Introduction
The Tuya Zigbee Temperature and Humidity Sensor is a smart device designed for real-time monitoring of indoor environmental conditions. It accurately detects temperature and humidity, providing data that can be used for intelligent linkage with other smart home devices through the Smart Life APP, Google Assistant, and Amazon Alexa.
This sensor features high sensitivity, capable of detecting 0.1°C room temperature changes and 0.1% relative humidity changes, ensuring precise measurements.

The Tuya Zigbee Temperature and Humidity Sensor, compatible with various smart home platforms.
Package Contents
- Sensor x 1
- User manual x 1 (This document)
- Reset pin x 1
Setup Guide
1. Preparation for Use
- Ensure your mobile phone is connected to a Wi-Fi network.
- Verify that a compatible Zigbee smart host (gateway) has been successfully added to your smart home system.
- Place the sensor within the effective coverage area of your Zigbee smart host (gateway) to ensure a stable connection.

Connection diagram for initial setup.
2. Download and Install the App
- Search for "Smart Life" in your device's App Store (iOS) or Google Play Store (Android).
- Alternatively, scan the QR code below to download and install the Smart Life App.
- Open the App. If it's your first time, press the "Register" button to create an account. If you already have an account, press the "Login" button.

Scan this QR code to download the Smart Life App.
3. Network Access Setting (Adding the Device)
- Install the CR2450 button battery into the sensor.
- Ensure your mobile phone is connected to the network and your smart gateway has been successfully added to the Smart Life App.
- Open the Smart Life App. On the "Smart Gateway" page, click the "Add Sub Device" button.
- Select "Temperature and Humidity Sensor" from the list of devices.
- Use the provided reset pin to insert into the reset hole on the sensor (refer to the diagram below). Press and hold for more than 5 seconds until the indicator light flashes.
- Follow the remaining instructions in the App to complete the device pairing process.
- After successfully adding, you can find the device listed in the "My Home" section of the App.

Location of the reset hole on the sensor.
Operating Instructions
Once the sensor is successfully paired with your Zigbee gateway and the Smart Life App, you can monitor temperature and humidity in real-time and set up intelligent automation.
Real-time Monitoring
Open the Smart Life App and navigate to your sensor's page to view current temperature and humidity readings. The sensor provides readings with a minimum graduation value of 0.1°C for temperature and 0.1% for humidity, ensuring high accuracy.

Real-time temperature and humidity display in the Smart Life App.
Intelligent Linkage
Leverage the intelligent linkage feature to automate your home environment based on sensor data. This requires a Zigbee smart gateway and other compatible smart devices.
- Temperature Control: Set rules to automatically turn on an air conditioner when the temperature exceeds a certain threshold, or an electric heater when it drops too low.
- Humidity Control: Configure the system to activate a humidifier when the air becomes too dry.

Examples of smart automation based on sensor readings.
Placement and Use Cases
- Baby Room: Place the sensor in a baby's room to ensure the temperature and humidity remain within a comfortable and healthy range, automatically adjusting other devices as needed.
- Closet/Storage: Monitor humidity in closets or storage areas to prevent mold and mildew, receiving alerts if humidity levels become too high.

Monitoring environmental conditions in a baby's room.

Using the sensor to monitor humidity in a closet.
Maintenance
Battery Replacement
The sensor is powered by a CR2450 button battery. When the battery level is low, you may receive a notification in the Smart Life App. To replace the battery:
- Gently open the sensor casing.
- Remove the old CR2450 battery.
- Insert a new CR2450 battery, ensuring correct polarity.
- Close the sensor casing securely.
Resetting the Device
If you need to reset the device or re-pair it, follow the steps in the "Network Access Setting" section (Step 3 of Setup Guide), specifically using the reset pin to press the reset button for more than 5 seconds until the indicator flashes.
Troubleshooting
- Device not connecting/pairing:
- Ensure your mobile phone is connected to the internet.
- Verify that your Zigbee smart host (gateway) is powered on and successfully added to the Smart Life App.
- Make sure the sensor is within the effective range of your Zigbee gateway.
- Confirm that the sensor's indicator light flashes when the reset button is pressed for 5 seconds, indicating it's in pairing mode.
- Check the battery level; replace if necessary.
- Inaccurate readings:
- Avoid placing the sensor near heat sources (e.g., direct sunlight, heaters) or cold drafts (e.g., open windows, air conditioning vents) that could affect local readings.
- Ensure the sensor is not obstructed or covered, which could impede air circulation.
- App not showing data:
- Check your phone's internet connection.
- Ensure the Smart Life App is updated to the latest version.
- Restart the Smart Life App.
- Verify the Zigbee gateway is online and functioning correctly.
Specifications

Detailed product parameters and component overview.
| Attribute | Value |
|---|---|
| Product Name | Zigbee Temperature & Humidity Sensor |
| Product Model | IH-K009 |
| Operating Voltage | 3V |
| Wireless Protocol | Zigbee |
| Temperature Detection Range | -10°C ~ 50°C |
| Temperature Resolution | 0.1°C |
| Temperature Measurement Accuracy | ±0.3°C |
| Humidity Detection Range | 0% ~ 95%RH (no condensation) |
| Humidity Resolution | 1% |
| Humidity Measurement Accuracy | ±3% |
| Battery Type | CR2450 |
| Operating Temperature | -10°C ~ 55°C |
| Operating Humidity | 0% ~ 99%RH |
| Product Size | Φ 40 x 13 mm |
| Product Weight | About 17g |
| Is Smart Device | Yes |
| Style | Wall Hanging |
| Use | Indoor |
User Tips
- Optimal Placement: For the most accurate readings and effective smart automation, place the sensor in a central location within the room you wish to monitor, away from direct sunlight, heating/cooling vents, or open windows.
- Battery Life: To maximize battery life, ensure the sensor is within good range of your Zigbee gateway to avoid excessive power consumption from constantly searching for a connection.
- Smart Home Integration: Explore the full potential of your sensor by integrating it with other smart devices through the Smart Life App. Create custom scenes and automations for a truly intelligent environment.
- Regular Monitoring: Periodically check the sensor's readings in the app to understand your indoor climate patterns and make informed adjustments.
Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A PDF version of the user manual is available for download here.