VENDY ForTwo 451 Coupe 2007-2014

Contents

VENDY Front & Rear Wiper Blades Set User Manual

For Smart ForTwo 451 Coupe (2007-2014)

1. Introduction

This manual provides instructions for the installation, operation, maintenance, and troubleshooting of your VENDY Front & Rear Wiper Blades Set. These upgraded intelligent boneless wipers are designed to provide clear visibility and stable operation for your Smart ForTwo 451 Coupe manufactured between 2007 and 2014.

The wiper blades feature tension memory for even pressure distribution, a specially blended rubber for smooth, chatter-free wiping, and an aerodynamic design to reduce drag, noise, and wind lift. They are also designed to prevent ice and snow build-up on metal/plastic components.

2. Warning & Safety Information

  • Sharp Edges: Always wear protective gloves when installing or replacing wiper blades to avoid injury from sharp edges.
  • Dry Operation: Do not operate the wiper blades at high speed on dry glass surfaces, as this can cause damage to the wiper blades and the windshield.
  • Wiper Arm Handling: Do not pull the wiper arm directly with your hands, as this may cause breakage.

3. Specifications

Feature Description
Product Name Upgraded Intelligent Boneless Wiper
Brand VENDY
Placement Front & Rear Windshield
Material High-grade Natural Rubber
Temperature Tolerance +158℉ to -40℉ (-40℃ to +70℃)
Lifespan 1 Million Times of Wiping
Interface Type Special Vehicle Interface
Item Weight 0.35 kg
Package Dimensions (L x W x H) 52 cm x 28 cm x 7 cm
Package Weight 0.356 kg

Wiper Size Chart

Wiper Size Chart showing inches and corresponding millimeters
Figure 1: Wiper Size Chart (Inch and Millimeter equivalents)

The set includes blades of 23", 21", and 10" for front and rear windshields.

Wiper Blade Components

Diagram of wiper blade components including special vehicle interface, wind resistance guide, memory elastic steel sheet, and natural silicone strip
Figure 2: Wiper Blade Component Diagram

The wiper blades feature a Special Vehicle Interface, Streamlined Wind Resistance Guide, Memory Elastic Steel Sheet, and Natural Silicone Strip for optimal performance.

Adaptation Interfaces

Image showing various wiper blade adaptation interfaces (A1, B5, B2, B1, B7, B11, E, C, F, H)
Figure 3: Various Wiper Blade Adaptation Interfaces

The wiper blades are designed to match standard original car wiper interfaces and sizes, making them 99% applicable to various vehicles.

4. Setup & Installation

Compatibility Note: These wiper blades are only suitable for left-hand drive vehicles. Please confirm your vehicle's model and year before installation.

For a visual guide, please refer to the installation video below:

Video 1: Wiper Blade Installation and Performance Demonstration

Front Wiper Installation Steps

  1. Lift the wiper arm away from the windshield.
  2. Align the mounting clip of the new wiper blade with the wiper arm.
  3. Gently press the wiper blade into place until it clicks securely.
  4. Ensure the blade is firmly attached before lowering the wiper arm.
Step-by-step visual guide for installing the front wiper blade
Figure 4: Front Wiper Installation Steps

Rear Wiper Installation Steps

  1. Lift the rear wiper arm.
  2. Remove the old wiper blade by detaching it from the arm.
  3. Attach the new rear wiper blade to the arm, ensuring it is securely fastened.
  4. Lower the wiper arm back into position.
Step-by-step visual guide for installing the rear wiper blade
Figure 5: Rear Wiper Installation Steps

5. Operating Instructions

Your VENDY wiper blades are designed for high cleaning efficiency, effectively removing rainwater and dirt from your windshield. The stable operation, ensured by secure installation, minimizes vibration for a smooth wipe.

Image comparing clear visibility with VENDY wipers versus vague visibility with old wipers
Figure 6: Clear Visibility with VENDY Wipers
Image highlighting the double carbon steel bar for traceless wiping
Figure 7: Double Carbon Steel Bar for Traceless Wiping
Image comparing noise levels of wipers: Very Quiet (0 dB), Product Operation (20 dB), Normal Conversation (40 dB), Bit Noisy (60 dB)
Figure 8: Silent Operation Comparison

The aerodynamic design reduces wind resistance, ensuring no water marks are left behind, even during high-speed driving.

Diagram illustrating the aerodynamic design of the wiper blade
Figure 9: Aerodynamic Design

6. Maintenance

It is recommended to replace your wiper blades every 6-12 months, or immediately if you notice skipping, abnormal noise, or streaking during operation.

Cleaning Method

Wipe the rubber strip with a soft cloth dampened with neutral detergent. Do not use gasoline or alcohol, as these can damage the rubber material.

Ice Removal

If ice forms on the wiper blades after use, ensure you remove the ice layer before operating them to prevent damage.

Storage Conditions

  • Store the wiper blades in a cool, dry place.
  • Keep them away from direct sunlight and high-temperature environments (above 60°C).
  • When not in use, cover the wiper blades with a protective sleeve to prolong their lifespan.

Precautions

  • Do not wipe the rubber strip with corrosive cleaning agents.
  • Wiper blades are not suitable for non-glass surfaces.
  • When replacing, always select the original equipment manufacturer (OEM) specification and model to ensure proper fit and performance.

7. Troubleshooting

Common Issues and Solutions

  • Wiper Skipping: This may be caused by rubber strip aging or an oily film on the glass. Clean the windshield thoroughly and inspect the wiper blade for wear. If worn, replace the blade.
  • Excessive Noise: Check for foreign objects lodged in the wiper blade or arm, or for deformation of the rubber strip. Remove any obstructions or replace the blade if deformed.

8. User Tips

  • Compatibility Check: While listed for 2007-2014 Smart ForTwo 451 Coupe models, some users have reported that the product may not fit specific 2014 Smart ForTwo 451 models. It is advisable to double-check the exact fitment for your 2014 model before purchase or installation.
  • Pre-Installation Cleaning: Before installing new wiper blades, clean your windshield thoroughly to remove any dirt, grime, or oily films that could affect the performance of the new blades.

9. Warranty & Support

For specific warranty information, please refer to the seller's terms and conditions at the time of purchase. This product is CE marked, indicating compliance with the essential requirements of relevant EU directives concerning safety, hygiene, and environmental protection.

A detailed user manual in PDF format is also available for download: View User Manual (PDF).

© 2024 VENDY. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.