NINIVISION KT-EDSO-2L2S-YH

Contents

NINIVISION 4K 8MP Dual Lens Solar 4G SIM Card PTZ Camera

Model: KT-EDSO-2L2S-YH

Please read this instruction manual carefully before using the product and keep it for future reference.

1. Introduction

Thank you for choosing the NINIVISION 4K 8MP Dual Lens Solar 4G SIM Card PTZ Camera. This advanced surveillance camera offers high-resolution video, flexible pan-tilt-zoom control, solar power for continuous operation, and 4G connectivity for remote monitoring without Wi-Fi. Designed for both indoor and outdoor use, it features IP66 weatherproofing, two-way audio, and intelligent human detection to enhance your security.

NINIVISION 4K 8MP Dual Lens Solar 4G SIM Card PTZ Camera with solar panel and feature icons.
The NINIVISION 4K 8MP Dual Lens Solar 4G SIM Card PTZ Camera, highlighting its key features like PTZ control, PIR detection, 4G connectivity, IP66 waterproof rating, and two-way audio.

2. Safety Information

⚠️️Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

  • 4K 8MP Dual Lens Solar 4G SIM Card PTZ Camera Unit
  • Solar Panel
  • Mounting Bracket
  • Charging Cable
  • User Manual (this document)
  • Installation Accessories (screws, etc.)
Components of the camera package including the camera, solar panel, and accessories.
Overview of the camera unit, solar panel, and included accessories.

4. Specifications

FeatureSpecification
Model NumberKT-EDSO-2L2S-YH
Brand NameNINIVISION
High Definition8.0 Megapixels (4K)
Lens QuantityDual Lens (4MP + 4MP)
Lens (mm)3.6mm
SensorCMOS
StyleDome Camera
InstallationNormal
Power SupplyNormal (Solar Panel + Built-in 18650 rechargeable battery)
Connectivity4G (SIM Card network: B1/B3/B5/B8/B38/B39/B40/B41)
Supported Mobile SystemsAndroid, iOS
Supported Operating SystemsNo (Mobile App only)
Viewing Angle360° (Pan 355° / Tilt 90°)
Night Vision30m, 12 x IR white light (Full Color, IR, Intelligent modes)
PIR DetectionSupport (10m / 32ft, 100 degree detection)
Two-Way AudioSupport (Built-in microphone and speaker)
Alarm TypeLocal Alarm
APP Remote ViewingEseeCloud APP
StorageCloud Storage (subscription required), Local storage (up to 256G micro SD card, not built-in)
Weatherproof RatingIP66
Operating Temperature-20°C to 60°C (4°F to 140°F)
Running Time (Battery)10 months (calculated by triggering 3 events per day)
Battery StandbyUp to 365 days

Note: 4G version camera does not work in Chile, Japan, USA, Canada, Colombia, Peru.

5. Setup Guide

5.1. App Download and Installation

To begin, download the EseeCloud app on your mobile device:

  1. Scan the QR code below with your mobile phone to download and install the "EseeCloud" app.
  2. Follow the app prompts to complete user registration.
QR code for EseeCloud app download.
Scan this QR code to download the EseeCloud app.

5.2. Pre-use Settings

  1. For products with batteries, ensure the power switch is in the "ON" position. For products without batteries, connect the camera to the provided power adapter or another power source.
  2. If connecting via Wi-Fi (not applicable for this 4G model, but general advice), place the camera within 2 meters of the router.
  3. Ensure your mobile phone is connected to the correct Wi-Fi network and you know the exact Wi-Fi password (if applicable for initial setup or app access).

5.3. Adding the Device (4G Camera)

This camera is a 4G version, which requires a SIM card for connectivity.

  1. Power On: Connect the device to a power supply to ensure it powers on normally.
  2. Insert SIM Card: The 4G camera can only connect after inserting a SIM card. Please insert a data-enabled SIM card first.
  3. Scan to Add: In the EseeCloud app, navigate to the automatic search interface and click 'Scan to add' to enter the scan code interface.
  4. Scan QR Code: Scan the QR code located on the body of the device.
  5. Follow On-screen Guidance: Add the device according to the instructions provided in the app.
Diagram showing 4G camera connectivity via SIM card, excluding WiFi and Ethernet.
The 4G camera connects via a local SIM card, not Wi-Fi or Ethernet.

5.4. Physical Installation

The camera comes with a mounting bracket for easy installation. Choose a suitable outdoor location with good solar exposure for the solar panel. Ensure the camera has a clear line of sight to the area you wish to monitor.

  1. Attach the mounting bracket to a sturdy surface (wall, pole, etc.) using appropriate screws.
  2. Secure the camera unit to the mounting bracket.
  3. Adjust the solar panel to face direct sunlight for optimal charging.
Solar PTZ camera mounted outdoors, showing its weather resistance.
The solar PTZ camera installed outdoors, demonstrating its weather-resistant design.

6. Operation

6.1. PTZ Control

The camera supports Pan-Tilt-Zoom (PTZ) functionality, allowing you to remotely adjust its viewing angle. You can rotate the camera 355° horizontally and 90° vertically directly from the EseeCloud app.

Smartphone screen showing PTZ controls for the camera.
Control the camera's pan (355°) and tilt (90°) directly from the EseeCloud app.

6.2. Two-Way Audio

The camera features a built-in microphone and speaker, enabling clear two-way voice communication. You can listen to the environment around the camera and speak through the camera using the EseeCloud app.

Image illustrating two-way audio feature with a person speaking through the camera.
Engage in real-time two-way conversations through the camera using the app.

6.3. Night Vision Modes

The camera is equipped with 12 IR white lights, providing up to 30 meters of night vision. It offers three night vision modes:

  • Infrared Night Vision: Standard black and white night vision.
  • Color Night Vision: Displays colorful vision at night when the white LED light is on.
  • Intelligent Night Vision: Automatically switches between IR and color night vision based on detected activity.
Comparison of infrared, color, and intelligent night vision modes.
Choose from Infrared, Color, or Intelligent night vision modes for optimal visibility in low-light conditions.

6.4. PIR Human Detection

The camera features a Passive Infrared (PIR) sensor with a 10-meter (32ft) and 100-degree detection range. When human movement is detected in the monitoring area, the camera will immediately capture a picture and send an alarm notification to your EseeCloud app.

Image showing PIR human detection in action, with a person highlighted.
Receive instant alerts on your phone when human motion is detected.

6.5. Remote Access and Multi-user Sharing

You can access your camera feed remotely from anywhere in the world using the EseeCloud app on your Android or iOS device. The camera also supports multi-screen sharing, allowing up to 4 family members to view the feed simultaneously.

Multiple users accessing the camera feed remotely on different devices.
Share access to your camera with family members for collective home security.

6.6. Dual Lens and Dual Screen Preview

This camera features a unique dual-lens system, combining a wide-angle fixed-focus lens with a PTZ rotating lens. This allows for a dual-screen preview in the app, showing both a fixed-point monitoring view and a PTZ rotating monitoring view simultaneously, providing more comprehensive detail.

Dual-lens dual-screen preview showing both fixed and PTZ views.
View both a wide-angle and a zoomed-in PTZ view simultaneously for enhanced monitoring.
Diagram explaining the 4MP dual lens setup.
The camera utilizes two 4MP lenses for a combined 8MP resolution and dual-view capability.

Video demonstrating the camera's features, including physical overview, solar panel connection, dual-lens functionality, PIR detection, IP66 waterproof rating, night vision modes, and multi-user remote access.

7. Maintenance

  • Solar Panel: Regularly clean the surface of the solar panel to ensure maximum sunlight absorption and efficient charging. Remove any dust, dirt, or debris.
  • Camera Lens: Gently wipe the camera lenses with a soft, clean cloth to remove smudges or dirt that might affect image clarity.
  • Weatherproofing: Periodically check the camera's housing and seals for any signs of wear or damage to maintain its IP66 waterproof integrity.
  • Firmware Updates: Check the EseeCloud app regularly for any available firmware updates to ensure optimal performance and security.

8. Troubleshooting

  • Camera not connecting to 4G: Ensure the SIM card is correctly inserted, is data-enabled, and has an active plan. Verify that the camera is powered on.
  • Poor image quality: Check if the camera lens is clean. Ensure there is sufficient light in the environment or that night vision is active if it's dark.
  • PIR detection not working: Verify that PIR detection is enabled in the app settings. Ensure there are no obstructions in the detection area.
  • Battery not charging: Check if the solar panel is clean and receiving direct sunlight. Ensure the solar panel cable is securely connected to the camera.
  • App issues: Ensure your EseeCloud app is updated to the latest version. Try restarting the app or your mobile device.

9. User Tips

  • For optimal solar charging, mount the solar panel in a location that receives direct sunlight for most of the day, ideally facing south (in the Northern Hemisphere) or north (in the Southern Hemisphere).
  • When setting up human detection, adjust the sensitivity in the app to minimize false alarms from pets or swaying branches.
  • Utilize the dual-screen feature to keep an eye on a wide area with the fixed lens while using the PTZ lens to zoom in on specific points of interest.

10. FCC Compliance Declaration

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

  • Reorient or reposition the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance may cause the user to lose operation. Or modifications not expressly approved by the manufacturer responsible for compliance could cause the user to lose the right to operate the equipment.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

© 2024 NINIVISION. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.