1. Introduction
This manual provides detailed instructions for the COTAUL JCK Joycons Gamepad, a Bluetooth wireless joystick designed for use with Nintendo Switch, Nintendo Switch OLED, and Nintendo Switch Lite consoles. The gamepad features vibration, Turbo function, and a wake-up function for enhanced gaming experience.
Product Indication Chart
Refer to the diagram below for button identification:
- Select button: -
- Left joystick: L3 (Press the button)
- Direction button: Up, Down, Left, Right
- Screenshot button: Capture (marked with a camera icon)
- Start button: +
- Action button: A, B, X, Y, ZR, R
- Right joystick: R3 (Press the button)
- Home button: HOME (marked with a house icon)
2. Setup
2.1 Direct Connection to Console
- Place the joystick right side up. The upper right of the left gamepad has a "-" button, and the upper right of the right gamepad has a "+" button.
- Slide the gamepad from the top to the bottom along the sliding rail of the console screen until you hear a click sound. The console icon will indicate a successful connection.
2.2 Connecting to a Grip
To connect the gamepad to a grip, follow the same procedure as connecting to the console. Slide the gamepad from the top to the bottom along the sliding rail of the grip until you hear a click sound. The grips connected with the gamepad will light up on either side of the Nintendo Switch icon.
2.3 Detaching the Gamepad
To detach the gamepad from the device (console or grip), find the "uninstall button" on the back side of the gamepad. Slide the gamepad from the bottom to the top while holding the "uninstall" button until the gamepad is completely detached.
3. Operating Instructions
3.1 Wireless Connection
The gamepad can be connected wirelessly away from the sliding rail, functioning as a normal controller. One console can connect to a maximum of 10 control devices.
3.2 Wake Up Function
When the gamepad is separated from the console and goes into sleep mode, press any button on the gamepad to wake it up. The four LED indicators will flash. If not connected to the console within five seconds, it will return to sleep mode. To wake up the console from sleep mode, press the "HOME" button on the gamepad.
3.3 TURBO Function
The Turbo function allows for consecutive button presses. There are three speed gears: fast, medium, and slow. The default speed is slow.
- Manual Consecutive Fire: Press and hold the Turbo key + (UP, DOWN, LEFT, RIGHT, ZL, L for left handle, or A, B, X, Y, ZR, R for right handle), then press and hold the desired action key.
- Automatic Consecutive Fire: After setting manual consecutive fire, press and hold the Turbo key + (UP, DOWN, LEFT, RIGHT, ZL, L, A, B, X, Y, ZR, R) again.
- Cancel Consecutive Fire: Press and hold the Turbo key + (UP, DOWN, LEFT, RIGHT, ZL, L, A, B, X, Y, ZR, R) again.
- Clear All Consecutive Fire Functions: Press and hold the Turbo key for 5 seconds.
- Adjust TURBO Speed: Press and hold the TURBO key + rocker upward to increase burst frequency, or TURBO key + rocker downward to decrease burst frequency.
3.4 6-Axis Gyroscope
The gamepad is equipped with a built-in 6-axis gyroscope for extremely precise position control, suitable for various racing, shooting, and running games.
3.5 Dual Vibration
The gamepad features linear vibration with stronger amplitude, providing a more realistic and immersive game experience.
4. Maintenance
4.1 Charging the Gamepad
When the gamepad's power is low (battery voltage lower than 3.6V), the corresponding channel light will flash slowly, indicating that charging is required. To charge, install the gamepad onto the console. The battery icon on the console screen will indicate charging status. Once fully charged, the screen will return to black.
5. Troubleshooting
5.1 Gamepad Not Connecting or Responding
- Ensure the gamepad is properly slid onto the console or grip until a click is heard.
- If separated from the console, press any button to wake it up. If it doesn't connect within 5 seconds, it will re-enter sleep mode. Press the "HOME" button to attempt reconnection.
- Check the battery level. If low, charge the gamepad by attaching it to the console.
5.2 Automatic Sleep Mode
When the console screen is off, the gamepad will automatically enter sleep mode to conserve power. To wake it up, press the "HOME" button on the gamepad.
5.3 General Product Issues
If you encounter any problems with the product, please contact customer service. Many issues can be resolved through simple troubleshooting or by addressing potential misoperation. Customer service can provide solutions to help resolve the problem.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | COTAUL |
| Model Number | JCK |
| Type | Gamepads |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Compatible Platform | Nintendo Switch, iOS |
| Interface Type | Bluetooth |
| Battery Included | Yes |
| Battery Capacity | 450 mAh (per Joycon) |
| Charging Time | Approx. 2-3 Hours |
| Playing Time | Approx. 10-15 Hours |
| Trigger Button Type | Non-Linear |
| Sleep Electricity | <15uA |
| Working Electricity | <20mA |
| Working Voltage | 3.0V |
| Input Voltage | DC 4.5~5.5V |
| Charging Electricity | <500mA |
| Package Included | Yes |
| Origin | Mainland China |
7. User Tips
- For optimal performance, ensure your gamepad is fully charged before extended gaming sessions.
- Familiarize yourself with the Turbo function to gain an advantage in fast-paced games.
- If experiencing any input lag or disconnection, try re-attaching the Joycons to the console to re-establish a stable connection.
8. Warranty and Support
For any product issues or support inquiries, please contact customer service. Many common issues can be resolved with guidance from the support team.
Additional item guides and documents, including a user manual in PDF format, may be available. Please refer to the product page or contact customer support for access to these resources.
User manual (PDF): View PDF