1. Introduction
This manual provides essential information for the safe and efficient use of your POCKETMAN USB Rechargeable LED Headlamp. Designed for versatility and durability, this headlamp is an ideal lighting solution for outdoor activities, work tasks, and emergency situations. Please read this manual thoroughly before first use and keep it for future reference.

2. Package Contents
Please check the package for the following items:
- 1 x LED Headlamp
- 1 x USB Charging Cable (Type-C)
- 1 x Adjustable Headband
3. Product Overview
The POCKETMAN LED Headlamp features a dual light source design and multiple functionalities for diverse lighting needs.

Key Components:
- 5-LED Spotlight: For long-distance, concentrated illumination.
- COB Floodlight: Provides wide-area, soft illumination, including red light modes.
- Power Button: To turn the headlamp on/off and cycle through modes.
- Mode Button (or Sensor Button): To activate motion sensor or switch between main light groups.
- USB-C Charging Port: For convenient recharging.
- Battery Indicator Lights: Shows remaining battery level.
- Adjustable Headband: Elastic and breathable for comfortable wear.
- Adjustable Lamp Head: Pivots up to 90 degrees for directional lighting.
- Magnetic Base: Allows attachment to metal surfaces for hands-free work.

4. Setup
4.1 Charging the Headlamp
Before first use, fully charge the headlamp. Use the provided USB-C cable to connect the headlamp to a USB power source (e.g., wall adapter, computer, power bank).
- The battery indicator lights will show charging status.
- Charging is complete when all indicator lights are solid.
- A full charge provides up to 10 hours of runtime on low mode.

4.2 Wearing the Headlamp
Attach the adjustable headband to the headlamp. Place the headlamp on your head and adjust the strap for a secure yet comfortable fit. The elastic, breathable headband features a non-slip texture.
4.3 Adjusting the Light Angle
The lamp head can pivot up to 90 degrees vertically to direct light exactly where needed. Additionally, the headlamp can be rotated 360 degrees horizontally when detached from the headband clip, offering versatile positioning.

5. Operating Instructions
5.1 Power On/Off and Mode Selection
The headlamp features 7 adjustable lighting modes. Press the power button to cycle through the modes:
- Single click: Long-range strong light (Spotlight)
- Single click: Long-range weak light (Spotlight)
- Single click: COB strong light (Floodlight)
- Single click: COB weak light (Floodlight)
- Long press: Dual lights on (Spotlight + COB Floodlight)
- Single click: COB red light
- Single click: COB red flash (SOS/Strobe)
To turn off the headlamp, continue pressing the power button until it cycles past the last mode, or press and hold the power button for a few seconds in any mode.

5.2 Motion Sensor Activation
The headlamp is equipped with a smart infrared induction sensor for hands-free operation. To activate the motion sensor, press the dedicated sensor button (if available, or refer to specific button on your model). Once activated, you can wave your hand within approximately 20cm of the sensor to turn the light on or off without touching the headlamp.

5.3 Using the Magnetic Base
The headlamp features a strong magnetic base, allowing it to be securely attached to metal surfaces. This is ideal for hands-free tasks such as car repairs, working in workshops, or any situation where you need directed light without wearing the headlamp.

6. Maintenance
- Cleaning: Wipe the headlamp body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Water Exposure: While the headlamp is IPX4 water-resistant, avoid submerging it in water. Dry thoroughly if it gets wet.
- Battery Care: To prolong battery life, recharge the headlamp regularly, even if not in frequent use. Avoid fully depleting the battery for extended periods.
- Storage: Store the headlamp in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlamp does not turn on. | Battery is depleted. | Charge the headlamp fully using the USB-C cable. |
| Light is dim or flickers. | Low battery level. | Recharge the headlamp. |
| Motion sensor not responding. | Sensor not activated or obstructed. | Ensure the sensor is activated (press sensor button). Clear any obstructions in front of the sensor. |
| Headlamp gets warm during use. | Normal operation for high-power LEDs. | This is normal. If it becomes excessively hot, turn it off and allow it to cool. |
8. Specifications
| Brand Name | POCKETMAN |
| Item Type | Headlamps |
| Light Source | LED (5-LED Spotlight, COB Floodlight) |
| Model of LED Beads | COB |
| Switch Mode | High/Middle/Low (7 modes including Red Light/Flash) |
| Waterproof Rating | Yes (IPX4) |
| Battery Type | LITHIUM ION (Built-in Rechargeable) |
| Nominal Voltage | 3.7 V |
| Charging Port | USB Type-C |
| Max Runtime | Up to 10 hours (on low mode) |
| Weight | Under 100g |
| Motion Sensor Distance | Approx. 20cm |
| Dimensions (approx.) | 63mm (length) x 32mm (width) |
| Certification | CCC, CE, CQC, GS, LVD, ROHS, UL |
| Purpose | Camping, Hiking, Running, Fishing, Outdoor & Emergency Use |


9. User Tips
No specific user tips from reviews or Q&A were available for this product. However, general tips for headlamp use include:
- Always carry a fully charged headlamp for outdoor activities.
- Familiarize yourself with all lighting modes before heading out.
- Use the red light mode to preserve night vision and avoid disturbing others.
- Test the motion sensor in different environments to understand its sensitivity.
10. Warranty & Support
For warranty information or technical support, please refer to the seller's policy or contact the point of purchase. Keep your proof of purchase for any warranty claims.