MT Helmets Jarama

Contents

MT Helmets Jarama Retro Motorcycle Helmet User Manual

Model: Jarama

I. Safety & Compliance

WARNING

This product is a retro half helmet, designed to provide protection only to the top of the head, forehead, and parts of the sides. It does not protect the chin, jaw, or neck area. In the event of a high-speed impact, crash, or during competitive riding, it may still result in serious injury or death.

If the helmet shell shows cracks, dents, if the interior padding is damaged, or if buckles/goggle components are loose, you must immediately stop using and replace the helmet. A damaged helmet offers no protective capability.

This helmet is strictly prohibited for use in professional racing, off-road riding, high-speed racing (speeds >60 km/h), or extreme sports. The impact forces in such scenarios far exceed the helmet's protective limits.

Do not modify the helmet (e.g., drilling holes, attaching rigid accessories). Do not install devices such as headphones or cameras on the helmet, as this may compromise its structural integrity and protective performance.

II. Safety Information

  • Proper Wear: Before riding, always securely fasten the double D-ring buckle, ensuring the helmet fits snugly on your head. If the helmet feels loose or shifts during riding, stop immediately to adjust it. Never operate the buckle with one hand while riding.
  • User Limitations: This helmet is designed for adult head circumferences (55-60 cm). Children, pregnant women, and individuals with head sizes outside this range must choose a helmet of the appropriate size.
  • Service Life: The protective performance of a helmet is effective for 3-5 years from the date of purchase. It must be replaced periodically, even if undamaged, as the interior impact-absorbing materials degrade over time.
  • Complementary Protection: Always use this helmet in conjunction with other protective gear such as goggles, riding jackets, and knee guards. This helmet is not a substitute for other necessary protective equipment.

Product Overview

The MT Helmets Jarama is a vintage-inspired full-face helmet designed for urban commuting and casual riding. It features a high-performance ABS shell, clear shield, and efficient ventilation system. The helmet is ECE R22.06 and DOT certified, ensuring a high level of safety.

Key Features & Certifications

Image showing ECE R22.06, DOT, and 3C certifications, along with icons for Asian-Fit, Quickshift Visor, Multiples Fabrics, Glasses Slot, EPS Buffer Layer, Double D buckle, and Headset Slot.
Certifications and key features of the MT Helmets Jarama helmet.
  • Certifications: ECE R22.06, DOT Certified, 3C Certified, E-Mark.
  • Fit: Asian-Fit design for enhanced comfort.
  • Visor: Quickshift Visor mechanism for easy changes.
  • Interior: Multiples Fabrics for comfort, Glasses Slot for eyewear compatibility, EPS Buffer Layer for impact absorption, Retro Interior design.
  • Retention System: Double D buckle for secure fastening.
  • Additional Features: Headset Slot for communication devices, Laser Marking, Tail Vent for airflow.

Detailed Features

Detailed images of helmet features including windshield switch, visor mechanism, double D buckle, retro interior, laser marking, tail vent, and Bluetooth headphone slot.
Close-up views of the helmet's functional components.
  • Windshield Switch: For easy operation of the visor.
  • Visor Mechanism: Designed for smooth and quick visor changes.
  • Double D Buckle: A secure and reliable retention system.
  • Retro Interior: Comfortable and stylish inner lining.
  • Laser Marking: Indicates product details and certifications.
  • Tail Vent: Provides airflow for ventilation.
  • Bluetooth Headphone Slot: Integrated slot for easy installation of communication systems.

Safety Technology

Exploded view diagram of the helmet's EPS hierarchical design, showing outer and inner EPS layers for impact absorption.
EPS hierarchical design for Asian head circumference.

The helmet features an EPS hierarchical design, specifically optimized for Asian head circumferences. This design incorporates multiple track tests and laboratory data to ensure the outer EPS layer effectively absorbs kinetic energy generated by impact. The inner EPS layer reduces the displacement of the lining, and the use of a low-density outer layer and a high-density inner layer dual EPS system effectively protects the head. This dual EPS design improves safety compared to single-layer EPS designs.

Comparison chart of ECE22-05 and ECE22-06 security certifications, showing impact test results for standard, high, low, and oblique velocities.
ECE22-06 New security certification comparison.

The ECE22-06 certification represents a new standard for professional helmet safety. This involves comprehensive testing of the helmet's components, visor, chin rest, and overall structure under various impact scenarios, including high-speed, low-speed, oblique, and rotational impacts. The testing process utilizes advanced technologies and methods to ensure enhanced safety.

III. Usage & Maintenance

Correct Usage & Step-by-Step Instructions

1. Pre-Wearing Preparation

  • Helmet Condition Check: Inspect the shell for cracks, paint chips, or deformation. Ensure the goggles have no scratches or looseness. Check that the interior lining is clean and undamaged, and that the double D-ring buckle functions properly.
  • Fit Confirmation: If equipped with adjustable padding, adjust its thickness according to your head circumference to ensure a snug, comfortable fit without pressure points.

2. Wearing Procedure

  • Putting on the Helmet: Hold the helmet by both sides with your hands. Slide it slowly over your head from the top, aligning the front edge 1-2 cm above your eyebrows and ensuring the back edge conforms to the nape of your neck.
  • Fastening the Buckle: Thread the strap through both metal D-rings, then back through the inner D-ring. Pull it tight until only one finger can fit between the strap and your chin, ensuring the helmet does not move.

IV. Usage Limitations

1. Scenario Restrictions

  • Recommended Scenarios: Suitable only for low-speed (≤50 km/h) scenarios such as urban commuting and casual riding.
  • Prohibited Scenarios: Professional racing tracks, off-road riding, high-speed racing, long-distance motorcycle tours, and environments with poor visibility such as heavy rain or fog.

2. Environmental & Maintenance Restrictions

  • Avoid prolonged use in heavy rain or standing water, as a damp lining will compromise its shock-absorbing properties.
  • Do not use the helmet in extreme temperatures above 60°C (140°F) or below -10°C (14°F).
  • Do not clean the shell with organic solvents (e.g., gasoline, alcohol).
  • Do not machine wash the interior lining.
  • Do not store the helmet in direct sunlight or near heat sources to prevent material degradation and deformation.

V. Care & Storage Instructions

1. Cleaning

  • Shell: Wipe off dirt with a damp cloth and allow it to air dry naturally.
  • Interior Lining: If removable and washable, detach it and hand wash using a mild detergent. Allow it to air dry completely before reattaching. Avoid direct sunlight during drying.

2. Storage

  • Store the helmet in a dry, well-ventilated indoor area.
  • Avoid placing heavy objects on it or contact with sharp objects.
  • It is recommended to store it on a helmet stand or by hanging it to prevent shell deformation.

VI. Technical Specifications

AttributeValue
Brand NameMT Helmets
ModelJarama
Item TypeHelmets
Helmet StyleFull Face
Helmet MaterialABS
Quality CertificateECE-R22/06, DOT Certified, 3C Certified
CertificationE-Mark
Weight1.4 kg
GenderUnisex
High-concerned chemicalNone
OriginMainland China

Size Chart

Size chart for STINGER2 Series Helmets, showing head circumference in CM for snug, moderate, and loose fits across sizes S, M, L, XL, XXL, XXXL, XXXXL.
STINGER2 Series Helmet Size Recommendations. Note: Size data for manual measurement may deviate from the actual product.
Helmet SizeSMLXLXXLXXXLXXXXL
Snug fit (CM)57585960616263
Moderate fit (CM)56575859606162
Loose fit (CM)55565758596061

VII. Troubleshooting

  • Helmet feels loose or shifts: Immediately stop and adjust the D-ring buckle for a snug fit. Ensure padding is correctly positioned.
  • Visor scratches or is difficult to operate: Check the quickshift visor mechanism for debris. Clean the visor with a soft cloth and mild soap. If heavily scratched, consider replacing the visor.
  • Interior lining discomfort or odor: Remove and hand wash the interior lining with mild detergent. Ensure it is completely dry before reattaching.
  • Reduced ventilation: Check the tail vent for any obstructions and ensure it is open.

VIII. User Tips

  • Quality and Aesthetics: Users appreciate the high quality and attractive retro design of the helmet. It is often considered worth the wait for its overall appeal.
  • Visor Options: The helmet typically comes with a transparent visor. If you desire visors in other colors, contact customer service to check availability and purchase them separately.

IX. Frequently Asked Questions (FAQ)

  • Q: Is this helmet suitable for high-speed racing?
    A: No, this helmet is designed for low-speed urban commuting and casual riding (speeds ≤50 km/h). It is not suitable for professional racing or high-speed activities.
  • Q: Can I install a Bluetooth communication system?
    A: Yes, the helmet features an integrated Bluetooth headphone slot for easy installation of communication devices.
  • Q: How often should I replace my helmet?
    A: The protective performance is effective for 3-5 years from the date of purchase. It should be replaced periodically, even if undamaged, as impact-absorbing materials degrade over time.
  • Q: What should I do if the helmet gets wet in heavy rain?
    A: Avoid prolonged use in heavy rain. If the lining gets damp, ensure it is thoroughly air-dried before next use to maintain its shock-absorbing properties.

X. Product Videos

Official product video demonstrating the unboxing, assembly, and key features of the MT Helmets Jarama helmet.

XI. Item Guides & Documents

A detailed user manual is available in PDF format for further reference:

XII. Warranty & Support

For warranty information, technical support, or any product-related inquiries, please refer to the manufacturer's official website or contact the seller directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.