Lemorele G98

Contents

Lemorele G98 2-in-4-out HDMI KVM Switch User Manual

Model: G98

1. Introduction

Thank you for choosing the Lemorele G98 HDMI KVM Switch. This device allows you to control two computers (hosts) using a single set of peripherals (keyboard, mouse, monitor, and other USB devices). It supports 4K@30Hz video output and ultra-fast 5Gbps USB 3.0 data transfer, making your workspace more efficient and organized.

Lemorele G98 HDMI KVM Switch overview

Figure 1: Lemorele G98 HDMI KVM Switch

2. Package Contents

Please check the box for the following items:

  • 1 x HDMI KVM Switch (G98)
  • 2 x USB A to A Cables
  • 1 x USB C to A Cable (for power)
  • 1 x User Manual

What's in the box for Lemorele G98 KVM Switch

Figure 2: Package Contents

3. Setup Instructions

Follow these steps to connect your devices to the KVM switch:

3.1 Device Layout

The KVM switch features the following ports:

  • Front Panel: 4 x USB 3.0 Ports (for peripherals)
  • Rear Panel:
    • 2 x HDMI IN Ports (HDMI IN 1, HDMI IN 2)
    • 1 x HDMI OUT Port (to monitor)
    • 2 x USB IN Ports (to connect to PC1, PC2)
    • 1 x USB-C Power Input Port (5V/1A)

Lemorele G98 KVM Switch connection diagram

Figure 3: KVM Switch Port Layout and Connection Diagram

3.2 Connection Steps

  1. Connect Monitor: Connect your monitor to the HDMI OUT port on the KVM switch using an HDMI cable.
  2. Connect Computers (Hosts):
    • Connect PC 1 to HDMI IN 1 and one of the USB IN ports on the KVM switch using the provided HDMI and USB A-A cables.
    • Connect PC 2 to HDMI IN 2 and the other USB IN port on the KVM switch using the provided HDMI and USB A-A cables.
  3. Connect Peripherals: Connect your keyboard, mouse, printer, SSD, U disk, or other USB devices to the 4 x USB 3.0 Ports on the front panel of the KVM switch.
  4. Power Supply (Optional but Recommended): Connect the provided USB-C cable to the USB-C Power Input Port on the KVM switch and to a 5V/1A USB power adapter (not included) or a USB port on one of your computers. While the switch can often operate without external power, a dedicated power supply ensures stable performance, especially with power-hungry USB devices or long HDMI cables.

Switching between PC1 and PC2 on Lemorele G98 KVM Switch

Figure 4: Example Setup with Two PCs

USB-C Power Supply port on Lemorele G98 KVM Switch

Figure 5: USB-C Power Input

4. Operating Instructions

4.1 Switching Between Computers

The Lemorele G98 KVM Switch features a one-click switching button:

  • To switch the active computer (host), simply short press the Switch Button located on the front panel of the KVM switch.
  • The LED indicator lights (Signal light 1, Signal light 2) will show which computer is currently active.

One-click switching on Lemorele G98 KVM Switch

Figure 6: One-Click Switching

4.2 Plug and Play

The KVM switch is designed for plug-and-play operation, requiring no driver installation for most operating systems (Windows, macOS, Linux).

Plug and Play setup with Lemorele G98 KVM Switch

Figure 7: Plug and Play Functionality

5. Maintenance

  • Keep the device in a cool, dry place away from direct sunlight and heat sources.
  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Avoid dropping or subjecting the device to strong impacts.
  • Ensure proper ventilation around the device.

6. Troubleshooting

  • No Display on Monitor:
    • Ensure all HDMI cables are securely connected.
    • Try using shorter, high-quality HDMI 2.0 cables.
    • Ensure the KVM switch is receiving adequate power, especially if using power-hungry USB devices. Connect the USB-C power cable.
    • Try restarting the connected computers.
  • USB Devices Not Working:
    • Ensure the USB IN cables from the computers to the KVM switch are securely connected.
    • Try connecting the USB-C power cable to the KVM switch.
    • Test the USB devices by connecting them directly to the computer.
    • Try connecting USB devices to different USB ports on the KVM switch.
  • Switching Issues:
    • Ensure all cables are properly connected.
    • Press the switch button firmly.
    • If the issue persists, disconnect all cables, wait a few seconds, and reconnect them.
  • Flickering or Poor Video Quality:
    • Ensure your HDMI cables are rated for 4K and are of good quality.
    • Check your monitor's resolution settings.
    • Ensure the KVM switch is powered via the USB-C port.

7. Specifications

FeatureSpecification
ModelG98
TypeHDMI KVM Switch
HDMI Input2 Ports (HDMI IN 1, HDMI IN 2)
HDMI Output1 Port (HDMI OUT)
USB Input (for Hosts)2 Ports (USB IN)
USB Output (for Peripherals)4 Ports (USB 3.0)
USB Data Transfer RateUp to 5Gbps (USB 3.0)
Max Resolution4K@30Hz
HDMI StandardHDMI 2.0 Compatible
Video BandwidthUp to 10.2Gbps
Power SupplyUSB-C 5V/1A (External Power Source: Yes)
Dimensions (L x W x H)116 x 58 x 18 mm (Approx. 19 x 16 x 3 cm packaged)
WeightApprox. 250g
Plug TypeUS Plug (for power adapter, if used)
CertificationCE
Transmission Distance (4K@30Hz)Input: 0.75-10 meters, Display: 0.75-5 meters
Transmission Distance (1080P@60Hz)Input: 0.75-24 meters, Display: 0.75-12 meters

8. Warranty and Support

For any warranty claims or technical support, please contact the seller or the Lemorele customer service team through your purchase platform. Please have your order number and product model (G98) ready when contacting support.

© 2024 Lemorele. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.