Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Jaxcam 5MP 2K HD Floodlight WiFi Camera. Please read this manual thoroughly before use to ensure proper functionality and safety.
For additional guides and documents, you can refer to the User manual (PDF).
Safety Information and Compliance
Disclaimer:
⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
FCC Compliance Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures:
- Reorient or reposition the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important:
Changes or modifications not expressly approved by the manufacturer responsible for compliance may cause the user to lose operation or may cause the user to lose the right to operate the equipment.
Product Overview
The Jaxcam Floodlight WiFi Camera is a versatile outdoor security device combining a 5MP Ultra HD camera with dual high-lumen LED lights, a Wi-Fi amplifier, and a sound speaker. It offers comprehensive surveillance with advanced features like human detection, two-way audio, and music playback.
Figure 1: Jaxcam 5MP 2K HD Floodlight WiFi Camera
Key Features:
- 5MP Ultra HD Video: Captures clear and detailed footage.
- Dual High-Lumen LED Lights: Provides bright illumination for monitoring and lighting.
- Built-in High-Power Speaker: Enables clear two-way audio communication and music playback.
- Full-Color Night Vision: Enhanced visibility in low-light conditions when the white LED light is on.
- IP66 Waterproof & Dustproof: Designed for reliable outdoor use in various weather conditions.
- Intelligent Motion Detection & Alerts: Detects human movement, tracks subjects, and sends alerts.
- P2P Remote Viewing: Access live footage anytime, anywhere via the SightSys app.
- Flexible Storage Options: Supports up to 128GB TF card for local storage and cloud storage service (additional cost).
- Wi-Fi Connectivity: Stable 2.4GHz WiFi connection.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Jaxcam |
| Style | Flood Light Camera |
| High Definition | 5.0 Megapixels (2K HD) |
| Megapixels | 5 MP |
| Lens (mm) | 3.6mm |
| Lens Quantity | Single Lens |
| Connectivity | WIFI (2.4GHz) |
| Power Supply | Normal |
| Supported Operating Systems | Windows 10 |
| IP Rating | IP66 |
| Movement Range (Pan) | 0°-360° |
| TF Card Support | Up to 128G TF Card (Micro SD, not included) |
| Features | Wifi Camera, Ip Camera |
| Origin | Mainland China |
Figure 2: Key features of the 3-in-1 camera.
Package Contents
Upon opening the package, please verify that all items are present and in good condition:
- Jaxcam 5MP 2K HD Floodlight WiFi Camera
- Power Adapter (EU/US/UK/AU Plug, depending on selection)
- Mounting Screws and Anchors
- User Manual (this document)
Setup Guide
1. App Download and Installation (Carecam Pro)
- Scan the QR code provided on the manual cover or search for "Carecam Pro" in your device's app store (Google Play Store or Apple App Store).
- Download and install the "Carecam Pro" application.
- Register for an account and log in to the app.
2. Wireless Connection with Camera
- Power on the camera. Wait for 10-15 seconds until you hear the "Welcome to use!" prompt.
- Press and hold the "RESET" button for 3 to 5 seconds. Release the button after hearing a "ding" sound.
- Wait for the camera to restart.
- In the Carecam Pro app interface, click the "+" icon and select "Add Device".
- Confirm that the camera is a "WiFi camera" type.
- Select "Device Scan Code" and confirm you hear the "Welcome to use" prompt.
- Select your 2.4GHz WiFi network name and enter the WiFi password. Click "Connect wi-FI". (Note: This step is not required for 4G cameras).
- Point your phone's QR code directly at the camera lens. The camera will send an "OK" message, indicating successful configuration.
- Tap "I heard the OK prompt" in the app.
- Wait for the camera configuration to complete.
Figure 3: Wireless Controls Setup
3. TF Card Recording Settings
- Disconnect the device from the power supply. Carefully insert the TF card (Micro SD, not included, up to 128GB) into the card slot, paying attention to the card's direction.
- Reconnect the power supply to the device.
- In the Carecam Pro app, navigate to the device list, click the device's settings icon (⚙️).
- Select "Memory Card", then "Format" the TF card.
- Go back to the settings interface.
- Select "Timed Recording", turn the "Switch" on, choose your desired recording time period, and click "Save".
Figure 4: SD Card and Cloud Storage Options
4. Cloud Storage Video Setup
To utilize cloud storage, click the cloud recording icon (☁️) in the app. You can purchase a suitable cloud storage package. After successful purchase, the cloud storage icon will illuminate next to the device name in the device list.
Note: To use the "Event Storage" package, ensure that "Motion Detection" or "Human Detection" functions are enabled in the alarm settings.
5. PC Viewing Guide
- PC Software Download: Open a web browser on your computer and go to http://yyp2p.cn/care. Click "Care PC" to download and install the software.
- Log in to the Client: Install the client on your computer. Double-click to open it, then enter the account and password registered with your mobile app. Click "Login" to view all devices under your account.
Figure 5: Remote Real-Time Access across devices
Operating Instructions
1. Two-Way Audio
The camera is equipped with a microphone and speaker, allowing for clear two-way audio communication. You can talk to individuals near the camera and hear their responses through the app on your smartphone or tablet.
Figure 6: Two-Way Audio Communication
2. Music Playback
Utilize the built-in high-power speaker to play music directly from your mobile app or via a TF card (if inserted). This feature can be used for entertainment or to deter unwanted visitors.
Figure 7: Music Playback Feature
3. Motion Detection and Alerts
The camera features intelligent motion detection, including human detection. When movement is detected in the alarm area, the camera will track the person and send alerts to your connected device via the Carecam Pro app.
Figure 8: Motion Detection in action
4. Night Vision
The camera supports full-color night vision. When the dual white LED lights are activated, the camera will display a clear, illuminated vision at night, enhancing security and visibility in dark conditions.
Figure 9: 5W LED Light for Night Vision
Figure 10: Day and Night Vision Comparison
Maintenance
- Cleaning: Regularly wipe the camera lens and LED lights with a soft, damp cloth to ensure clear vision and optimal light output. Avoid abrasive cleaners.
- Firmware Updates: Check the Carecam Pro app periodically for firmware updates to ensure your camera has the latest features and security enhancements.
- Connection Check: Periodically verify the Wi-Fi connection strength and stability through the app.
- Physical Inspection: Inspect the camera's mounting and cables for any signs of wear or damage, especially after severe weather conditions.
Figure 11: IP66 Waterproof and Temperature Resistance
Troubleshooting
Connection Issues (App/PC)
If the camera cannot connect normally to the app or PC client, please check the following:
- Ensure your router is properly connected and powered on.
- Verify that your Wi-Fi network is not disabled or hidden.
- Confirm that your Wi-Fi network name does not contain Chinese characters or other special characters.
- Ensure your router is operating on a 2.4GHz network and does not support 5GHz networks for camera connection.
Interference Issues (FCC Guidelines)
If this equipment causes harmful interference to radio or television reception, try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
Other Common Issues
- Camera Not Powering On: Check the power adapter and cable connections. Ensure the power outlet is functional.
- No Audio/Poor Audio Quality: Ensure the microphone and speaker settings are enabled in the app. Check for any obstructions around the speaker/microphone.
- Motion Detection Not Working: Verify that motion detection and human detection settings are enabled in the app's alarm settings. Adjust sensitivity if necessary.
- TF Card Not Recording: Ensure the TF card is correctly inserted and formatted within the app. Check if "Timed Recording" is enabled and configured.
Warranty and Support
This product comes with a 3-year warranty from its original purchase date, covering defects in workmanship and materials under normal use. Any unit which proves defective during the warranty period will be repaired without charge for parts or replacement.
For technical support or warranty claims, please contact the seller or refer to the official Carecam Pro support channels.