XINTUSHENG LED License Plate Light Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your new XINTUSHENG LED License Plate Lights. Please read this manual thoroughly before installation and keep it for future reference.

2. Safety Information

ATTENTION: Not suitable for children under three years.
ATTENTION: Do not swallow small parts, to prevent choking.
ATTENTION: Do not disassemble the product to prevent electric shock or damage to the vehicle.
Always ensure the vehicle's power is off before attempting installation or maintenance.
Wear appropriate safety gear, such as gloves and eye protection, during installation.

3. Product Overview

The XINTUSHENG LED License Plate Light is designed to provide bright, efficient, and long-lasting illumination for your vehicle's license plate. These lights are a direct replacement for many OEM halogen bulbs, offering enhanced visibility and a modern aesthetic.

Key Features:

High brightness LED chips with low power consumption.
Built-in Canbus decoder ensures no O.B.C (On-Board Computer) errors or bulb-out warning messages.
No computer reprogramming needed for installation.
IP67 waterproof rating, providing protection against water, snow, and dust.
Designed for a perfect fit with the original car structure.
Up to 5 times brighter than standard halogen lights.
Constructed from durable anti-scratch PC plastic.
Ultrasonically sealed for enhanced durability and weather resistance.
Plug-and-play installation without any modifications.
Greatly improves safety and visibility for your ride at night.

XINTUSHENG LED License Plate Lights installed on a car and close-up of the product — Figure 3.1: XINTUSHENG LED License Plate Lights and their appearance when installed.

Close-up view of the two LED license plate lights, showing front and back — Figure 3.2: Front and rear view of the LED License Plate Light units.

Collage of cars with LED license plate lights installed at night — Figure 3.3: Demonstration of LED License Plate Light brightness on various vehicles at night.

4. Specifications

Attribute	Value
Product Name	LED License Plate Light
Brand Name	XINTUSHENG
Item Type	License Plate Lights
Voltage	12 V (9-15V DC)
Lumens	30lm
Wattage	3W
Item Weight	0.07KG
Light Color	White
Emitting Color	White
Material	ABS+PC
Waterproof Rating	IP67
Certifications	CE / RoHS / Emark
Dimensions (approx.)	77mm (3.03 inches) x 28mm (1.1 inches)

Image detailing light source (LED), emitting color (White), and material (ABS+PC) — Figure 4.1: Product details including light source, emitting color, and material.

Product dimensions: 3.03 inches (77mm) length, 1.1 inches (28mm) height — Figure 4.2: Detailed product dimensions.

Vehicle Compatibility:

These LED License Plate Lights are compatible with a wide range of vehicles. Please verify your vehicle's OEM part number against the provided list to ensure compatibility.

For Volkswagen: Golf 4 (1998-2002), Golf 5 (2003-2008), Golf 6 (2008-2012), Golf 7 (2012-2017), Scirocco (2009-2017), Eos (2006-2016), New Beetle (2006-2010), Beetle (2012-2019), Crafter / e-Crafter (2017-2022), Passat B6 B7 B8 Sedan Only (2005-2022), Passat CC (2009-2017), Polo (2002-2022), Amarok (2013-2020), T-Roc (2018-2022), Arteon (2017-2022), Phaeton (2003-2016), Lupo (1999-2006).
For Seat: Altea (5P1.5P5) (2004-2015), Exeo (3R2.3R5) (2008-2013), Ibiza MK4 6J (2008-2015), Ibiza MK4 6P (2015-2017), Ibiza MK5 6F (2017-2020), Leon MK2 1P1 (2005-2012), Leon MK3 5F (2012-2020), Toledo MK4 KG3 (2012-2020).
For Skoda: Superb II (2009-2013) (Sedan Only).
For Audi: Q8 (2019-2022), R8 (2007-2022).
For Porsche: 987 Boxster (2005-2008), 987-2 Boxster (2009-2010), 987C Cayman (2006-2008), 987C2 Cayman (2009-2010), 997-1 911 Carrera (2005-2008), 997-2 911 Carrera (2009-2010), 997T 911 Turbo/GT2 (2009-2010), 997T2 911 Turbo (2010-2011), Carrera GT (2004-2006), 911 GT3-1 (1999-2004), 991 GT3-2 (2007-2010), Cayenne 958 (2013-up), 9PA Cayenne (2003-2006) (First Gen. with handing spare wheel), 9PA1 Cayenne (2007-2010) (facelift first Gen. with handing spare wheel).

Replaces OEM Part Numbers: 1K8943021, 1K8943021A, 1K8943021B, 1K8943021C, 1K8943021D, 1J6943021, 1J6943021B, 1JE943021, 1JE943021A, 1C9943021, 3C5943021, 3D0943021A, 7L6943021, 5F9943021, 420943021, 99763162002, 420943021, 35D943021A.

5. Installation

The XINTUSHENG LED License Plate Lights are designed for a simple plug-and-play installation. No modifications to your vehicle's wiring are typically required.

General Installation Steps:

Ensure your vehicle's ignition is off and the parking brake is engaged.
Carefully remove the entire OEM (Original Equipment Manufacturer) rear license plate lamp assembly from your vehicle. This usually involves unclipping or unscrewing the existing housing.
Disconnect the electrical connector from the OEM halogen bulb.
Connect the new LED License Plate Light's connector to the vehicle's electrical socket. Ensure a secure connection.
Insert the new LED License Plate Light assembly into the original mounting location. Ensure it clicks or screws into place securely.
Test the lights by turning on your vehicle's headlights or parking lights.

T10 Connection Method (Refer to Figure 5.1):

For vehicles using a T10 bulb type, follow these specific steps:

Locate the OE connector (1).
Carefully take off the OE halogen bulb from its socket (2).
Insert the provided XINTUSHENG connector into the OE socket (3).
Put the OE socket back into the new LED light housing to prevent water ingress (4).

Installation diagram for T10 connection method, showing steps to replace an OE halogen bulb with the new LED light — Figure 5.1: T10 Connection Method for LED License Plate Lights.

Graphic illustrating IP67 waterproof rating, showing protection against water, snow, and dust — Figure 5.2: The IP67 waterproof design ensures durability in various weather conditions.

6. Operation

Once correctly installed, the XINTUSHENG LED License Plate Lights will operate automatically with your vehicle's existing lighting system. They will illuminate when your vehicle's parking lights or headlights are activated.

7. Maintenance

These LED license plate lights are designed for minimal maintenance. The IP67 waterproof and ultrasonically sealed construction protects internal components from environmental factors.

Cleaning: Periodically clean the outer lens with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the PC plastic.
Inspection: Occasionally check the lights for any signs of damage or loose connections.

8. Troubleshooting

Lights Not Working:
- Ensure the electrical connectors are securely plugged in.
- Verify that your vehicle's lights are turned on.
- Check the vehicle's fuse box for any blown fuses related to the license plate lights.
- Confirm that the product is compatible with your specific vehicle model and OEM part number.
Error Messages on Dashboard:
- These lights feature a built-in Canbus decoder designed to prevent error messages. If an error occurs, double-check the connection and ensure the product is fully compatible with your vehicle's electrical system.

9. User Tips

Before final installation, connect the lights and test them to ensure they function correctly.
When removing the old license plate lights, be gentle to avoid damaging the surrounding paint or trim.
Ensure the new lights are firmly seated to prevent rattling or water leaks.

10. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is also available for download: User Manual (PDF).