1. Introduction
This manual provides essential information for the safe and effective use, maintenance, and care of your MT HELMETS JARAMA motorcycle helmet. Please read this manual thoroughly before using your helmet and retain it for future reference.
2. Safety & Compliance
2.1. WARNING
This product is a retro full-face helmet, designed to provide comprehensive protection. However, it is crucial to understand its limitations:
- This helmet is designed for adult head circumferences (55-60 cm). Individuals with head sizes outside this range must choose a helmet of the appropriate size.
- If the helmet shell shows cracks, dents, if the interior padding is damaged, or if buckles/goggle components are loose, you must immediately stop using and replace the helmet. A damaged helmet offers no protective capability.
- This helmet is strictly prohibited for use in professional racing, off-road riding, high-speed racing (speeds >60 km/h), or extreme sports. The impact forces in such scenarios far exceed the helmet's protective limits.
- Do not modify the helmet (e.g., drilling holes, attaching rigid accessories). Do not install devices such as headphones or cameras on the helmet, as this may compromise its structural integrity and protective performance.
2.2. Safety Information
- Proper Wear: Before riding, always securely fasten the double D-ring buckle, ensuring the helmet fits snugly on your head. If the helmet feels loose or shifts during riding, stop immediately to adjust it. Never operate the buckle with one hand while riding.
- Service Life: The protective performance of a helmet is effective for 3-5 years from the date of purchase. It must be replaced periodically, even if undamaged, as the interior impact-absorbing materials degrade over time.
- Complementary Protection: Always use this helmet in conjunction with other protective gear such as goggles, riding jackets, and knee guards. This helmet is not a substitute for other necessary protective equipment.
3. Product Features
The MT HELMETS JARAMA helmet is engineered with advanced features for safety and comfort:
- Certifications: ECE R22.06, DOT Certified, 3C Certified.
- Fit: Asian-Fit design for enhanced comfort.
- Visor: Quickshift Visor mechanism for easy changes.
- Interior: Multiples Fabrics, Glasses Slot, EPS Buffer Layer, Retro Interior, Removable Lining.
- Retention System: Double D buckle for secure fastening.
- Ventilation: Tail Vent system for airflow.
- Audio Integration: Bluetooth Headphone Slot.
- Shell Material: High-performance ABS shell.
3.1. Detailed Features

3.2. Advanced Protection

The helmet features an EPS hierarchical design optimized for Asian head circumferences. This design, combined with MT's multi-track tests, ensures the outer EPS absorbs kinetic energy, and the inner EPS reduces displacement. The dual EPS system improves safety. The ECE22-06 certification signifies enhanced security, with rigorous testing of the helmet, visor, and accessories under various impact scenarios, including high-speed, low-speed, and oblique impacts.
4. Setup & Wearing Instructions
4.1. Pre-Wearing Preparation
- Helmet Condition Check: Inspect the shell for cracks, paint chips, or deformation.
- Ensure the goggles have no scratches or looseness.
- Check that the interior lining is clean and undamaged.
- Verify that the double D-ring buckle functions properly.
4.2. Wearing Procedure
- Fit Confirmation: If equipped with adjustable padding, adjust its thickness according to your head circumference to ensure a snug, comfortable fit without pressure points.
- Putting on the Helmet: Hold the helmet by both sides with your hands. Slide it slowly over your head from the top, aligning the front edge 1-2 cm above your eyebrows and ensuring the back edge conforms to the nape of your neck.
- Fastening the Buckle: Thread the strap through both metal D-rings, then back through the inner D-ring. Pull it tight until only one finger can fit between the strap and your chin, ensuring the helmet does not move.
5. Usage Limitations
5.1. Scenario Restrictions
- Recommended Scenarios: Suitable only for low-speed (≤50 km/h) scenarios such as urban commuting and casual riding.
- Prohibited Scenarios: Professional racing tracks, off-road riding, high-speed racing (speeds >60 km/h), long-distance motorcycle tours, and environments with poor visibility such as heavy rain or fog.
5.2. Environmental & Maintenance Restrictions
- Avoid prolonged use in heavy rain or standing water, as a damp lining will compromise its shock-absorbing properties.
- Do not use the helmet in extreme temperatures above 60°C (140°F) or below -10°C (14°F).
- Do not clean the shell with organic solvents (e.g., gasoline, alcohol).
- Do not machine wash the interior lining.
- Do not store the helmet in direct sunlight or near heat sources to prevent material degradation and deformation.
6. Care & Storage Instructions
6.1. Cleaning
- Shell: Wipe off dirt with a damp cloth and allow it to air dry naturally.
- Interior Lining: If removable and washable, detach it and hand wash using a mild detergent. Allow it to air dry completely before reattaching. Avoid direct sunlight during drying.
6.2. Storage
- Store the helmet in a dry, well-ventilated indoor area.
- Avoid placing heavy objects on it or contact with sharp objects.
- It is recommended to store it on a helmet stand or by hanging it to prevent shell deformation.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand Name | MT HELMETS |
| Model | JARAMA |
| Item Type | Helmets |
| Helmet Style | Full Face |
| Helmet Material | ABS |
| Weight | 1.4 kg |
| Quality Certificate | ECE-R22/06, DOT, 3C |
| Certification | E-Mark |
| Gender | Unisex |
| Origin | Mainland China |
| High-concerned chemical | None |
7.1. Size Chart

| Helmet Size | S | M | L | XL | XXL | XXXL | XXXXL |
|---|---|---|---|---|---|---|---|
| Snug fit | 57 | 58 | 59 | 60 | 61 | 62 | 63 |
| Moderate | 56 | 57 | 58 | 59 | 60 | 61 | 62 |
| Loose | 55 | 56 | 57 | 58 | 59 | 60 | 61 |
8. User Tips
- Always ensure your helmet fits snugly. A loose helmet can be dangerous.
- Regularly check the D-ring buckle for proper function before each ride.
- Consider purchasing additional visor colors for different lighting conditions, as the helmet typically comes with a clear visor.
- For optimal protection, replace your helmet every 3-5 years, even if it appears undamaged.
- Pair your helmet with other protective gear like riding jackets and knee guards for comprehensive safety.
9. Frequently Asked Questions (FAQ)
- Q: Can I use this helmet for high-speed racing?
- A: No, this helmet is strictly prohibited for professional racing, off-road riding, high-speed racing (speeds >60 km/h), or extreme sports. It is designed for low-speed scenarios like urban commuting and casual riding.
- Q: How often should I replace my helmet?
- A: The protective performance of a helmet is effective for 3-5 years from the date of purchase. It must be replaced periodically, even if undamaged, as the interior impact-absorbing materials degrade over time.
- Q: Can I attach a camera or headphones to my helmet?
- A: It is not recommended to modify the helmet or install devices such as headphones or cameras, as this may compromise its structural integrity and protective performance.
- Q: How do I clean the interior lining?
- A: If the lining is removable and washable, detach it and hand wash using a mild detergent. Allow it to air dry completely before reattaching, avoiding direct sunlight.
10. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.
User Manual (PDF): For a detailed PDF version of the user manual, please refer to the official document: View User Manual (PDF)