1. Introduction
The LAUNCH X431 IMMO Elite is an advanced automotive diagnostic tool designed for comprehensive vehicle diagnostics and key programming. It leverages LAUNCH's diagnostic technology to provide precise test results across a wide range of vehicles.
This tool facilitates full car model and full system vehicle trouble diagnosis through wireless/USB communication between its VCI (Vehicle Communication Interface) device and the display tablet.
Key Features:
- IMMO (Immobilizer): Performs anti-theft key matching, allowing the immobilizer control system to recognize and authorize remote control keys.
- IMMO PROG (Immobilizer Programming): Reads transponder data, generates exclusive keys, and reads/writes EEPROM/MCU/ECU chip data. Requires X-PROG 3.
- Intelligent Diagnose: Uses VIN information for quick tests and access to historical diagnostic records from the cloud server, streamlining the diagnostic process.
- Local Diagnose: Guides users through step-by-step diagnostic sessions.
- Remote Diagnose: Enables instant messaging and remote diagnosis for efficient repair assistance.
- Service Function: Includes common maintenance and reset items.
- TPMS: Configures the tool for Tire Pressure Monitoring System services, requiring a separate TSGUN device.
- Diagnostic History: Provides quick access to previously tested vehicles and reports.
- Feedback: Allows submission of vehicle issues for analysis and troubleshooting.
- One-click Update: Facilitates online diagnostic software updates.
- Vehicle Coverage: Offers a quick view of supported vehicle models.
- Add-on modules: Supports optional modules like BST 360 Battery Tester, S2-2 Sensorbox, Multimeter, and Videoscope to extend functionality.
Product Overview Video
This video provides a visual overview of the Launch X431 IMMO Elite, showcasing its components and main features.

The Launch X431 IMMO Elite with its accompanying X-PROG3 key programmer and carrying cases.
2. Important Safety Precautions
To prevent personal injury, property damage, or accidental damage to the product, read all information in this section before using the tool.
DANGER
- When an engine is operating, ensure the service area is well-ventilated or use an exhaust removal system. Engine exhaust contains poisonous compounds that can cause serious injury or death.
- Use only the included battery and power adapter. Risk of explosion if the battery is replaced with an incorrect type.
- DO NOT operate the tool while driving. Have a second person assist you to avoid accidents.
WARNING
- Always perform automotive testing in a safe environment.
- Do not connect or disconnect any test equipment while the ignition is ON or the engine is running.
- Before starting the engine, place the gear lever in Neutral (manual transmission) or Park (automatic transmission) to prevent injury.
- NEVER smoke or allow sparks/flames near the battery or engine. Do not operate the tool in explosive atmospheres.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Wear ANSI-approved eye protection when testing or repairing vehicles.
- Place blocks in front of drive wheels and never leave the vehicle unattended during testing.
- Use extreme caution when working around ignition coils, distributor caps, ignition wires, and spark plugs, as these components create hazardous voltage when the engine is running.
- To avoid damaging the tool or generating false data, ensure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
- Automotive batteries contain sulfuric acid, which is harmful to skin. Avoid direct contact and keep ignition sources away from the battery.
- Keep the tool dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
- Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Store the tool and accessories in a locked area out of reach of children.
- Do not use the tool while standing in water.
- Do not expose the tool or power adapter to rain or wet conditions to prevent electric shock.
- This tool is a sealed unit with no end-user serviceable parts. All internal repairs must be done by an authorized repair facility.
- Keep the tool away from magnetic devices to prevent screen damage or data erasure.
- Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for replacement.
- Do not disconnect the battery or any wiring cables when the ignition switch is on, as this can damage sensors or the ECU.
- Do not place magnetic objects near the ECU. Disconnect power to the ECU before welding operations.
- Use extreme caution near the ECU or sensors. Ground yourself when disassembling PROM to prevent static electricity damage.
- Ensure the ECU harness connector is firmly attached when reconnecting to prevent damage to electronic elements.
- Technicians must be knowledgeable about the vehicle and its systems due to the variety of procedures, techniques, tools, and parts involved in vehicle servicing.
- The vehicle parts and the X-PROG 3 components are welded at a constant temperature.
- When welding vehicle parts with the X-PROG 3 components, the unit must be powered off and grounded.
3. Components & Controls
The diagnostic system consists of two main components: the Display Tablet and the VCI Device.
3.1 Display Tablet
The tablet serves as the central processing system, receiving and analyzing live vehicle data from the VCI device and displaying test results.

Diagram illustrating the various ports and buttons on the Display Tablet.
| No. | Item | Description |
|---|---|---|
| 1 | Microphone | For audio input. |
| 2 | Type-A USB Port | Connects to VCI for USB diagnosis, or to add-on modules (Videoscope) / USB storage. |
| 3 | Type-C USB Port | Connects to AC outlet for charging, or to PC for data exchange. |
| 4 | POWER Key | Turns tablet ON/OFF, controls LCD display. Long press for forced shutdown. |
| 5 | LCD Screen | Displays test results and user interface. |
| 6 | Speakers | For audio output. |
| 7 | Rear Camera | For capturing images. |
| 8 | Microphone | For audio input. |
3.2 VCI Connector
The VCI connector acts as a Vehicle Communication Interface, connecting to the vehicle's DLC (Data Link Connector) socket via a diagnostic cable to read vehicle data and transmit it to the tablet.
Note: Always remember to remove the VCI connector from the vehicle's DLC after use.

Diagram illustrating the VCI Connector and its indicators.
| No. | Item | Description |
|---|---|---|
| 1 | Power indicator | Illuminates red when the VCI is powered up. |
| 2 | Vehicle indicator | Illuminates green and flashes when communicating with the vehicle. |
| 3 | I/O indicator | Blue when communicating via Bluetooth; Red when connected via USB cable. |
| 4 | DB-15 diagnostic connector | Connects to vehicle's OBD II DLC via diagnostic cable. |
| 5 | USB port | Connects VCI to tablet for USB diagnosis. |
4. Setup
4.1 Initial Use
- Charging & Turning On: Use the included power adapter to charge the tablet. After charging, press the POWER button for 3 seconds to turn it on.
- Screen Layout: The bottom of the screen features Home, Recent App, VCI Connection, Screenshot, and Back buttons.
- Basic Gestures: Supports single-tap, double-tap, long press, slide, drag, and spread apart/pinch together for navigation and control.
- Change System Language: Navigate to Settings > System > Language & input > Languages to add and select your preferred language.
- Adjust Brightness: Go to Settings > Display > Brightness level and drag the slider. Reducing brightness conserves battery.
- Set Standby Time: Configure the sleep time in Settings > Display > Advanced > Sleep to save power.
Warning: Use only the included power adapter. Damage or loss from using unauthorized adapters is not covered.
4.2 Network Setup
The tablet has built-in Wi-Fi for online access, enabling tool registration, internet browsing, app downloads, email, remote diagnosis, and software updates.
- On the home screen, tap Settings > Network & Internet > WLAN.
- Slide the Wi-Fi switch to ON. The tablet will search for available wireless networks.
- Select a wireless network. If open, it connects automatically. If encrypted, enter the password.
- Once "Connected" appears, the Wi-Fi connection is complete.
Note: Disable Wi-Fi when not needed to conserve battery power.
4.3 Register & Update
New users must complete a registration process. Tap the application icon on the home screen, then tap Login to access the diagnosis software login interface.
- If you are a new user, tap New Registration on the login screen.
- Fill in the required information (marked with *).
- Enter the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope) and tap Activate.
- After successful registration, you can choose to update all available software immediately or later.
Note: The tablet has an auto-save function for login credentials. If you forget your password, tap Retrieve password and follow the on-screen instructions.
4.4 Vehicle Connection
The method for connecting the VCI device to the vehicle's DLC depends on the vehicle's configuration.
4.4.1 Preparation
- Ensure vehicle ignition is ON.
- Vehicle battery voltage should be 11-14 volts.
- Throttle is in the closed position.
- Locate the DLC (Data Link Connector), typically within 12 inches of the instrument panel, under or around the driver's side. Refer to the vehicle's service manual if needed.
4.4.2 OBD II Vehicle Connection
Use the included diagnostic cable to connect the VCI to the vehicle's DLC port. A vehicle with an OBD II management system supplies both communication and 12V power through a standardized DLC.
4.4.3 Non-OBD II Vehicle Connection
For non-OBDII vehicles, proceed as follows:

Flowchart for connecting the VCI device to a non-OBD II vehicle.
- Battery Clamps Cable (optional): If the DLC pin is damaged or has insufficient power, use the battery clamps cable to supply power from the vehicle's battery.
- Cigarette Lighter Cable (optional): Alternatively, use the cigarette lighter cable to supply power from the vehicle's cigarette lighter receptacle.
If performing diagnosis via data cable, connect one end of the data cable to the VCI and the other to the USB port of the tablet.
5. Operation
5.1 Key Immobilizer (IMMO) & Programming
This function enables anti-theft key matching, allowing the immobilizer control system to identify and authorize remote control keys. This is necessary when replacing the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery.
5.1.1 Vehicle Connection for IMMO
- For most vehicles, use the included diagnostic cable to connect the VCI to the vehicle's DLC port.
- For specific vehicles (e.g., Mercedes Benz, Volkswagen, BMW, Porsche), the X-PROG 3 is required. Use the DB15 to OBD16 diagnostic cable and the main diagnostic cable included with the X-PROG 3 immobilizer programmer.

Overview of IMMO anti-theft functions, including key programming and module cloning.
5.1.2 Immobilizer Operations (Example: BMW CAS4/CAS4+)
- Tap IMMO and select BMW to enter the software.
- Confirm the need for an IMMO Programmer by tapping OK.
- Connect the VCI, vehicle, and X-PROG3 (purchased separately) as illustrated on-screen.
- If the Anti-Theft System type is unknown, tap Intelligent Mode.
- Select CAS4/CAS4+ Anti-Theft System.
- Tap Preprocessing to read anti-theft data and perform key matching. The ECU will be upgraded, requiring online file downloads.
- Ensure vehicle power supply voltage is stable and above 13V, then tap Yes to start preprocessing.
- After successful preprocessing, tap OK.
- Return to the function menu and tap Key Learning.
- After key information is read, select an unused key position and tap Key Generated By Ignition Switch.
- Read and display the password, then tap OK.
- Place a new key close to the vehicle coil, tap OK, and wait for key generation.
- After the dealer key is successfully generated, attempt to start the vehicle.
5.1.3 Immobilizer Programming (IMMO PROG)
The X-PROG 3 is required for this operation. It offers:
- Reading transponder data (including Mercedes Benz infrared smart key) and generating exclusive keys.
- Reading/writing on-board EEPROM chip data and MCU/ECU chip data.
For detailed operations, refer to the User Manual of the X-PROG 3.

The Launch X431 IMMO Elite functions as an all-in-one key programmer and car scanner, featuring 2-year free updates and X-PROG 3 integration.
5.2 Diagnosis
The tool provides comprehensive diagnostic capabilities through various modes.
5.2.1 Intelligent Diagnose (Auto VIN)
This function uses Bluetooth communication between the tablet and VCI to automatically obtain VIN information. Once identified, the system retrieves vehicle data and guides you to the vehicle information page, bypassing manual menu selection.
- Tap Intelligent Diagnose on the Job menu to start VCI pairing.
- After pairing, the tablet reads the vehicle VIN. If found, a vehicle information screen appears.
- Tap Diagnostic to start a new diagnostic session.
- Tap Maintenance record to view historical repair records.
- If VIN access fails, an "Enter VIN" screen appears, allowing manual input or VIN recognition via camera scan.
5.2.2 Local Diagnose
In this mode, follow on-screen instructions to execute menu-driven commands. Tap Local Diagnose to access the vehicle selection page.
- VIN SCAN: Quickly access diagnostic software. Tap VIN Scan, then use camera scan or manual VIN input.
- Manual Selection: Select diagnostic software version and vehicle model manually.
5.2.3 Diagnostic Toolbar
The toolbar, located in the upper right corner, provides buttons for printing data and other controls throughout the diagnostic session.
| Name | Description |
|---|---|
| Home | Returns to Job menu screen. |
| Prints the current screen. Requires wireless printer configuration. | |
| Exit | Exits the diagnostic application. |
5.2.4 Health Report (Quick Test)
This function scans all electronic control units (ECUs) and generates a detailed vehicle health report.
- Tap Health Report on the test item selection screen.
- The system scans ECUs; fault codes appear in red, normal functions in black.
- Clear DTCs: Tap to clear existing diagnostic trouble codes. Note that clearing DTCs does not fix the underlying problem.
5.2.5 System Scan
Quickly scans installed systems on the vehicle. Tap System Scan on the test item selection screen.
5.2.6 System Selection
Manually select the test system and function step-by-step. Tap System Selection on the test item selection screen.
5.2.7 Read Fault Code
Displays detailed information of DTC records from the vehicle's control system. Tap Read Fault Code on the diagnostic function selection screen.
- Freeze Frame: View vehicle conditions recorded when an emission-related fault occurs.
- Help: View help information.
- Code Search: Search for more information about the current DTC online.
- Report: Save current data in text format. Reports are saved in Report > Health Reports.
5.2.8 Read Data Stream
View and record real-time Live Data (Parameter Identification Data - PID) for parameters and sensor information.
- Select Page/All: Select all items on the current page or all items.
- Unselect: Deselect all data stream items.
- OK: Confirm selection and proceed.
- Display Modes: Value (text list), Graph (waveform graphs), Combine (merged graphs for comparison).
- Min/Max: Define min/max values for alarms.
- Customize: Select/deselect data stream items to display/remove waveforms.
- Compare Sample: Select a sample DS file for comparison.
- Report: Save current data in text format.
- Record: Start/stop recording diagnostic data.
- Save Sample: Customize and save standard range of live data stream items as a DS sample file.
Caution: If driving is required for troubleshooting, always have a second person assist to avoid accidents.
5.2.9 Remote Diagnose
This module enables repair shops or mechanics to diagnose a remote vehicle and use instant messaging for faster repairs.
- Device-To-Device: Initiate remote diagnosis with other diagnostic tools. Request control or invite a diagnostic assistant.
- Device-To-PC: Request remote control from a PC client technician.

The tool offers OE-level bi-directional control and all-system diagnostics to pinpoint vehicle problems by testing component functionality.
5.3 Service (Reset) Functions
This module provides quick access to commonly performed maintenance and reset functions, including coding, reset, and relearn operations.

Visual representation of the 39+ reset functions available, including IMMO Reset, Gear Learning, Throttle Matching, Injector Coding, Suspension, Oil Lamp Reset, Clutch Learning, ABS Bleeding, Brake Reset, D-P/F Reg., Steering Angle, Tire Pressure, and ECU Reset.
Common Reset Functions:
- Oil Reset Service: Resets the oil life system and turns off the oil light after an oil change.
- Electronic Parking Brake Reset: Resets the brake pad after replacement.
- Steering Angle Calibration: Resets the steering angle after replacing sensors or mechanical parts, or after alignment.
- ABS Bleeding: Performs bi-directional tests to check ABS operating conditions and bleed air.
- Tire Pressure Monitor System Reset: Looks up tire sensor IDs, resets tire pressure, and turns off the TPMS light.
- Gear Learning: Performs tooth learning for the car to turn off the MIL, especially after ECU or crankshaft sensor replacement.
- Injector Coding: Writes or rewrites injector codes in the ECU for accurate cylinder injection.
- Battery Maintenance System Reset: Resets the monitoring unit of the vehicle battery, clearing low battery fault information and performing battery matching.
- Diesel Particulate Filter (DPF) Regeneration: Clears PM from the DPF filter through combustion oxidation.
- Electronic Throttle Position Reset: Makes initial settings to throttle actuators and returns learned values to default.
- EGR Adaption: Learns the EGR valve after cleaning or replacement.
- Gearbox Matching: Completes gearbox self-learning to improve shift quality.
- AdBlue Reset (Diesel Engine Exhaust Gas Filter): Required after replacing or filling diesel exhaust treatment fluid (urea).
- Transport Mode: Deactivates transport mode to restore normal vehicle functions (e.g., limit vehicle speed, disable remote key).
- Windows Calibration: Performs door window matching to recover ECU initial memory and automatic ascending/descending functions.
Additional Functions:
- FRM Match
- ECU Reset
- Clutch Match
- Gateway Module Data Calibration
- Rain Light Sensor
- Turbo Match
- AC System Relearn
- Headlamp
- Air Level Calibration
- Coolant Bleeding
- Crank Position Sensor Adaptive Learning
- Engine Power Balance
- GPF Regeneration
- HV Battery Diagnostics
- Intelligent Cruise Control System
- Language Change
- Motor Angle Calibration
- Nox Sensor Reset
- Seat Occupancy Calibration
- Stop/Start Reset
- Sunroof Reset
- Tire Reset
6. Maintenance
6.1 Software Update
This module allows you to update the diagnostic software, application (APP), and frequently used software.
6.1.1 Update Diagnostic Software & APP
Go to Software Update on the Job Menu and tap the Car model tab. The tab displays a list of vehicle diagnostic software. Tap Update to start downloading and automatic installation.
6.1.2 Update IMMO&IMMO PROG Software
If you only need to update IMMO&IMMO PROG software, go to Software Update and tap the IMMO tab.
6.1.3 Renew Subscription
If your software subscription is due or expires, the system will prompt you to renew. Tap Renewal to enter the payment screen. Payment options include PayPal, Subscription Renewal Card, and Credit Card.
6.2 Other Modules
6.2.1 Toolbox
- BST360 (Battery Tester): For faster battery detection. Requires a specific Bluetooth battery tester (sold separately).
- Videoscope: For inspecting unseen parts of the engine, fuel tank, or braking system. Requires a compatible Videoscope device (sold separately).
- S2-2 Sensorbox: Diagnoses and simulates vehicle sensor faults. Requires a compatible S2-2 Sensorbox (sold separately).
- S2-2 Multimeter: Measures physical parameters like voltage, resistance, and frequency. Uses the same hardware as the S2-2 Sensorbox.
For more details on these modules, refer to their respective User Manuals.
6.2.2 User Info
Manages personal information and VCI settings.
- My Report: View, delete, or share saved reports (Health Reports, Recorded Data, Remote Reports).
- VCI: Manage activated VCI devices.
- VCI Management: Deactivate VCI pairing via Bluetooth.
- Activate VCI: Activate the VCI device if skipped during product sign-up, using Serial Number and Activation Code.
- Firmware Fix: Upgrade and fix diagnostic firmware. Do not interrupt power during this process.
- My Order: Check the status of your orders.
- Subscription Renewal Card: Check the status of your subscription renewal card.
- Profile: View and configure personal information.
- Change password: Modify your login password.
- Settings: Configure application settings and view software version information. Includes Units (Metric/English), Shop Information, and Printer Set.
- Diagnostic Software Clear: Hide/clear infrequently used diagnostic software to free up space.
7. Troubleshooting (FAQ)
7.1 How to save power?
- Turn off the screen when the tool is idle.
- Set a shorter standby time.
- Decrease the screen brightness.
- Turn off WLAN if not required.
- Disable GPS function if not in use.
7.2 Communication error with vehicle ECU?
Confirm the following:
- Diagnostic connector is correctly connected.
- Ignition switch is ON.
- If all checks are normal, send vehicle year, make, model, and VIN to customer service via the Feedback feature.
7.3 Failed to enter into vehicle ECU system?
Confirm the following:
- Vehicle is equipped with this system.
- VCI dongle is correctly connected.
- Ignition switch is ON.
- If all checks are normal, send vehicle year, make, model, and VIN to customer service via the Feedback feature.
7.4 What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If the software is still in English, it indicates that the software for your chosen language is still under development.
7.5 How to retrieve the login password?
- Tap the application icon on the home screen to launch it.
- Tap Login on the upper right corner of the screen.
- Tap Retrieve password.
8. Specifications
8.1 Display Tablet
| Feature | Specification |
|---|---|
| Operating system | Android 10.0 |
| Memory | 4GB |
| Storage | 64GB |
| Screen | 8 inch capacitive touch screen with a resolution of 1280*800 pixels |
| Camera | Rear-facing 8.0MP camera |
| Connectivity | Wi-Fi (802.11a/b/g/n/ac), Bluetooth |
| Working temperature | 0°C ~ 50°C |
| Storage temperature | -20°C ~ 70°C |
| Battery | 6300mAh Built-in Battery |
| Processor | 4-Core, 2.0GHz |
8.2 VCI Connector
| Feature | Specification |
|---|---|
| Working voltage | 9~18V |
| Power consumption | <2.0W |
| Working temperature | -10°C ~ 50°C |
| Relative humidity | 20% ~ 90% |
| Protocol | CAN-FD/DoIP |
8.3 Package List (Reference Only)
The actual accessories may vary by destination. Consult the seller or check the packing list supplied with your tool.
| No. | Item | Descriptions | Qty. |
|---|---|---|---|
| 1 | Display tablet | Central processing and display unit | 1 |
| 2 | VCI connector | Vehicle communication interface device | 1 |
| 3 | Diagnostic cable | Connects VCI to vehicle's OBD II diagnostic socket | 1 |
| 4 | Password envelope | Contains product Serial Number and Activation Code | 1 |
| 5 | X-PROG 3 immobilizer programmer kit | Includes X-PROG 3 immobilizer programmer and accessories | 1 |
| 6 | Power adaptor | Charges the tablet via AC outlet | (Optional) |
| 7 | Type-A to Type-C USB cable | Connects diagnostic tool to AC outlet/PC or VCI to diagnostic tool | 1 |
| 8 | Battery clamps cable | Supplies power to non-16pin connector from vehicle's battery | (Optional) |
| 9 | Cigarette lighter cable | Supplies power to non-16pin connector from cigarette lighter receptacle | (Optional) |
| 10 | OBD I adaptor box | Connects diagnostic cable and non-16pin adaptor cable | (Optional) |
| 11 | Non-16pin adaptor cable kit | For different vehicle diagnostic sockets, may require specific connectors within the kit. | (Optional) |
9. User Tips
To maximize the performance and longevity of your Launch X431 IMMO Elite, consider the following user tips:
- Regular Software Updates: Always keep your diagnostic software and applications updated to ensure compatibility with the latest vehicle models and access to new features.
- Maintain Stable Network Connection: A stable Wi-Fi connection is crucial for online functions like Intelligent Diagnose, remote diagnosis, and software updates.
- Proper VCI Connection: Ensure the VCI connector is securely attached to the vehicle's DLC and removed after use to prevent damage.
- Battery Care: Charge the tablet regularly and avoid letting the battery completely drain. Adjust screen brightness and standby time to conserve battery life.
- Data Backup: Regularly save diagnostic reports and recorded data streams for future reference and comparison.
- Consult X-PROG 3 Manual: For detailed key programming operations, always refer to the dedicated X-PROG 3 User Manual.
10. Warranty & Support
10.1 Warranty Information
LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is limited to persons who purchase LAUNCH products for resale or use in the ordinary course of business.
The warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.
Final determination of defects will be made by LAUNCH according to stipulated procedures.
10.2 Customer Service
If you have any questions regarding the operation of the unit, please contact your local dealer or customer service center:
- Tel: 86-755-25938674
- E-mail: DOD@cnlaunch.com
For a comprehensive guide, you can also refer to the official User Manual (PDF) available at: Launch X431 IMMO Elite User Manual (PDF).