibited Operations Do not disassemble, modify or reverse wiring privately, otherwise CE certification will be invalid and warranty void.

3. Setup and Installation

Proper installation is crucial for the display's functionality and your vehicle's safety. It is highly recommended that installation be performed by a qualified professional.

  • Installation, wiring, and cabling must be completed by professional automotive electricians.
  • Ensure the power cord and rear view camera cable (if applicable) are connected properly.
  • Incorrect wiring can lead to equipment failure and vehicle battery drain.

Power Supply Adaptation

  • This device is only applicable to a 12V DC vehicle power supply.
  • Strictly prohibit connecting to a 24V truck power supply or household 220V power supply to avoid circuit burnout and short circuit.

Installation Position

  • Ensure the installation position does not affect the deployment of vehicle airbags to prevent equipment splashing and injury in accidents.
  • Do not block the cooling vents of the device.
Rear view of the LCD display, showing the circuit board and connections.
Figure 1: Rear view of the LCD display, showing the circuit board and connections. This image illustrates the complexity of the internal wiring, emphasizing the need for professional installation.
Close-up of the ribbon cable connector on the display's circuit board.
Figure 2: Close-up of the ribbon cable connector on the display's circuit board. Proper connection of this cable is vital for display functionality.

4. Operating Instructions

No Operation While Driving

  • Drivers are prohibited from operating the display, watching videos, or adjusting parameters while the vehicle is moving.
  • All operations must be performed when the vehicle is parked and the handbrake is applied.
  • Strictly abide by EU road traffic regulations to avoid distracted driving.

Daily Usage Notes

  • Adjust the screen brightness properly to avoid strong light reflection affecting driving vision at night.
  • The rear view camera is only an auxiliary function and cannot completely replace rearview mirror observation.
  • Avoid severe vibration, extrusion, or falling of the device to prevent screen cracking.
  • When the vehicle is parked for a long time, turn off the display power to avoid vehicle battery drain.

5. Maintenance

Standard Cleaning and Maintenance

  • Turn off the device power before cleaning.
  • Gently wipe the screen and body with a dry, soft cotton cloth.
  • Do not use alcohol, detergent, or other liquids to wipe directly.

Reasonable Use Environment

  • Avoid long-term direct sunlight on the screen.
  • Keep the device away from high-temperature air vents.
  • The optimal operating temperature range is -20°C to 70°C.
  • Maintaining these conditions helps prevent screen aging and touch failure.

6. Troubleshooting

Emergency Handling for Abnormal Conditions

If the device exhibits any of the following abnormalities, immediately cut off the power, stop using it, and contact after-sales service. Do not attempt to repair it yourself.

  • Smoke emission
  • Abnormal noise
  • Overheating
  • Screen blur
  • Screen flickering or other display abnormalities

7. Specifications

Attribute Value
Brand Name OLOIU
Model Name BM9279424
Item Type Car Monitors
Placement In-Dash
Item Size 6.5 inches
Item Weight 200g
Origin Mainland China
High-concerned chemical None

Package Dimensions

  • Length: 22 cm
  • Width: 16 cm
  • Height: 7 cm
  • Weight: 0.2 kg
Front view of the 6.5-inch LCD display.
Figure 3: Front view of the 6.5-inch LCD display, showcasing its design and dimensions.

8. User Tips

  • Always ensure the vehicle is stationary and the handbrake is engaged before attempting any screen operations or adjustments.
  • For optimal visibility, adjust the screen brightness according to ambient light conditions, especially when driving at night.
  • Consider professional installation to ensure correct wiring and prevent potential damage to the display or vehicle's electrical system.
  • Regularly clean the screen with a dry, soft cloth to maintain clarity and responsiveness.

9. Frequently Asked Questions (FAQ)

Q: Can I install this display myself?

A: While technically possible for experienced individuals, professional installation by an automotive electrician is strongly recommended to ensure correct wiring and prevent damage to the device or vehicle.

Q: Is the display waterproof?

A: No, the display is not waterproof. Avoid splashing water, damp conditions, and do not clean with wet cloths or liquids.

Q: What should I do if the screen becomes blurry or unresponsive?

A: Immediately cut off power to the device and contact after-sales service. Do not attempt to repair it yourself.

10. CE Compliance and Disposal

CE Compliance Instructions

  • This product complies with EU EN 62368-1, RoHS 2.0, EMC, and automotive electronics safety standards, and can be legally sold in the EU and regions recognizing CE certification.
  • Unauthorized private disassembly, modification, and illegal use will invalidate the CE certification and product warranty, and the user shall bear relevant safety responsibilities.

Product Waste Disposal

  • The product waste disposal complies with EU WEEE Directive.
  • Do not discard with household garbage.
  • It shall be handed over to professional electronic waste recycling institutions.

For a detailed user manual, please refer to the official PDF document: User Manual (PDF).

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact details.

Child Safety Protection

  • Place the device and accessories out of children's reach.
  • Prevent children from eating accessories, winding wires, or operating without permission.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.