HIKVISION DS-2DE2A404IWG1-E/W

Contents

Hikvision DS-2DE2A404IWG1-E/W 4MP PTZ IP Camera User Manual

Model: DS-2DE2A404IWG1-E/W

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Hikvision DS-2DE2A404IWG1-E/W 4MP 4X IR Mini Outdoor WiFi AcuSense PTZ Camera. Please read this manual carefully before using the product and keep it for future reference.

Hikvision 4MP PTZ Camera with key features highlighted

Figure 1: Hikvision DS-2DE2A404IWG1-E/W Camera and its key features: 4MP resolution, Human & Vehicle Detection, IP66 weather resistance, Two-way Audio, 20m IR night vision, and Mobile App compatibility.

Key Features:

  • High quality imaging with 4 MP resolution
  • Focuses on human and vehicle classification based on deep learning (AcuSense)
  • Excellent low-light performance via powered-by-DarkFighter technology
  • 4x optical zoom for closer viewing
  • Built-in microphone and speaker for real-time two-way audio
  • Up to 20 m IR range for night safety
  • Supports Wi-Fi connection (for -E/W model) and easy installation
  • Built-in memory card slot, up to 512 GB
  • Water and dust resistant (IP66) and vandal proof (IK10)

2. Safety Information

⚠ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

  • Ensure the power supply is within the specified range (12 VDC).
  • Do not expose the camera to extreme temperatures, humidity, or corrosive environments.
  • Avoid pointing the lens directly at strong light sources to prevent damage to the sensor.
  • Handle the camera with care; do not drop or subject it to strong physical shock.
  • All installation and service should be performed by qualified personnel.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your dealer.

Hikvision Mini PTZ Camera in its retail box

Figure 2: Camera unit and packaging.

  • Hikvision DS-2DE2A404IWG1-E/W Camera Unit
  • Mounting Screws and Plugs
  • Quick Start Guide (or this digital manual)
  • Waterproof Connector (if applicable)
  • Drill Template

4. Setup and Installation

4.1. Camera Overview and Connections

Rear view of Hikvision PTZ camera showing power, network, and audio cables

Figure 3: Camera rear view with integrated cables for power, network (RJ45), and audio input/output.

  • Power Input: Connect to a 12 VDC power supply or a PoE (Power over Ethernet) injector/switch (802.3af).
  • Ethernet Port (RJ45): Connect to your network for data transmission and PoE (if used).
  • Audio Input/Output: For external microphone/speaker connections (if required).
  • Reset Button: Located internally, typically accessed by opening the dome. Used to restore factory defaults.

4.2. Installation Methods

The camera supports various mounting options. Ensure the mounting surface is strong enough to support the camera's weight.

Diagram showing camera dimensions and mounting points

Figure 4: Camera dimensions and base mounting points (Unit: mm). The base has a 1/4-20UNC thread and multiple screw holes for secure attachment.

Refer to the following table for compatible accessories and mounting types:

Mounting TypeAccessory ModelDescription
Wall MountingDS-1294ZJ-PTWall mount bracket
Pendant MountingDS-1297ZJ-M, DS-1297ZJ, DS-1297ZJ-ES, DS-1299ZJVarious pendant mount options

General Installation Steps:

  1. Prepare the Mounting Surface: Use the provided drill template to mark the screw holes. Drill pilot holes if necessary.
  2. Attach the Bracket (if applicable): Secure the chosen mounting bracket to the wall or ceiling using appropriate screws and anchors.
  3. Route Cables: Pass the necessary cables (Ethernet, power) through the cable entry hole of the bracket or camera base.
  4. Mount the Camera: Attach the camera unit securely to the bracket or directly to the mounting surface. Ensure it is firmly fixed.
  5. Adjust Angle: Loosen the adjustment screws to set the desired pan, tilt, and rotation angle. Tighten the screws once adjusted.
  6. Waterproofing: For outdoor installations, ensure all cable connections are properly waterproofed using the provided waterproof accessories or electrical tape.

4.3. Initial Network Configuration

  1. Connect to Network: Connect the camera to your network via an Ethernet cable.
  2. Power On: Apply power to the camera (via PoE or 12V DC adapter).
  3. Find the Camera: Use Hikvision's SADP (Search Active Devices Protocol) tool on a computer connected to the same network to find the camera's IP address.
  4. Activate the Camera: If the camera is new, you will need to set a strong password to activate it.
  5. Configure Network Settings: Assign a static IP address or ensure DHCP is correctly configured.
  6. Access via Web Browser: Open a web browser and enter the camera's IP address to access its web interface. Log in with your credentials.

5. Operating the Camera

5.1. Mobile App (Hik-Connect)

The Hik-Connect app allows you to view live feeds, playback recordings, and receive alarm notifications on your mobile device.

Screenshot of Hik-Connect app interface showing live view, playback, and alerts

Figure 5: Hik-Connect mobile application interface for remote monitoring.

  1. Download App: Download and install the Hik-Connect app from your device's app store (iOS/Android).
  2. Register/Login: Create a new account or log in to your existing Hik-Connect account.
  3. Add Camera: Scan the QR code on the camera (usually on a label) or manually add the camera using its serial number or IP address.
  4. Live View & Control: Once added, you can view the live feed, control PTZ functions (Pan, Tilt, Zoom), and access other settings.

5.2. Two-Way Audio

The camera features a built-in microphone and speaker for real-time two-way communication.

Person using a smartphone to talk through the camera, showing a delivery scenario

Figure 6: Using the two-way talk feature via the mobile app.

  • Access the two-way audio function through the camera's web interface or the Hik-Connect app.
  • Ensure microphone and speaker volumes are adjusted appropriately.

5.3. Night Vision (IR)

The camera provides up to 20 meters of IR night vision for clear imaging in low-light or no-light conditions.

Night vision view of a garden and house

Figure 7: Example of 20m IR night vision capability.

  • The camera automatically switches between day (color) and night (black & white IR) modes based on ambient light.
  • Smart Supplement Light ensures even illumination and prevents overexposure.

5.4. WDR & 3D DNR Technology

These technologies enhance image quality in challenging lighting conditions.

Comparison of WDR and 3D DNR effects on image quality

Figure 8: Visual comparison of WDR (Wide Dynamic Range) and 3D DNR (Digital Noise Reduction) effects. WDR improves clarity against strong backlight, while 3D DNR reduces image noise for sharper images.

  • WDR (Wide Dynamic Range): Provides clear imaging against strong backlight.
  • 3D DNR (Digital Noise Reduction): Delivers clean and sharp images by reducing digital noise, especially in low-light conditions.

6. Maintenance

  • Cleaning: Gently wipe the camera lens with a soft, clean cloth. If necessary, use a cloth dampened with a mild detergent. Do not use strong chemicals or abrasive cleaners.
  • Firmware Updates: Regularly check the Hikvision official website for firmware updates to ensure optimal performance and security. Follow the provided instructions for updating firmware.
  • Cable Inspection: Periodically inspect all cables for any signs of wear, damage, or corrosion, especially for outdoor installations.
  • Environmental Check: Ensure the camera's environment remains within its operating temperature and humidity specifications.

7. Troubleshooting

ProblemPossible CauseSolution
No image/No powerPower supply issue, cable disconnectedCheck power adapter/PoE, ensure all cables are securely connected.
Cannot connect to networkIncorrect IP address, network cable issue, firewall blockingVerify IP settings, check network cable, temporarily disable firewall for testing. Use SADP tool.
Poor image qualityDirty lens, incorrect focus, low bandwidth, lighting issuesClean lens, adjust focus, check network bandwidth, adjust camera image settings (WDR, DNR).
PTZ control not respondingNetwork latency, firmware issue, mechanical obstructionCheck network connection, update firmware, ensure no physical obstructions.
Wi-Fi connection issuesIncorrect Wi-Fi password, weak signal, router issuesVerify Wi-Fi credentials, ensure camera is within Wi-Fi range, restart router. Note: Direct Hik-Connect Wi-Fi connection is not supported.

If the problem persists, contact Hikvision technical support or your dealer.

8. Specifications

Camera

  • Image Sensor: 1/2.8" Progressive Scan CMOS
  • Max. Resolution: 2560 × 1440
  • Min. Illumination: Color: 0.005 Lux @ (F1.8, AGC ON), B/W: 0.001 Lux @ (F1.8, AGC ON), 0 Lux with IR
  • Lens: 2.8 to 12 mm, 4x Optical Zoom
  • FOV: Horizontal 99.4° to 32.8°, Vertical 51.7° to 18.4°, Diagonal 119.9° to 37.5°
  • Day & Night: IR cut filter

Illuminator

  • Supplement Light Type: IR
  • Supplement Light Range: Up to 20 m
  • IR Wavelength: 850 nm

PTZ

  • Movement Range (Pan): 0° to 355°
  • Movement Range (Tilt): 0° to 90°
  • Pan Speed: 0.1° to 50°/s (preset 50°/s)
  • Tilt Speed: 0.1° to 50°/s (preset 50°/s)
  • Presets: 300

Video

  • Video Compression: H.265+/H.265/H.264+/H.264
  • Main Stream: 25/30 fps @ 2560 × 1440
  • Wide Dynamic Range (WDR): 120 dB

Audio

  • Audio Compression: G.711, G.722.1, G.726, MP2L2, PCM, AAC-LC
  • Built-in Microphone: Yes (up to 5m range)
  • Built-in Speaker: Yes (up to 10m range)

Network

  • Protocols: IPv4/IPv6, HTTP, HTTPS, etc.
  • API: ONVIF (Profile S, G, T), ISAPI, SDK, ISUP
  • Network Storage: NAS (NFS, SMB/CIFS)

Wireless (Wi-Fi) - For -E/W Model Only

  • Wi-Fi Protocols: IEEE802.11b, 802.11g, 802.11n
  • Frequency Range: 2.4 GHz - 2.4835 GHz
  • Encryption Mode: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK

Interface

  • Ethernet Interface: 1 RJ45 10M/100M self-adaptive
  • On-board Storage: Built-in microSD/SDHC/SDXC slot, up to 512 GB

General

  • Power: 12 VDC, Max. 11.2 W; PoE (802.3af)
  • Dimensions: Ø130.7 mm × 103.6 mm (Ø5.15" × 4.00")
  • Weight: Approx. 560 g (1.23 lb.)
  • Operating Condition: -20 °C to 60 °C (-4 °F to 140 °F), Humidity 90% or less
  • Protection: IP66, IK10, TVS 4000V Lightning Protection

9. User Tips

  • For optimal Wi-Fi performance, ensure the camera is placed within good signal range of your router.
  • Regularly check the camera's field of view to ensure no new obstructions are blocking the view.
  • Utilize the AcuSense human and vehicle detection features to reduce false alarms.
  • Consider using a high-endurance microSD card for continuous recording.

10. Warranty and Support

For warranty information, technical support, and service, please refer to the official Hikvision website or contact your authorized Hikvision dealer.

Hikvision Official Website: www.hikvision.com

Support Email: support@hikvision.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.